Re: [RFC PATCH v2] ACPICA / Hardware: Fix old register check in acpi_hw_get_access_bit_width()

From: Boris Ostrovsky
Date: Tue May 31 2016 - 14:03:51 EST


On 05/31/2016 10:36 AM, Mike Marshall wrote:
> Hi Lv...
>
> I was dead in the water before this patch, qemu-kvm would crash
> right away, now everything seems to work great again, thanks! From
> my perspective this fixes the c3bc26d problem.
>
> Acked-by: Mike Marshall <hubcap@xxxxxxxxxxxx>
>
> -Mike
>
> On Tue, May 31, 2016 at 3:13 AM, Zheng, Lv <lv.zheng@xxxxxxxxx> wrote:
>> Hi, Boris and Mike
>>
>> Please help to validate if this version can also fix your issues.
>> After enumerating the possible cases, I realized that the address check might not be necessary.
>> But we need a max_bit_width check in this function to make it prepared for a future usage in acpi_read()/acpi_write().
>> Thanks in advance.

You can add
Tested-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>

although this still allows us to access bytes that we are not supposed to.

You may be able to calculate access width as something like

min (max_bit_width,
ACPI_ROUND_UP((ACPI_ROUND_DOWN(reg->bit_offset, 8) +
reg->bit_width),
8);

-boris


>> Best regards
>> -Lv
>>
>>> From: Zheng, Lv
>>> Subject: [RFC PATCH v2] ACPICA / Hardware: Fix old register check in
>>> acpi_hw_get_access_bit_width()
>>>
>>> The address check in acpi_hw_get_access_bit_width() should be byte
>>> width
>>> based, not bit width based. This patch fixes this mistake.
>>>
>>> For those who want to review acpi_hw_access_bit_width(), here is the
>>> concerns and the design details of the function:
>>>
>>> It is supposed that the GAS Address field should be aligned to the byte
>>> width indicated by the GAS AccessSize field. Similarly, for the old non
>>> GAS register, it is supposed that its Address should be aligned to its
>>> Length.
>>> For the "AccessSize = 0 (meaning ANY)" case, we try to return the
>>> maximum
>>> instruction width (64 for MMIO or 32 for PIO) or the user expected access
>>> bit width (64 for acpi_read()/acpi_write() or 32 for acpi_hw_read()/
>>> acpi_hw_write()) for futher operation and it is supposed that the GAS
>>> Address field should always be aligned to the maximum expected access
>>> bit
>>> width (otherwise it can't be ANY).
>>>
>>> The problem is in acpi_tb_init_generic_address(), where the non GAS
>>> register's Length is converted into the GAS BitWidth field, its Address is
>>> converted into the GAS Address field, and the GAS AccessSize field is left
>>> 0 but most of the register actually cannot be accessed using "ANY"
>>> accesses.
>>>
>>> As a conclusion, when AccessSize = 0 (ANY), the Address should either be
>>> aligned to the BitWidth (wrong conversion) or aligned to 32 (PIO) or 64
>>> (MMIO). Since BitWidth for the wrong conversion is 8,16,32, the Address
>>> of the real GAS should always be aligned to 8,16,32, the address alignment
>>> check is not necessary. But we in fact could enhance the check for a future
>>> case where max_bit_width could be 64 for a PIO access issued from
>>> acpi_read()/acpi_write().
>>>
>>> Fixes: b314a172ee96 ("ACPICA: Hardware: Add optimized access bit width
>>> support")
>>> Cc: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
>>> Cc: Mike Marshall <hubcap@xxxxxxxxxxxx>
>>> Suggested-by: Jan Beulich <jbeulich@xxxxxxxx>
>>> Signed-off-by: Lv Zheng <lv.zheng@xxxxxxxxx>
>>> ---
>>> drivers/acpi/acpica/hwregs.c | 16 +++++++---------
>>> 1 file changed, 7 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
>>> index 0f18dbc..0553c0b 100644
>>> --- a/drivers/acpi/acpica/hwregs.c
>>> +++ b/drivers/acpi/acpica/hwregs.c
>>> @@ -86,24 +86,22 @@ acpi_hw_get_access_bit_width(struct
>>> acpi_generic_address *reg, u8 max_bit_width)
>>> u64 address;
>>>
>>> if (!reg->access_width) {
>>> + if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
>>> + max_bit_width = 32;
>>> + }
>>> /*
>>> * Detect old register descriptors where only the bit_width
>>> field
>>> * makes senses. The target address is copied to handle
>>> possible
>>> * alignment issues.
>>> */
>>> ACPI_MOVE_64_TO_64(&address, &reg->address);
>>> - if (!reg->bit_offset && reg->bit_width &&
>>> + if (reg->bit_width < max_bit_width &&
>>> + !reg->bit_offset && reg->bit_width &&
>>> ACPI_IS_POWER_OF_TWO(reg->bit_width) &&
>>> - ACPI_IS_ALIGNED(reg->bit_width, 8) &&
>>> - ACPI_IS_ALIGNED(address, reg->bit_width)) {
>>> + ACPI_IS_ALIGNED(reg->bit_width, 8)) {
>>> return (reg->bit_width);
>>> - } else {
>>> - if (reg->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
>>> {
>>> - return (32);
>>> - } else {
>>> - return (max_bit_width);
>>> - }
>>> }
>>> + return (max_bit_width);
>>> } else {
>>> return (1 << (reg->access_width + 2));
>>> }
>>> --
>>> 1.7.10