[PATCH v4 4/6] pinctrl: baytrail: Update irq chip operations

From: Cristina Ciocan
Date: Fri Apr 01 2016 - 06:55:55 EST


This patch updates the irq chip implementation in order to interact with
the pin control chip model: the chip contains reference to SOC data and
pin/group/community information is retrieved through the SOC reference.

Signed-off-by: Cristina Ciocan <cristina.ciocan@xxxxxxxxx>
---
drivers/pinctrl/intel/pinctrl-baytrail.c | 97 +++++++++++++++++---------------
1 file changed, 51 insertions(+), 46 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-baytrail.c b/drivers/pinctrl/intel/pinctrl-baytrail.c
index a24b51e..f7c752b 100644
--- a/drivers/pinctrl/intel/pinctrl-baytrail.c
+++ b/drivers/pinctrl/intel/pinctrl-baytrail.c
@@ -1120,41 +1120,6 @@ static int byt_gpio_request(struct gpio_chip *chip, unsigned int offset)
return 0;
}

-static int byt_irq_type(struct irq_data *d, unsigned type)
-{
- struct byt_gpio *vg = gpiochip_get_data(irq_data_get_irq_chip_data(d));
- u32 offset = irqd_to_hwirq(d);
- u32 value;
- unsigned long flags;
- void __iomem *reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
-
- if (offset >= vg->chip.ngpio)
- return -EINVAL;
-
- raw_spin_lock_irqsave(&vg->lock, flags);
- value = readl(reg);
-
- WARN(value & BYT_DIRECT_IRQ_EN,
- "Bad pad config for io mode, force direct_irq_en bit clearing");
-
- /* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
- * are used to indicate high and low level triggering
- */
- value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG |
- BYT_TRIG_LVL);
-
- writel(value, reg);
-
- if (type & IRQ_TYPE_EDGE_BOTH)
- irq_set_handler_locked(d, handle_edge_irq);
- else if (type & IRQ_TYPE_LEVEL_MASK)
- irq_set_handler_locked(d, handle_level_irq);
-
- raw_spin_unlock_irqrestore(&vg->lock, flags);
-
- return 0;
-}
-
static void byt_get_pull_strength(u32 reg, u16 *strength)
{
switch (reg & BYT_PULL_STR_MASK) {
@@ -1565,12 +1530,23 @@ static void byt_irq_ack(struct irq_data *d)
unsigned offset = irqd_to_hwirq(d);
void __iomem *reg;

- raw_spin_lock(&vg->lock);
reg = byt_gpio_reg(vg, offset, BYT_INT_STAT_REG);
+ if (!reg)
+ return;
+
+ raw_spin_lock(&vg->lock);
writel(BIT(offset % 32), reg);
raw_spin_unlock(&vg->lock);
}

+static void byt_irq_mask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct byt_gpio *vg = gpiochip_get_data(gc);
+
+ byt_gpio_clear_triggering(vg, irqd_to_hwirq(d));
+}
+
static void byt_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
@@ -1581,6 +1557,8 @@ static void byt_irq_unmask(struct irq_data *d)
u32 value;

reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);
+ if (!reg)
+ return;

raw_spin_lock_irqsave(&vg->lock, flags);
value = readl(reg);
@@ -1606,21 +1584,48 @@ static void byt_irq_unmask(struct irq_data *d)
raw_spin_unlock_irqrestore(&vg->lock, flags);
}

-static void byt_irq_mask(struct irq_data *d)
+static int byt_irq_type(struct irq_data *d, unsigned int type)
{
- struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
- struct byt_gpio *vg = gpiochip_get_data(gc);
+ struct byt_gpio *vg = gpiochip_get_data(irq_data_get_irq_chip_data(d));
+ u32 offset = irqd_to_hwirq(d);
+ u32 value;
+ unsigned long flags;
+ void __iomem *reg = byt_gpio_reg(vg, offset, BYT_CONF0_REG);

- byt_gpio_clear_triggering(vg, irqd_to_hwirq(d));
+ if (!reg || offset >= vg->chip.ngpio)
+ return -EINVAL;
+
+ raw_spin_lock_irqsave(&vg->lock, flags);
+ value = readl(reg);
+
+ WARN(value & BYT_DIRECT_IRQ_EN,
+ "Bad pad config for io mode, force direct_irq_en bit clearing");
+
+ /* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
+ * are used to indicate high and low level triggering
+ */
+ value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG |
+ BYT_TRIG_LVL);
+
+ writel(value, reg);
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ irq_set_handler_locked(d, handle_edge_irq);
+ else if (type & IRQ_TYPE_LEVEL_MASK)
+ irq_set_handler_locked(d, handle_level_irq);
+
+ raw_spin_unlock_irqrestore(&vg->lock, flags);
+
+ return 0;
}

static struct irq_chip byt_irqchip = {
- .name = "BYT-GPIO",
- .irq_ack = byt_irq_ack,
- .irq_mask = byt_irq_mask,
- .irq_unmask = byt_irq_unmask,
- .irq_set_type = byt_irq_type,
- .flags = IRQCHIP_SKIP_SET_WAKE,
+ .name = "BYT-GPIO",
+ .irq_ack = byt_irq_ack,
+ .irq_mask = byt_irq_mask,
+ .irq_unmask = byt_irq_unmask,
+ .irq_set_type = byt_irq_type,
+ .flags = IRQCHIP_SKIP_SET_WAKE,
};

static void byt_gpio_irq_init_hw(struct byt_gpio *vg)
--
1.9.1