Re: [PATCH v2 3/7] iio: inv_mpu6050: Only toggle DATA_RDY_EN in inv_reset_fifo

From: Jonathan Cameron
Date: Sun May 29 2016 - 11:29:32 EST


On 18/05/16 16:00, Crestez Dan Leonard wrote:
> Signed-off-by: Crestez Dan Leonard <leonard.crestez@xxxxxxxxx>
Looks good to me.

Jonathan
> ---
> drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c | 13 ++++++++-----
> drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c | 3 ++-
> 2 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> index 8455af0..3fc0b71 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c
> @@ -41,7 +41,8 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
> struct inv_mpu6050_state *st = iio_priv(indio_dev);
>
> /* disable interrupt */
> - result = regmap_write(st->map, st->reg->int_enable, 0);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN, 0);
> if (result) {
> dev_err(regmap_get_device(st->map), "int_enable failed %d\n",
> result);
> @@ -68,8 +69,9 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
> /* enable interrupt */
> if (st->chip_config.accl_fifo_enable ||
> st->chip_config.gyro_fifo_enable) {
> - result = regmap_write(st->map, st->reg->int_enable,
> - INV_MPU6050_BIT_DATA_RDY_EN);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN,
> + INV_MPU6050_BIT_DATA_RDY_EN);
> if (result)
> return result;
> }
> @@ -92,8 +94,9 @@ int inv_reset_fifo(struct iio_dev *indio_dev)
>
> reset_fifo_fail:
> dev_err(regmap_get_device(st->map), "reset fifo failed %d\n", result);
> - result = regmap_write(st->map, st->reg->int_enable,
> - INV_MPU6050_BIT_DATA_RDY_EN);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN,
> + INV_MPU6050_BIT_DATA_RDY_EN);
>
> return result;
> }
> diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> index e8818d4..1a6bad3 100644
> --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
> @@ -69,7 +69,8 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
> if (result)
> return result;
>
> - result = regmap_write(st->map, st->reg->int_enable, 0);
> + result = regmap_update_bits(st->map, st->reg->int_enable,
> + INV_MPU6050_BIT_DATA_RDY_EN, 0);
> if (result)
> return result;
>
>