[PATCH v3 03/12] of: add J-Core interrupt controller bindings

[Rich Felker]

Signed-off-by: Rich Felker <dalias@xxxxxxxx>
---
 .../bindings/interrupt-controller/jcore,aic.txt    | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
new file mode 100644
index 0000000..5dc99b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/jcore,aic.txt
@@ -0,0 +1,29 @@
+J-Core Advanced Interrupt Controller
+
+Required properties:
+
+- compatible : Should be "jcore,aic1" for the (obsolete) first-generation aic
+  with 8 interrupt lines with programmable priorities, or "jcore,aic2" for
+  the "aic2" core with 64 interrupts.
+
+- reg : Memory region for configuration.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+Optional properties:
+
+- cpu-offset : For SMP, the offset to the per-cpu memory region for
+  configuration, to be scaled by the cpu number.
+
+
+Example:
+
+aic: interrupt-controller@200 {
+	compatible = "jcore,aic2";
+	reg = < 0x200 0x10 >;
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
-- 
2.8.1