[PATCH 63/92] clocksource/drivers/vt8500: Convert init function to return error

From: Daniel Lezcano
Date: Tue Jun 28 2016 - 06:34:42 EST


The init functions do not return any error. They behave as the following:

- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly

or

- print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
---
drivers/clocksource/vt8500_timer.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index ddb4092..1bc8707 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -121,38 +121,48 @@ static struct irqaction irq = {
.dev_id = &clockevent,
};

-static void __init vt8500_timer_init(struct device_node *np)
+static int __init vt8500_timer_init(struct device_node *np)
{
- int timer_irq;
+ int timer_irq, ret;

regbase = of_iomap(np, 0);
if (!regbase) {
pr_err("%s: Missing iobase description in Device Tree\n",
__func__);
- return;
+ return -ENXIO;
}
+
timer_irq = irq_of_parse_and_map(np, 0);
if (!timer_irq) {
pr_err("%s: Missing irq description in Device Tree\n",
__func__);
- return;
+ return -EINVAL;
}

writel(1, regbase + TIMER_CTRL_VAL);
writel(0xf, regbase + TIMER_STATUS_VAL);
writel(~0, regbase + TIMER_MATCH_VAL);

- if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ))
+ ret = clocksource_register_hz(&clocksource, VT8500_TIMER_HZ);
+ if (ret) {
pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
- __func__, clocksource.name);
+ __func__, clocksource.name);
+ return ret;
+ }

clockevent.cpumask = cpumask_of(0);

- if (setup_irq(timer_irq, &irq))
+ ret = setup_irq(timer_irq, &irq);
+ if (ret) {
pr_err("%s: setup_irq failed for %s\n", __func__,
clockevent.name);
+ return ret;
+ }
+
clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
MIN_OSCR_DELTA * 2, 0xf0000000);
+
+ return 0;
}

-CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(vt8500, "via,vt8500-timer", vt8500_timer_init);
--
1.9.1