[PATCH RFC v1 12/12] Cyclic/rtc documentation

From: Bill Huey (hui)
Date: Thu Apr 14 2016 - 02:49:13 EST


Initial attempt at documentation with a test program

Signed-off-by: Bill Huey (hui) <bill.huey@xxxxxxxxx>
---
Documentation/scheduler/sched-cyclic-rtc.txt | 468 +++++++++++++++++++++++++++
1 file changed, 468 insertions(+)
create mode 100644 Documentation/scheduler/sched-cyclic-rtc.txt

diff --git a/Documentation/scheduler/sched-cyclic-rtc.txt b/Documentation/scheduler/sched-cyclic-rtc.txt
new file mode 100644
index 0000000..4d22381
--- /dev/null
+++ b/Documentation/scheduler/sched-cyclic-rtc.txt
@@ -0,0 +1,468 @@
+[in progress]
+
+"Work Conserving"
+
+When a task is active and calls read(), it will block/yield depending on
+is requested from the cyclic scheduler. A RT_OV_YIELD call to ioctl()
+specifies the behavior for the calling thread.
+
+In the case where read() is called before the time slice is over, it will
+allow other tasks to run with the leftover time.
+
+"Overrun Reporting/Apps"
+
+Calls to read() will return the overrun count and zero the counter. This
+can be used to adjust the execution time of the thread so that it can run
+within that slot so that thread can meet some deadline constraint.
+
+[no decision has been made to return a more meaningful set of numbers as
+you can just get time stamps and do the math in userspace but it could
+be changed to do so]
+
+The behavior of the read() depends on whether it has been admitted or not
+via an ioctl() using RTC_OV_ADMIT. If it is then it will return the overrun
+count. If this is not admitted then it returns value corresponding to the
+default read() behavior for rtc.
+
+See the sample test sources for details.
+
+Using a video game as an example, having a rendering engine overrunning its
+slot driving by a vertical retrace interrupt can cause visual skipping and
+hurt interactivity. Adapting the computation from the read() result can
+allow for the frame buffer swap at the frame interrupt. If read() reports
+and it can simplify calculations and adapt to fit within that slot.
+It would then allow the program to respond to events (touches, buttons)
+minimizing the possibility of perceived pauses.
+
+The slot allocation scheme for the video game must have some inherit
+definition of interactivity. That determines appropriate slot allocation
+amognst a mixture of soft/hard real-time. A general policy must be created
+for the system, and all programs, to meet a real-time criteria.
+
+"Admittance"
+
+Admittance of a task is done through a ioctl() call using RTC_OV_ADMIT.
+This passes 64 bit wide bitmap that maps onto a entries in the slot map.
+
+(slot map of two threads)
+execution direction ->
+
+1000 1000 1000 1000...
+0100 0100 0100 0100...
+
+(bit pattern of two threads)
+0001 0001 0001 0001...
+0010 0010 0010 0010...
+
+(hex)
+0x1111
+0x2222
+
+The slot map is an array of 64 entries of threads. An index is increment
+through determine what the next active thread-slot will be. The end of the
+index set in /proc/rt_overrun_proc
+
+"Slot/slice activation"
+
+Move the task to the front of the SCHED_FIFO list when active, the tail when
+inactive.
+
+"RTC Infrastructure and Interrupt Routing"
+
+The cyclic scheduler is driven by the update interrupt in the RTC
+infrastructure but can be rerouted to any periodic interrupt source.
+
+One of those applications could be when interrupts from a display refresh
+happen or some interval where an external controller such as a drum pad,
+touch event or whatever.
+
+"Embedded Environments"
+
+This is single run queue only and targeting embedded scenarios where not all
+cores are guaranteed to be available. Older Qualcomm MSM kernels have a very
+aggressive cpu hotplug as a means of fully powering off cores. The only
+guaranteed CPU to run is CPU 0.
+
+"Project History"
+
+This was originally created when I was at HP/Palm to solve issues related
+to touch event handling and lag working with the real-time media subsystem.
