[PATCH 7/9] mtd: fsl-quadspi: Solve Micron Spansion flash command conflict

From: Yunhui Cui
Date: Thu Apr 14 2016 - 00:00:40 EST


From: Yunhui Cui <yunhui.cui@xxxxxxx>

Add some lut_tables to support quad mode for flash n25q128
on the board ls1021a-twr and solve flash Spansion and Micron
command conflict.
In switch {}, The value of command SPINOR_OP_RD_EVCR and
SPINOR_OP_SPANSION_RDAR is the same. They have to share
the same seq_id: SEQID_RDAR_OR_RD_EVCR.

Signed-off-by: Yunhui Cui <yunhui.cui@xxxxxxx>
---
drivers/mtd/spi-nor/fsl-quadspi.c | 47 ++++++++++++++++++++++++++++++---------
1 file changed, 36 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c
index 5d9d192..fea18b6 100644
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
@@ -207,9 +207,9 @@
#define SEQID_RDCR 9
#define SEQID_EN4B 10
#define SEQID_BRWR 11
-#define SEQID_RDAR 12
+#define SEQID_RDAR_OR_RD_EVCR 12
#define SEQID_WRAR 13
-
+#define SEQID_WD_EVCR 14

#define QUADSPI_MIN_IOMAP SZ_4M

@@ -393,6 +393,7 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
int rxfifo = q->devtype_data->rxfifo;
u32 lut_base;
int i;
+ const struct fsl_qspi_devtype_data *devtype_data = q->devtype_data;

struct spi_nor *nor = &q->nor[0];
u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
@@ -489,16 +490,26 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR),
base + QUADSPI_LUT(lut_base));

+
/*
- * Read any device register.
- * Used for Spansion S25FS-S family flash only.
+ * Flash Micron and Spansion command confilict
+ * use the same value 0x65. But it indicates different meaning.
*/
- lut_base = SEQID_RDAR * 4;
- qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) |
- LUT1(ADDR, PAD1, ADDR24BIT),
- base + QUADSPI_LUT(lut_base));
- qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1),
- base + QUADSPI_LUT(lut_base + 1));
+ lut_base = SEQID_RDAR_OR_RD_EVCR * 4;
+ if (devtype_data->devtype == FSL_QUADSPI_LS2080A) {
+ /*
+ * Read any device register.
+ * Used for Spansion S25FS-S family flash only.
+ */
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) |
+ LUT1(ADDR, PAD1, ADDR24BIT),
+ base + QUADSPI_LUT(lut_base));
+ qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1),
+ base + QUADSPI_LUT(lut_base + 1));
+ } else {
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RD_EVCR),
+ base + QUADSPI_LUT(lut_base));
+ }

/*
* Write any device register.
@@ -511,6 +522,11 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q)
qspi_writel(q, LUT0(FSL_WRITE, PAD1, 1),
base + QUADSPI_LUT(lut_base + 1));

+ /* Write EVCR register */
+ lut_base = SEQID_WD_EVCR * 4;
+ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WD_EVCR),
+ base + QUADSPI_LUT(lut_base));
+
fsl_qspi_lock_lut(q);
}

@@ -523,8 +539,15 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
case SPINOR_OP_READ_FAST:
case SPINOR_OP_READ4_FAST:
return SEQID_READ;
+ /*
+ * Spansion & Micron use the same command value 0x65
+ * Spansion: SPINOR_OP_SPANSION_RDAR, read any register.
+ * Micron: SPINOR_OP_RD_EVCR,
+ * read enhanced volatile configuration register.
+ * case SPINOR_OP_RD_EVCR:
+ */
case SPINOR_OP_SPANSION_RDAR:
- return SEQID_RDAR;
+ return SEQID_RDAR_OR_RD_EVCR;
case SPINOR_OP_SPANSION_WRAR:
return SEQID_WRAR;
case SPINOR_OP_WREN:
@@ -550,6 +573,8 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd)
return SEQID_EN4B;
case SPINOR_OP_BRWR:
return SEQID_BRWR;
+ case SPINOR_OP_WD_EVCR:
+ return SEQID_WD_EVCR;
default:
if (cmd == q->nor[0].erase_opcode)
return SEQID_SE;
--
2.1.0.27.g96db324