[PATCH v3 02/12] of: add J-Core cpu bindings

From: Rich Felker
Date: Wed May 25 2016 - 01:45:54 EST


Signed-off-by: Rich Felker <dalias@xxxxxxxx>
---
Documentation/devicetree/bindings/jcore/cpus.txt | 92 ++++++++++++++++++++++++
1 file changed, 92 insertions(+)
create mode 100644 Documentation/devicetree/bindings/jcore/cpus.txt

diff --git a/Documentation/devicetree/bindings/jcore/cpus.txt b/Documentation/devicetree/bindings/jcore/cpus.txt
new file mode 100644
index 0000000..9d77ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/jcore/cpus.txt
@@ -0,0 +1,92 @@
+===================
+J-Core cpu bindings
+===================
+
+The J-Core processors are open source CPU cores that can be built as FPGA
+soft cores or ASICs. The device tree is also responsible for describing the
+cache controls and, for SMP configurations, all details of the SMP method,
+as documented below.
+
+
+---------------------
+Top-level "cpus" node
+---------------------
+
+Required properties:
+
+- #address-cells: Must be 1.
+
+- #size-cells: Must be 0.
+
+Optional properties:
+
+- enable-method: Required only for SMP systems. If present, must be
+ "jcore,spin-table".
+
+
+--------------------
+Individual cpu nodes
+--------------------
+
+Required properties:
+
+- device_type: Must be "cpu".
+
+- compatible: Must be "jcore,j2".
+
+- reg: Must be 0 on uniprocessor systems, or the sequential, zero-based
+ hardware cpu id on SMP systems.
+
+Optional properties:
+
+- clock-frequency: Clock frequency of the cpu in Hz.
+
+- cpu-release-addr: Necessary only for secondary processors on SMP systems
+ using the "jcore,spin-table" enable method. If present, must consist of
+ two cells containing physical addresses. The first cell contains an
+ address which, when written, unblocks the secondary cpu. The second cell
+ contains an address from which the cpu will read its initial program
+ counter when unblocked.
+
+
+---------------------
+Cache controller node
+---------------------
+
+Required properties:
+
+- compatible: Must be "jcore,cache".
+
+- reg: A memory range for the cache controller registers.
+
+
+--------
+IPI node
+--------
+
+Device trees for SMP systems must have an IPI node representing the mechanism
+used for inter-processor interrupt generation.
+
+Required properties:
+
+- compatible: Must be "jcore,ipi-controller".
+
+- reg: A memory range used to IPI generation.
+
+- interrupts: An irq on which IPI will be received.
+
+
+----------
+CPUID node
+----------
+
+Device trees for SMP systems must have a CPUID node representing the mechanism
+used to identify the current processor on which execution is taking place.
+
+Required properties:
+
+- compatible: Must be "jcore,cpuid-mmio".
+
+- reg: A memory range containing a single 32-bit mmio register which produces
+ the current cpu id (matching the "reg" property of the cpu performing the
+ read) when read.
--
2.8.1