[PATCH v3 5/8] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk

From: Chanwoo Choi
Date: Tue Mar 15 2016 - 03:39:27 EST


This patch adds initial pin configuration of MMC2 device on exynos3250-monk
board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state.

Suggested-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 443a35085846..dab965f35352 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -558,7 +558,17 @@

&pinctrl_1 {
pinctrl-names = "default";
- pinctrl-0 = <&sleep1>;
+ pinctrl-0 = <&initial1 &sleep1>;
+
+ initial1: initial-state {
+ PIN_IN(gpk2-0, DOWN, LV1);
+ PIN_IN(gpk2-1, DOWN, LV1);
+ PIN_IN(gpk2-2, DOWN, LV1);
+ PIN_IN(gpk2-3, DOWN, LV1);
+ PIN_IN(gpk2-4, DOWN, LV1);
+ PIN_IN(gpk2-5, DOWN, LV1);
+ PIN_IN(gpk2-6, DOWN, LV1);
+ };

sleep1: sleep-state {
PIN_SLP(gpe0-0, PREV, NONE);
--
1.9.1