Re: [PATCH 12/41] Documentation: dt: input: fix spelling mistakes

From: Rob Herring
Date: Mon Apr 25 2016 - 09:50:08 EST


On Mon, Apr 25, 2016 at 01:24:09AM +0100, Eric Engestrom wrote:
> Signed-off-by: Eric Engestrom <eric@xxxxxxxxxxxx>

Applied, thanks.

Rob

> ---
> Documentation/devicetree/bindings/input/ads7846.txt | 2 +-
> Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/ads7846.txt b/Documentation/devicetree/bindings/input/ads7846.txt
> index c6cfe2e..9fc47b0 100644
> --- a/Documentation/devicetree/bindings/input/ads7846.txt
> +++ b/Documentation/devicetree/bindings/input/ads7846.txt
> @@ -29,7 +29,7 @@ Optional properties:
> ti,vref-delay-usecs vref supply delay in usecs, 0 for
> external vref (u16).
> ti,vref-mv The VREF voltage, in millivolts (u16).
> - Set to 0 to use internal refernce
> + Set to 0 to use internal references
> (ADS7846).
> ti,keep-vref-on set to keep vref on for differential
> measurements as well
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> index cdf05f9..abfcab3 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/fsl-mx25-tcq.txt
> @@ -15,7 +15,7 @@ Optional properties:
> - fsl,pen-debounce-ns: Pen debounce time in nanoseconds.
> - fsl,pen-threshold: Pen-down threshold for the touchscreen. This is a value
> between 1 and 4096. It is the ratio between the internal reference voltage
> - and the measured voltage after the plate was precharged. Resistence between
> + and the measured voltage after the plate was precharged. Resistance between
> plates and therefore the voltage decreases with pressure so that a smaller
> value is equivalent to a higher pressure.
> - fsl,settling-time-ns: Settling time in nanoseconds. The settling time is before
> --
> 2.8.0
>