Re: [PATCH v2 2/9] clk: imx: vf610: Disable automatic clock gating for lpuart in LPSTOP mode

From: Michael Turquette
Date: Fri Jul 08 2016 - 14:40:36 EST


Quoting Bhuvanchandra DV (2016-06-27 22:32:28)
> From: Stefan Agner <stefan@xxxxxxxx>
>
> In order to allow wake support in STOP sleep mode, clocks are needed. Use
> imx_clk_gate2_cgr to disable automatic clock gating in low power mode STOP.
> This allows to enable wake by UART using:
> echo enabled > /sys/class/tty/ttyLP0/power/wakeup
>
> However, if wake is not enabled, the driver should disable the clocks explicitly
> to save power.
>
> Signed-off-by: Stefan Agner <stefan@xxxxxxxx>
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@xxxxxxxxxxx>

Applied.

Regards,
Mike

> ---
> drivers/clk/imx/clk-vf610.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
> index 3a1f244..0476353 100644
> --- a/drivers/clk/imx/clk-vf610.c
> +++ b/drivers/clk/imx/clk-vf610.c
> @@ -315,12 +315,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
>
> clk[VF610_CLK_PIT] = imx_clk_gate2("pit", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(7));
>
> - clk[VF610_CLK_UART0] = imx_clk_gate2("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7));
> - clk[VF610_CLK_UART1] = imx_clk_gate2("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8));
> - clk[VF610_CLK_UART2] = imx_clk_gate2("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9));
> - clk[VF610_CLK_UART3] = imx_clk_gate2("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10));
> - clk[VF610_CLK_UART4] = imx_clk_gate2("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9));
> - clk[VF610_CLK_UART5] = imx_clk_gate2("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10));
> + clk[VF610_CLK_UART0] = imx_clk_gate2_cgr("uart0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(7), 0x2);
> + clk[VF610_CLK_UART1] = imx_clk_gate2_cgr("uart1", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(8), 0x2);
> + clk[VF610_CLK_UART2] = imx_clk_gate2_cgr("uart2", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(9), 0x2);
> + clk[VF610_CLK_UART3] = imx_clk_gate2_cgr("uart3", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(10), 0x2);
> + clk[VF610_CLK_UART4] = imx_clk_gate2_cgr("uart4", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(9), 0x2);
> + clk[VF610_CLK_UART5] = imx_clk_gate2_cgr("uart5", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(10), 0x2);
>
> clk[VF610_CLK_I2C0] = imx_clk_gate2("i2c0", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(6));
> clk[VF610_CLK_I2C1] = imx_clk_gate2("i2c1", "ipg_bus", CCM_CCGR4, CCM_CCGRx_CGn(7));
> --
> 2.9.0
>