Re: [RFC v5 7/7] vfio-pci: Allow to mmap MSI-X table if interrupt remapping is supported

From: Yongji Xie
Date: Fri Apr 08 2016 - 06:31:56 EST


Hi Eric,
On 2016/4/8 17:10, Eric Auger wrote:
Hi Yongji,
On 04/08/2016 10:14 AM, Yongji Xie wrote:
Hi Eric,
On 2016/4/7 22:23, Eric Auger wrote:
Hi Yongji,
On 04/07/2016 01:38 PM, Yongji Xie wrote:
On 2016/4/6 22:45, Alex Williamson wrote:
On Tue, 5 Apr 2016 21:46:44 +0800
Yongji Xie <xyjxie@xxxxxxxxxxxxxxxxxx> wrote:

This patch enables mmapping MSI-X tables if
hardware supports interrupt remapping which
can ensure that a given pci device can only
shoot the MSIs assigned for it.

Signed-off-by: Yongji Xie <xyjxie@xxxxxxxxxxxxxxxxxx>
---
drivers/vfio/pci/vfio_pci.c | 9 +++++++--
drivers/vfio/pci/vfio_pci_private.h | 1 +
drivers/vfio/pci/vfio_pci_rdwr.c | 2 +-
3 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index c60d790..ef02896 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -201,6 +201,10 @@ static int vfio_pci_enable(struct
vfio_pci_device *vdev)
} else
vdev->msix_bar = 0xFF;
+ if (iommu_capable(pdev->dev.bus, IOMMU_CAP_INTR_REMAP) ||
This doesn't address the issue I raised earlier where ARM SMMU sets
this capability, but doesn't really provide per vector isolation. ARM
either needs to be fixed or we need to consider the whole capability
tainted for this application and standardize around the bus flags.
It's not very desirable to have two different ways to test this anyway.
I saw Eric posted a patchset [1] which introduce a flag
MSI_FLAG_IRQ_REMAPPING to indicate the capability
for ARM SMMU. With this patchset applied, it would
be workable to use bus_flags to test the capability
of ARM SMMU:
My purpose was to remove the advertising of IOMMU_CAP_INTR_REMAP from
arm-smmu.c, "fix" mentionned by Alex (by the way I also need to do the
same in v3 code) and to advertise the functionality on MSI controller
instead (since the IRQ REMAPPING functionality is abstracted in GICv3
ITS MSI controller)
Thank you for your explanation. Now we have three
flags to test this capability with your and my patches
applied. We need to test something like
IOMMU_CAP_INTR_REMAP || MSI_FLAG_IRQ_REMAPPING ||
PCI_BUS_FLAGS_MSI_REMAP if we want to mmap
MSI-X table. It's not very desirable if I understood
Alex correctly. So I'm thinking whether we can make
bus_flags compatible with other two flags and only
test bus_flags here.

On top of that, on ARM we have platform (non PCI) MSI controllers so my
understanding is the capability advertising should be possible beyond
the PCI bus?
Actually, we just need one flag which can standardize
the capability on PCI side. With this flag set, we can
easily know hardware supports the capability of
interrupt remapping and it's safe to mmap MSI-X
tables of PCI BARs in any userspace driver.
I agree with you on the fact storing the info at a single place looks
better. However my question was: if my understanding is correct, you
plan to store the info in pci_bus flags. What about platform_bus? Don't
we need to advertise the IRQ remapping capability also with a platform
bus topology? We can have platform devices writing to a platform MSI
controller that supports irq remapping. Assignment of such devices is
not considered yet though and maybe not feasible. I don't know if the
capability is used in other use cases.

My purpose is to make bus_flags compatible with other
two flags so that we can only test bus_flags when mmapping
MSI-X table. We would not remove the flag
MSI_FLAG_IRQ_REMAPPING and IOMMU_CAP_INTR_REMAP.
So we still can test these two flags if we have platform
devices writing to a platform MSI controller.

Of course, it would be better to have a flag which can
advertise the IRQ remapping capability for both PCI
bus and platform bus. But now I don't find a proper
way to achieve that...

Regards,
Yongji

Best Regards

Eric
Of course, we can also achieve that by testing all the
three flags. But I'm not sure whether it is good enough.

Regards,
Yongji

Best Regards

Eric
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index a080f44..b2d1756 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -1134,6 +1134,21 @@ void *msi_desc_to_pci_sysdata(struct msi_desc
*desc)
}
EXPORT_SYMBOL_GPL(msi_desc_to_pci_sysdata);

+void pci_check_msi_remapping(struct pci_bus *bus)
+{
+#ifdef CONFIG_GENERIC_MSI_IRQ_DOMAIN
+ struct irq_domain *domain;
+ struct msi_domain_info *info;
+
+ domain = dev_get_msi_domain(&bus->dev);
+ if (domain) {
+ info = msi_get_domain_info(domain);
+ if (info->flags & MSI_FLAG_IRQ_REMAPPING)
+ pdev->bus->bus_flags |=
PCI_BUS_FLAGS_MSI_REMAP;
+ }
+#endif
+}
+
#ifdef CONFIG_PCI_MSI_IRQ_DOMAIN
/**
* pci_msi_domain_write_msg - Helper to write MSI message to PCI
config
space
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6d7ab9b..24e9606 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2115,6 +2115,7 @@ struct pci_bus *pci_create_root_bus(struct device
*parent, int bus,
device_enable_async_suspend(b->bridge);
pci_set_bus_of_node(b);
pci_set_bus_msi_domain(b);
+ pci_check_msi_remapping(b);

if (!parent)
set_dev_node(b->bridge, pcibus_to_node(b));
diff --git a/include/linux/msi.h b/include/linux/msi.h
index a2a0068..fe8ce7b 100644
--- a/include/linux/msi.h
+++ b/include/linux/msi.h
@@ -15,6 +15,7 @@ extern int pci_msi_ignore_mask;
struct irq_data;
struct msi_desc;
struct pci_dev;
+struct pci_bus;
struct platform_msi_priv_data;
void __get_cached_msi_msg(struct msi_desc *entry, struct msi_msg
*msg);
void get_cached_msi_msg(unsigned int irq, struct msi_msg *msg);
@@ -155,6 +156,8 @@ void arch_restore_msi_irqs(struct pci_dev *dev);
void default_teardown_msi_irqs(struct pci_dev *dev);
void default_restore_msi_irqs(struct pci_dev *dev);

+void pci_check_msi_remapping(struct pci_bus *bus);
+
struct msi_controller {
struct module *owner;
struct device *dev;

Next we just need to find a proper way to make
bus_flags compatible with IOMMU_CAP_INTR_REMAP, right?

I think a good place to do that is add_iommu_group().
But I'm not sure whether iommu drivers must be
initialized after PCI enumeration. Do you have any comment?

[1] http://www.spinics.net/lists/kvm/msg130256.html

+ pdev->bus->bus_flags | PCI_BUS_FLAGS_MSI_REMAP)
Perhaps some sort of wrapper for testing these flags would help avoid
this kind of coding error (| vs &)
Thank you. I'll try not to make the same mistake again.

Regards,
Yongji

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html