+The typical workaround used to prevent skipping is to use large buffers to
+prevent data underruns. The programs running at SCHED_FIFO which can
+starve the system from handling external events in a timely manner like
+buttons or touch events. The lack of a globally defined policy of how to
+use real-time resources can causes long pauses between handling touch
+events and other kinds of implicit deadline misses.
+
+By choosing some kind of slot execution pattern, it was hoped that it that
+can be controlled globally across the system so that some basic interactive
+guarantees can be met. Whether the tasks be some combination of soft or
+hard real-time, a mechanism like this can help guide how SCHED_FIFO tasks
+are run versus letting SCHED_FIFO tasks run wildly.
+
+"Future work"
+
+Possible integration with the deadline scheduler. Power management
+awareness, CPU clock governor. Turning off the scheduler tick when there
+are no runnable tasks, other things...
+
+"Power management"
+
+Governor awareness...
+
+[more]
+
+----------------------------
+
+/*
+ * Based on the:
+ *
+ * Real Time Clock Driver Test/Example Program
+ * by Copyright (C) 1996, Paul Gortmaker.
+ *
+ * Simplification and multi-threading support for interrupt event testing
+ * by Bill Huey at <bill.huey@xxxxxxxxx>
+ *
+ * Released under the GNU General Public License, version 2,
+ * included herein by reference.
+ */
+
+#include <stdio.h>
+#include <linux/rtc.h>
+#include <sys/ioctl.h>
+#include <sys/time.h>
+#include <sys/types.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <pthread.h>
+#include <linux/types.h>
+#include <sys/mman.h>
+#include <sched.h>
+#include <errno.h>
+
+/*
+ * This expects the new RTC class driver framework, working with
+ * clocks that will often not be clones of what the PC-AT had.
+ * Use the command line to specify another RTC if you need one.
+ */
+static const char default_rtc[] = "/dev/rtc0";
+
+#define RTC_OV_ADMIT _IOW('p', 0x15, unsigned long)
+#define RTC_OV_REPLEN _IOW('p', 0x16, unsigned long)
+#define RTC_OV_YIELD _IOW('p', 0x17, unsigned long)
+
+//#if 0
+#define THREADS (3)
+#define handle_error_en(en, msg) \
+ do { errno = en; perror(msg); exit(EXIT_FAILURE); } while (0)
+
+#define OBJ (THREADS + 1)
+
+//#define LARGE (1000 * 1000)
+
+pthread_mutex_t mutex[OBJ];
+pthread_cond_t condvar[OBJ];
+
+pthread_mutex_t start_mutex = PTHREAD_MUTEX_INITIALIZER;
+pthread_cond_t start_condvar = PTHREAD_COND_INITIALIZER;
+int start[OBJ];
+
+pthread_t threads[OBJ];
+volatile int die = 0;
+int fd;
+
+#define ioctl_enotty_err(a, b, c, label, ret) \
+ retval = ioctl(fd, a, ret); \
+ if (retval == -1) { \
+ if (errno == ENOTTY) { \
+ fprintf(stderr, b); \
+ goto label; \
+ } \
+ perror(c); \
+ exit(errno); \
+ }
+
+#define ioctl_err(a, b, c) \
+ retval = ioctl(fd, a, c); \
+ if (retval == -1) { \
+ perror(b); \
+ exit(errno); \
+ }
+
+#define read_err(a) \
+ retval = read(fd, &data, sizeof(unsigned long)); \
+ if (retval == -1) { \
+ perror("read"); \
+ exit(errno); \
+ }
