Re: [PATCH v3 5/5] usb: dwc3: rockchip: add devicetree bindings documentation

From: Sergei Shtylyov
Date: Fri May 27 2016 - 07:54:25 EST


Hello.

On 5/27/2016 2:31 PM, William Wu wrote:

This patch documents the device tree documentation required for

Documents the documentation? :-)

Rockchip USB3.0 core wrapper consist of USB3.0 IP from Synopsys.

Consisting?

It could operate in device mode (SS, HS, FS) and host
mode (SS, HS, FS, LS).

Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
---
Changes in v3:
- add dwc3 address (Felipe)

Changes in v2:
- add rockchip,dwc3.txt to Documentation/devicetree/bindings/ (Felipe, Brian)


.../devicetree/bindings/usb/rockchip,dwc3.txt | 45 ++++++++++++++++++++++
1 file changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/rockchip,dwc3.txt

diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
new file mode 100644
index 0000000..0bb52fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt
@@ -0,0 +1,45 @@
+Rockchip SuperSpeed DWC3 USB SoC controller
+
+Required properties:
+- compatible: should contain "rockchip,dwc3"
+- clocks: A list of phandle + clock-specifier pairs for the
+ clocks listed in clock-names
+- clock-names: Should contain the following:
+ "clk_usb3otg0_ref" Controller reference clk
+ "clk_usb3otg0_suspend"Controller suspend clk, can use 24 MHz or 32 KHz
+ "aclk_usb3" Master/Core clock, have to be >= 62.5 MHz for SS operation
+
+
+Optional clocks:
+ "aclk_usb3otg0" Aclk for specific usb controller clock.
+ "aclk_usb3_rksoc_axi_perf" USB AXI perf clock. Not present on all platforms.
+ "aclk_usb3_grf" USB grf clock. Not present on all platforms.
+
+Required child node:
+A child node must exist to represent the core DWC3 IP block. The name of
+the node is not important. The content of the node is defined in dwc3.txt.
+
+Phy documentation is provided in the following places:

PHY.

[...]

MBR, Sergei