Re: [PATCH 2/3] ARM: DRA7x: dts: Fix the 32kHz clock calculation

[Tero Kristo]

On 27/04/16 17:06, J.D. Schroeder wrote:
> On 04/27/2016 06:40 AM, Tero Kristo wrote:
> > On 26/04/16 20:54, J.D. Schroeder wrote:
> > > This commit fixes the 32kHz clock (sys_32k_ck) calculation to be
> > > correctly based on the SYS_CLK1 (sys_clkin1) frequency. Based on the
> > > TRM CTRL_CORE_BOOTSTRAP[9:8] SPEEDSELECT, set by the SYSBOOT[9:8]
> > > board jumpers according to the SYS_CLK1 frequency, the frequency of
> > > the 32kHz FUNC_32K_CLK is set to SYS_CLK1/610. The following
> > > sys_32k_ck frequencies get used for different SYS_CLK1 frequencies:
> > >           0b00: Unknown  -> 32768 Hz crystal from CLKIN_32K pin
> > >           0b01: 20   MHz -> 32787 Hz clock (SYS_CLK1/610)
> > >           0b10: 27   MHz -> 44262 Hz clock (SYS_CLK1/610)
> > >           0b11: 19.2 MHz -> 31475 Hz clock (SYS_CLK1/610)
> >
> > A patch doing the same thing is already in mainline, see:
> >
> > commit eea08802f586acd6aef377d1b4a541821013cc0b
> > Author: Keerthy <j-keerthy@xxxxxx>
> > Date:   Mon Apr 4 11:07:15 2016 +0530
> >
> >      ARM: dts: dra7: Correct clock tree for sys_32k_ck
> >
> > So, this one can be ignored.
>
> My change had no issue when applying to the tip of master and I'm not seeing
> that SHA1 in mainline. Are you saying it is in another repo ready to be sent
> to mainline for the next release cycle?

The patch is merged already in 4.6-rc3.

Which repo / version are you using as baseline?

-Tero