[PATCH 4.5 68/87] serial: 8250_mid: use proper bar for DNV platform

From: Greg Kroah-Hartman
Date: Mon May 30 2016 - 17:05:49 EST


4.5-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>

commit 107e15fc1f8d6ef69eac5f175971252f76e82f0d upstream.

Unlike Intel Medfield and Tangier platforms DNV uses PCI BAR0 for IO compatible
resources and BAR1 for MMIO. We need latter in a way to support DMA. Introduce
an additional field in the internal structure and pass PCI BAR based on device
ID.

Reported-by: "Lai, Poey Seng" <poey.seng.lai@xxxxxxxxx>
Fixes: 6ede6dcd87aa ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/tty/serial/8250/8250_mid.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -14,6 +14,7 @@
#include <linux/pci.h>

#include <linux/dma/hsu.h>
+#include <linux/8250_pci.h>

#include "8250.h"

@@ -31,6 +32,7 @@
struct mid8250;

struct mid8250_board {
+ unsigned int flags;
unsigned long freq;
unsigned int base_baud;
int (*setup)(struct mid8250 *, struct uart_port *p);
@@ -106,12 +108,13 @@ static int dnv_setup(struct mid8250 *mid
{
struct hsu_dma_chip *chip = &mid->dma_chip;
struct pci_dev *pdev = to_pci_dev(p->dev);
+ unsigned int bar = FL_GET_BASE(mid->board->flags);
int ret;

chip->dev = &pdev->dev;
chip->irq = pdev->irq;
chip->regs = p->membase;
- chip->length = pci_resource_len(pdev, 0);
+ chip->length = pci_resource_len(pdev, bar);
chip->offset = DNV_DMA_CHAN_OFFSET;

/* Falling back to PIO mode if DMA probing fails */
@@ -217,6 +220,7 @@ static int mid8250_probe(struct pci_dev
{
struct uart_8250_port uart;
struct mid8250 *mid;
+ unsigned int bar;
int ret;

ret = pcim_enable_device(pdev);
@@ -230,6 +234,7 @@ static int mid8250_probe(struct pci_dev
return -ENOMEM;

mid->board = (struct mid8250_board *)id->driver_data;
+ bar = FL_GET_BASE(mid->board->flags);

memset(&uart, 0, sizeof(struct uart_8250_port));

@@ -242,8 +247,8 @@ static int mid8250_probe(struct pci_dev
uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT | UPF_FIXED_TYPE;
uart.port.set_termios = mid8250_set_termios;

- uart.port.mapbase = pci_resource_start(pdev, 0);
- uart.port.membase = pcim_iomap(pdev, 0, 0);
+ uart.port.mapbase = pci_resource_start(pdev, bar);
+ uart.port.membase = pcim_iomap(pdev, bar, 0);
if (!uart.port.membase)
return -ENOMEM;

@@ -282,18 +287,21 @@ static void mid8250_remove(struct pci_de
}

static const struct mid8250_board pnw_board = {
+ .flags = FL_BASE0,
.freq = 50000000,
.base_baud = 115200,
.setup = pnw_setup,
};

static const struct mid8250_board tng_board = {
+ .flags = FL_BASE0,
.freq = 38400000,
.base_baud = 1843200,
.setup = tng_setup,
};

static const struct mid8250_board dnv_board = {
+ .flags = FL_BASE1,
.freq = 133333333,
.base_baud = 115200,
.setup = dnv_setup,