+
+void init_pthreads(void)
+{
+ int i;
+
+ for (i = 0; i < OBJ; ++i) {
+ start[i] = 1;
+ pthread_mutex_init(&mutex[i], NULL);
+ pthread_cond_init(&condvar[i], NULL);
+ }
+}
+
+/* Just loop and exit */
+void *thread(void *threadid)
+{
+ long tid = (unsigned long)threadid;
+ pthread_t self = pthread_self();
+ unsigned int i,j;
+ pid_t pid;
+ struct sched_param param;
+ int retval;
+ __aligned_u64 slots = 0;
+ unsigned long data;
+
+ fprintf(stderr, "\tthread id = %ld\n", tid);
+ param.sched_priority = sched_get_priority_min(SCHED_RR);
+ if (sched_setscheduler( 0, SCHED_RR, &param) == -1)
+ perror("sched_setscheduler failed\n");
+
+ pid = getpid();
+
+ if (start) {
+ start[tid] = 0;
+ pthread_mutex_lock(&start_mutex);
+ pthread_cond_signal(&start_condvar);
+ pthread_mutex_unlock(&start_mutex);
+ }
+
+ /* admit the task before doing yields */
+// fprintf(stderr, "\n");
+ for (i = 0; i < 64; ++i) {
+ if (((tid + i) % THREADS) == 0) {
+// fprintf(stderr, "%d\n", i);
+ slots |= ((long long unsigned) 1 << i);
+ }
+ }
+
+ fprintf(stderr, "slots = 0x%016llx\n", slots);
+ ioctl_err(RTC_OV_ADMIT, "RTC_OV_ADMIT ioctl", &slots);
+
+// slots = 1; /* set yield instead of block */
+// ioctl_err(RTC_OV_YIELD, "RTC_OV_YIELD ioctl", &slots);
+
+ while (!die)
+ ;
+
+ read_err();
+ fprintf(stderr, "tid %ld, 0x%04lx\n", tid, data);
+
+#if 0
+ ioctl_enotty_err(RTC_IRQP_SET,
+ "\n...Periodic IRQ rate is fixed\n",
+ "RTC_IRQP_SET ioctl",
+ done, (unsigned long ) slots);
+
+ ioctl_err(RTC_PIE_ON, "RTC_PIE_ON ioctl", 0);
+
+ while (!die)
+ ;
+
+ ioctl_err(RTC_PIE_OFF, "RTC_PIE_OFF ioctl", 0);
+#endif
+ /* body */
+
+ fprintf(stderr, "\tthread exited running SCHED_RR = %ld\n", tid);
+ pthread_exit(NULL);
+}
+
+void thread_spawn(int val)
+{
+ int result, retval;
+ long tid;
+ int i;
+ pthread_attr_t threads_attr[OBJ];
+ cpu_set_t cpuset;
+
+ struct sched_param schedparam;
+
+ schedparam.sched_priority = 3;
+
+ init_pthreads();
+
+ tid = 0;
+ while(tid < THREADS) {
+ fprintf(stderr, "\ncreated thread %ld\n", tid);
+ pthread_attr_init(&threads_attr[tid]);
+ pthread_attr_setinheritsched(&threads_attr[tid], PTHREAD_EXPLICIT_SCHED);
+ pthread_attr_setschedpolicy(&threads_attr[tid], SCHED_RR);
+ pthread_attr_setschedparam(&threads_attr[tid], &schedparam);
+ pthread_attr_destroy(&threads_attr[tid]);
+
+ pthread_mutex_lock(&start_mutex);
+ result = pthread_create(&threads[tid], &threads_attr[tid], thread, (void *)tid);
+ pthread_cond_wait(&start_condvar, &start_mutex);
+ pthread_mutex_unlock(&start_mutex);
+
+ if (result != 0)
+ handle_error_en(result, "pthread_create");
+ ++tid;
+ }
+
+ ioctl_err(RTC_PIE_ON, "RTC_PIE_ON ioctl", 0);
+
+ sleep(3);
+
+// 10/val; // deliberate divide by zero
+
+ sleep(1);
+ die = 1;
+
+ for (i = 0; i < THREADS; i++)
+ pthread_join(threads[i], NULL);
+
+ ioctl_err(RTC_PIE_OFF, "RTC_PIE_OFF ioctl", 0);
+
+ fprintf(stderr, "pthread done\n");
+}
+//#endif
+
+int main(int argc, char **argv)
+{
+ int i,j,k,
+ blocking,
+ delay,
+ retval, irqcount = 0;
+ unsigned long data;
