[PATCH net] bnx2x: avoid leaking memory on bnx2x_init_one() failures

From: Vitaly Kuznetsov
Date: Mon May 30 2016 - 09:01:01 EST


bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we
fail later in bnx2x_init_one() we need to free this memory
with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory
leaks reported by kmemleak when a failure (unrelated) happens in
bnx2x_vfpf_acquire().

Signed-off-by: Vitaly Kuznetsov <vkuznets@xxxxxxxxxx>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 0a5b770..c5fe9158 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13941,14 +13941,14 @@ static int bnx2x_init_one(struct pci_dev *pdev,
bp->doorbells = bnx2x_vf_doorbells(bp);
rc = bnx2x_vf_pci_alloc(bp);
if (rc)
- goto init_one_exit;
+ goto init_one_freemem;
} else {
doorbell_size = BNX2X_L2_MAX_CID(bp) * (1 << BNX2X_DB_SHIFT);
if (doorbell_size > pci_resource_len(pdev, 2)) {
dev_err(&bp->pdev->dev,
"Cannot map doorbells, bar size too small, aborting\n");
rc = -ENOMEM;
- goto init_one_exit;
+ goto init_one_freemem;
}
bp->doorbells = ioremap_nocache(pci_resource_start(pdev, 2),
doorbell_size);
@@ -13957,19 +13957,19 @@ static int bnx2x_init_one(struct pci_dev *pdev,
dev_err(&bp->pdev->dev,
"Cannot map doorbell space, aborting\n");
rc = -ENOMEM;
- goto init_one_exit;
+ goto init_one_freemem;
}

if (IS_VF(bp)) {
rc = bnx2x_vfpf_acquire(bp, tx_count, rx_count);
if (rc)
- goto init_one_exit;
+ goto init_one_freemem;
}

/* Enable SRIOV if capability found in configuration space */
rc = bnx2x_iov_init_one(bp, int_mode, BNX2X_MAX_NUM_OF_VFS);
if (rc)
- goto init_one_exit;
+ goto init_one_freemem;

/* calc qm_cid_count */
bp->qm_cid_count = bnx2x_set_qm_cid_count(bp);
@@ -13988,7 +13988,7 @@ static int bnx2x_init_one(struct pci_dev *pdev,
rc = bnx2x_set_int_mode(bp);
if (rc) {
dev_err(&pdev->dev, "Cannot set interrupts\n");
- goto init_one_exit;
+ goto init_one_freemem;
}
BNX2X_DEV_INFO("set interrupts successfully\n");

@@ -13996,7 +13996,7 @@ static int bnx2x_init_one(struct pci_dev *pdev,
rc = register_netdev(dev);
if (rc) {
dev_err(&pdev->dev, "Cannot register net device\n");
- goto init_one_exit;
+ goto init_one_freemem;
}
BNX2X_DEV_INFO("device name after netdev register %s\n", dev->name);

@@ -14029,6 +14029,9 @@ static int bnx2x_init_one(struct pci_dev *pdev,

return 0;

+init_one_freemem:
+ bnx2x_free_mem_bp(bp);
+
init_one_exit:
bnx2x_disable_pcie_error_reporting(bp);

--
2.5.5