Re: [PATCH v3 12/12] sh: add device tree source for J2 FPGA on Mimas v2 board

From: Mark Rutland
Date: Wed May 25 2016 - 06:34:16 EST


On Wed, May 25, 2016 at 05:43:03AM +0000, Rich Felker wrote:
> Signed-off-by: Rich Felker <dalias@xxxxxxxx>
> ---
> arch/sh/boot/dts/j2_mimas_v2.dts | 87 ++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 87 insertions(+)
> create mode 100755 arch/sh/boot/dts/j2_mimas_v2.dts
>
> diff --git a/arch/sh/boot/dts/j2_mimas_v2.dts b/arch/sh/boot/dts/j2_mimas_v2.dts
> new file mode 100755
> index 0000000..4a66cda
> --- /dev/null
> +++ b/arch/sh/boot/dts/j2_mimas_v2.dts
> @@ -0,0 +1,87 @@
> +/dts-v1/;
> +
> +/ {
> + compatible = "jcore,j2-soc";
> + model = "J2 FPGA SoC on Mimas v2 board";
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + interrupt-parent = <&aic>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + device_type = "cpu";
> + compatible = "jcore,j2";
> + reg = < 0 >;
> + clock-frequency = < 50000000 >;

Nit: please remove the spacing around the '<' and '>' here. If nothing
else, it's inconsistent with the rest of this file.

> + };
> + };
> +
> + memory@10000000 {
> + device_type = "memory";
> + reg = < 0x10000000 0x4000000 >;
> + };

Likewise.

> +
> + chosen {
> + stdout-path = "/soc@abcd0000/serial@100";
> + };

Please use a label for the serial node, have an alias, and describe the
pre-configured rate per the stdout-path binding, e.g.


aliases {
serial0 = &uart0;
};

chosen {
stdout-path = "serial0:19200n8";
};

...

soc@abcd0000 {
...
uart0: serial@100 {
...
};
};

Note that using stdout-path is preferable to current-speed or other
UART-specific bindings.

Thanks,
Mark.

> +
> + soc@abcd0000 {
> + compatible = "simple-bus";
> + ranges = <0 0xabcd0000 0x100000>;
> +
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + aic: interrupt-controller@200 {
> + compatible = "jcore,aic1";
> + reg = < 0x200 0x10 >;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> +
> + cache-controller@c0 {
> + compatible = "jcore,cache";
> + reg = < 0xc0 4 >;
> + };
> +
> + timer@200 {
> + compatible = "jcore,pit";
> + reg = < 0x200 0x30 >;
> + interrupts = < 0x48 >;
> + };
> +
> + spi@40 {
> + compatible = "jcore,spi2";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + spi-max-frequency = <12500000>;
> +
> + reg = < 0x40 0x8 >;
> +
> + sdcard@0 {
> + compatible = "mmc-spi-slot";
> + reg = <0>;
> + spi-max-frequency = <12500000>;
> + voltage-ranges = <3200 3400>;
> + mode = <0>;
> + };
> + };
> +
> + serial@100 {
> + clock-frequency = <125000000>;
> + compatible = "xlnx,xps-uartlite-1.00.a";
> + current-speed = <19200>;
> + device_type = "serial";
> + interrupts = < 0x12 >;
> + port-number = <0>;
> + reg = < 0x100 0x10 >;
> + };
> + };
> +};
> --
> 2.8.1
>