[PATCH v2] ARM: dts: sun7i: Add BCM53125 switch nodes to the lamobo-r1 board

From: Florian Fainelli
Date: Sat Jun 25 2016 - 23:04:50 EST


Now that we have a proper binding for Ethernet switches hanging off
different buses, and a driver for the BCM53125 switch, add its Device
Tree as a child MDIO node, at MDIO address 30 (Broadcom pseudo-PHY
address) and describe the ports layout of the Lamobo R1 board.

This switch is hanging off the GMAC MDIO controller, not the
allwinner,sun4i-a10-mdio MDIO controller which is labeled "mdio"

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
Changes in v2:

- change the unit specifier to use hexadecimal
- name the GMAC MDIO controller label "mdio-gmac"
- specify board name in subject

Maxime,

You can find the B53 driver and its binding here:

https://git.kernel.org/cgit/linux/kernel/git/davem/net-next.git/commit/?id=23c731e830009a51a39a7a558179007235c84eb7

arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 +++++++++++++++++++++++++++++--
1 file changed, 57 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 5ee43d8bf174..99e71cca1da1 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
@@ -110,13 +110,67 @@
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_pins_rgmii_a>;
- phy = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";

- phy1: ethernet-phy@1 {
- reg = <1>;
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ mdio-gmac {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch: ethernet-switch@1e {
+ compatible = "brcm,bcm53125";
+ reg = <30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port0: port@0 {
+ reg = <0>;
+ label = "lan2";
+ };
+
+ port1: port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port2: port@2 {
+ reg = <2>;
+ label = "lan4";
+ };
+
+ port3: port@3 {
+ reg = <3>;
+ label = "wan";
+ };
+
+ port4: port@4 {
+ reg = <4>;
+ label = "lan1";
+ };
+
+ port8: port@8 {
+ reg = <8>;
+ label = "cpu";
+ ethernet = <&gmac>;
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+ };
+ };
};
};

--
2.7.4