+ __aligned_u64 slots;
+ struct rtc_time rtc_tm;
+ const char *rtc = default_rtc;
+ struct timeval start, end, diff;
+
+ struct sched_param param;
+ pid_t pid = getpid();
+
+ /* testing thread should be SCHED_FIFO or RR */
+ param.sched_priority = sched_get_priority_min(SCHED_RR);
+
+ if (sched_setscheduler(pid, SCHED_RR, &param) == -1)
+
+ perror("sched_setscheduler failed\n");
+
+ switch (argc) {
+ case 2:
+ rtc = argv[1];
+ /* FALLTHROUGH */
+ case 1:
+ break;
+ default:
+ fprintf(stderr, "usage: rtctest [rtcdev]\n");
+ return 1;
+ }
+
+ fd = open(rtc, O_RDONLY);
+ if (fd == -1) {
+ perror(rtc);
+ exit(errno);
+ }
+
+ fprintf(stderr, "\n\t\t\tRTC Driver Test Example.\n\n");
+
+ /* Admit this task, enable tick tracking and set the slots */
+// slots = 0xFFFFffffFFFFffff;
+ slots = 0x3333333333333333;
+ ioctl_err(RTC_OV_ADMIT, "RTC_OV_ADMIT ioctl", &slots);
+
+#if 0
+#endif
+test_PIE:
+ /* Read periodic IRQ rate */
+ ioctl_enotty_err(RTC_IRQP_READ,
+ "\nNo periodic IRQ support\n",
+ "RTC_IRQP_READ ioctl",
+ done, &slots);
+
+ fprintf(stderr, "\nPeriodic IRQ rate is %ldHz.\n", (unsigned long) slots);
+
+ fprintf(stderr, "Counting 20 interrupts at:");
+ fflush(stderr);
+
+ /* The frequencies 128Hz, 256Hz, ... 8192Hz are only allowed for root. */
+ for (slots=2; slots<=64; slots*=2) {
+ /* not all RTCs can change their periodic IRQ rate */
+ ioctl_enotty_err(RTC_IRQP_SET,
+ "\n...Periodic IRQ rate is fixed\n",
+ "RTC_IRQP_SET ioctl",
+ done, (unsigned long ) slots);
+
+ fprintf(stderr, "\n%ldHz:\t", (unsigned long ) slots);
+ fflush(stderr);
+
+ /* Enable periodic interrupts */
+ ioctl_err(RTC_PIE_ON, "RTC_PIE_ON ioctl", 0);
+
+// blocking = 0; delay = 0;
+ blocking = 0; delay = 1;
+// blocking = 1; delay = 0;
+// blocking = 1; delay = 1;
+ for (i=1; i<6; i++) {
+
+#define LARGE 5000
+#define LARGE2 50000
+#define work() \
+ \
+ /* This blocks */ \
+ if (blocking) { \
+ if (delay) \
+ fprintf(stderr, " ignoring delay "); \
+ \
+ gettimeofday(&start, NULL); \
+ fprintf(stderr, " "); \
+ read_err() \
+ } else { \
+ /* delay for testing yield only */ \
+ if (delay) { \
+ fprintf(stderr, "."); \
+ for(j = LARGE; j > 0; --j) \
+ for(k = LARGE2; k > 0; --k) \
+ ; \
+ } else \
+ fprintf(stderr, "`"); \
+ \
+ /* really a yield */ \
+ read_err() \
+ /* fake diff values on a yield */ \
+ gettimeofday(&start, NULL); \
+ } \
+ \
+ gettimeofday(&end, NULL); \
+ \
+ timersub(&end, &start, &diff); \
+ if (!blocking && (diff.tv_sec > 0 || \
+ diff.tv_usec > ((1000000L / slots) * 1.10))) { \
+ fprintf(stderr, \
+ "\nPIE delta error: %ld.%06ld should be close to 0.%06ld\n", \
+ diff.tv_sec, diff.tv_usec, \
+ (1000000L / (unsigned long) slots)); \
+ fflush(stdout); \
+ exit(-1); \
+ } \
+ \
+ fprintf(stderr, "%d 0x%04lx,", i, data); \
+ fflush(stderr); \
+ irqcount++;
+
+ work()
+ }
+ /* Disable periodic interrupts */
+ ioctl_err(RTC_PIE_OFF, "RTC_PIE_OFF ioctl", 0);
+ }
+
+done:
+ fprintf(stderr, "\n\n\t\t\t *** Test complete ***\n");
+
+ thread_spawn(0);
+
+ close(fd);
+
+ return 0;
+}
--
2.5.0