Re: [PATCH v12 8/9] add TC G210 platform driver

[Joao Pinto]

Hi Rob,

On 4/4/2016 6:15 AM, Rob Herring wrote:
> On Thu, Mar 31, 2016 at 07:57:21PM +0100, Joao Pinto wrote:
>> This patch adds a glue platform driver for the Synopsys G210 Test Chip.
>>
>> Signed-off-by: Joao Pinto <jpinto@xxxxxxxxxxxx>
>> ---

[snip]

>> +
>> +Required properties:
>> +- compatible	: compatible list must contain the PHY type & version:
>> +			"snps, g210-tc-6.00-20bit"
>> +			"snps, g210-tc-6.00-40bit"
> Remove the space              ^
> 
>> +		  complemented with the Controller IP version:
>> +			"snps, dwc-ufshcd-1.40a"
> 
> ditto

Ok, will do that!

> 
> Combining the phy and controller compatible strings is a bit strange. 
> Generally, they would be separate nodes using the common phy binding.
> 

Correct, but in this case is just the compatibility string is just to tell the
dw ufs host that it has a 40-bit or a 20-bit test chip connected. The Test chip
is initialized by a unipro command sequence and there is no more ops related to it.

>> +		  complemented with the JEDEC version:
>> +			"jedec,ufs-1.1"
>> +			"jedec,ufs-2.0"
>> +
>> +- reg		: <registers mapping>
>> +- interrupts	: <interrupt mapping for UFS host controller IRQ>
>> +
>> +Example for a setup using a 1.40a DWC Controller with a 6.00 G210 40-bit TC:
>> +	dwc_ufs@d0000000 {
> 
> No underscores please.

Ok, will update it.

> 
>> +		compatible = "snps, g210-tc-6.00-40bit",
>> +			     "snps, dwc-ufshcd-1.40a",
>> +			     "jedec,ufs-2.0";
>> +		reg = < 0xd0000000 0x10000 >;
>> +		interrupts = < 24 >;
>> +	};
> 

Will send a v13 with these tweaks.

Thanks.