Re: [PATCH] i2c: designware-platdrv: get fast/std speed scl high/low count from DT

From: Andy Shevchenko
Date: Thu Apr 07 2016 - 14:05:41 EST


On Wed, Apr 6, 2016 at 10:28 AM, Jisheng Zhang <jszhang@xxxxxxxxxxx> wrote:
> Sometimes, it's convenient to define the scl's high/low count directly,
> e.g HW people would do some measurement then directly give out the
> optimum counts. Previously, we solved the sda falling time and scl
> falling time by i2c_dw_scl_hcnt() and i2c_dw_scl_lcnt(), then put them
> into dt, but what we really care isn't the sda/scl falling time.
>
> From another side, the dw_i2c_acpi_configure() on ACPI platform also
> get hcnt/lcnt values rather than the sda/scl falling time from ACPI
> method, we want similar feature for DT platforms.
>

Instead of duplicating some words maybe better to explicitly define
two groups of parameters and one which supersedes the other.

> Signed-off-by: Jisheng Zhang <jszhang@xxxxxxxxxxx>
> ---
> Documentation/devicetree/bindings/i2c/i2c-designware.txt | 16 ++++++++++++++++
> drivers/i2c/busses/i2c-designware-platdrv.c | 8 ++++++++
> 2 files changed, 24 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> index fee26dc..05176fbf 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
> @@ -20,6 +20,22 @@ Optional properties :
> - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
> This value which is by default 300ns is used to compute the tHIGH period.
>
> + - i2c-ss-scl-high-count : should contain the standard speed i2c clock SCL high
> + count. If defined, the i2c-scl-falling-time-ns and i2c-sda-falling-time-ns
> + will be ignored.
> +
> + - i2c-ss-scl-low-count : should contain the standard speed i2c clock SCL low
> + count. If defined, the i2c-scl-falling-time-ns and i2c-sda-falling-time-ns
> + will be ignored.
> +
> + - i2c-fs-scl-high-count : should contain the fast speed i2c clock SCL high
> + count. If defined, the i2c-scl-falling-time-ns and i2c-sda-falling-time-ns
> + will be ignored.
> +
> + - i2c-fs-scl-low-count : should contain the fast speed i2c clock SCL low
> + count. If defined, the i2c-scl-falling-time-ns and i2c-sda-falling-time-ns
> + will be ignored.
> +
> Example :
>
> i2c@f0000 {
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
> index d656657..8739a60 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -188,6 +188,14 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
> &dev->scl_falling_time);
> device_property_read_u32(&pdev->dev, "clock-frequency",
> &clk_freq);
> + device_property_read_u16(&pdev->dev, "i2c-ss-scl-high-count",
> + &dev->ss_hcnt);
> + device_property_read_u16(&pdev->dev, "i2c-ss-scl-low-count",
> + &dev->ss_lcnt);
> + device_property_read_u16(&pdev->dev, "i2c-fs-scl-high-count",
> + &dev->fs_hcnt);
> + device_property_read_u16(&pdev->dev, "i2c-fs-scl-low-count",
> + &dev->fs_lcnt);
> }
>
> if (has_acpi_companion(&pdev->dev))
> --
> 2.8.0.rc3
>



--
With Best Regards,
Andy Shevchenko