[PATCH 11/21] X86_64, UV: Move scir info to the per cpu info struct

From: Mike Travis
Date: Thu Apr 28 2016 - 19:10:42 EST


Change the references to the SCIR fields to the new per cpu info structs.

Signed-off-by: Mike Travis <travis@xxxxxxx>
Reviewed-by: Dimitri Sivanich <sivanich@xxxxxxx>
Tested-by: John Estabrook <estabrook@xxxxxxx>
Tested-by: Gary Kroening <gfk@xxxxxxx>
Tested-by: Nathan Zimmer <nzimmer@xxxxxxx>
---
arch/x86/include/asm/uv/uv_hub.h | 17 ++++++++++-------
arch/x86/kernel/apic/x2apic_uv_x.c | 18 +++++++++---------
2 files changed, 19 insertions(+), 16 deletions(-)

--- linux.orig/arch/x86/include/asm/uv/uv_hub.h
+++ linux/arch/x86/include/asm/uv/uv_hub.h
@@ -127,6 +127,7 @@
*/
#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_BLADES * 2)

+/* System Controller Interface Reg info */
struct uv_scir_s {
struct timer_list timer;
unsigned long offset;
@@ -161,7 +162,6 @@ struct uv_hub_info_s {
unsigned char blade_processor_id;
unsigned char m_val;
unsigned char n_val;
- struct uv_scir_s scir;
};

DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
@@ -179,6 +179,9 @@ DECLARE_PER_CPU(struct uv_cpu_info_s, __
#define uv_cpu_info this_cpu_ptr(&__uv_cpu_info)
#define uv_cpu_info_per(cpu) (&per_cpu(__uv_cpu_info, cpu))

+#define uv_scir_info (&uv_cpu_info->scir)
+#define uv_cpu_scir_info(cpu) (&uv_cpu_info_per(cpu)->scir)
+
/*
* HUB revision ranges for each UV HUB architecture.
* This is a software convention - NOT the hardware revision numbers in
@@ -679,9 +682,9 @@ DECLARE_PER_CPU(struct uv_cpu_nmi_s, uv_
/* Update SCIR state */
static inline void uv_set_scir_bits(unsigned char value)
{
- if (uv_hub_info->scir.state != value) {
- uv_hub_info->scir.state = value;
- uv_write_local_mmr8(uv_hub_info->scir.offset, value);
+ if (uv_scir_info->state != value) {
+ uv_scir_info->state = value;
+ uv_write_local_mmr8(uv_scir_info->offset, value);
}
}

@@ -692,10 +695,10 @@ static inline unsigned long uv_scir_offs

static inline void uv_set_cpu_scir_bits(int cpu, unsigned char value)
{
- if (uv_cpu_hub_info(cpu)->scir.state != value) {
+ if (uv_cpu_scir_info(cpu)->state != value) {
uv_write_global_mmr8(uv_cpu_to_pnode(cpu),
- uv_cpu_hub_info(cpu)->scir.offset, value);
- uv_cpu_hub_info(cpu)->scir.state = value;
+ uv_cpu_scir_info(cpu)->offset, value);
+ uv_cpu_scir_info(cpu)->state = value;
}
}

--- linux.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -776,8 +776,8 @@ static __init void uv_rtc_init(void)
*/
static void uv_heartbeat(unsigned long ignored)
{
- struct timer_list *timer = &uv_hub_info->scir.timer;
- unsigned char bits = uv_hub_info->scir.state;
+ struct timer_list *timer = &uv_scir_info->timer;
+ unsigned char bits = uv_scir_info->state;

/* flip heartbeat bit */
bits ^= SCIR_CPU_HEARTBEAT;
@@ -797,14 +797,14 @@ static void uv_heartbeat(unsigned long i

static void uv_heartbeat_enable(int cpu)
{
- while (!uv_cpu_hub_info(cpu)->scir.enabled) {
- struct timer_list *timer = &uv_cpu_hub_info(cpu)->scir.timer;
+ while (!uv_cpu_scir_info(cpu)->enabled) {
+ struct timer_list *timer = &uv_cpu_scir_info(cpu)->timer;

uv_set_cpu_scir_bits(cpu, SCIR_CPU_HEARTBEAT|SCIR_CPU_ACTIVITY);
setup_timer(timer, uv_heartbeat, cpu);
timer->expires = jiffies + SCIR_CPU_HB_INTERVAL;
add_timer_on(timer, cpu);
- uv_cpu_hub_info(cpu)->scir.enabled = 1;
+ uv_cpu_scir_info(cpu)->enabled = 1;

/* also ensure that boot cpu is enabled */
cpu = 0;
@@ -814,9 +814,9 @@ static void uv_heartbeat_enable(int cpu)
#ifdef CONFIG_HOTPLUG_CPU
static void uv_heartbeat_disable(int cpu)
{
- if (uv_cpu_hub_info(cpu)->scir.enabled) {
- uv_cpu_hub_info(cpu)->scir.enabled = 0;
- del_timer(&uv_cpu_hub_info(cpu)->scir.timer);
+ if (uv_cpu_scir_info(cpu)->enabled) {
+ uv_cpu_scir_info(cpu)->enabled = 0;
+ del_timer(&uv_cpu_scir_info(cpu)->timer);
}
uv_set_cpu_scir_bits(cpu, 0xff);
}
@@ -1075,13 +1075,13 @@ void __init uv_system_init(void)

uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->pnode = pnode;
- uv_cpu_hub_info(cpu)->scir.offset = uv_scir_offset(apicid);
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_node_to_blade[nodeid] = blade;
uv_cpu_to_blade[cpu] = blade;

/* Initialize per cpu info list */
uv_cpu_info_per(cpu)->p_uv_hub_info = uv_cpu_hub_info(cpu);
+ uv_cpu_info_per(cpu)->scir.offset = uv_scir_offset(apicid);
}

/* Add blade/pnode info for nodes without cpus */

--