Re: [PATCH] rtc: s3c: Don't print an error on probe deferral

[Joe Perches]

On Mon, 2016-03-14 at 16:05 -0300, Javier Martinez Canillas wrote:
> The clock and source clock looked up by the driver may not be available
> just because the clock controller driver was not probed yet so printing
> an error in this case is not correct and only adds confusion to users.
> 
> However, knowing that a driver's probe was deferred may be useful so it
> can be printed as debug information.
[]
> diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
[]
> @@ -501,18 +501,27 @@ static int s3c_rtc_probe(struct platform_device *pdev)
>  
>  	info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
>  	if (IS_ERR(info->rtc_clk)) {
> -		dev_err(&pdev->dev, "failed to find rtc clock\n");
> -		return PTR_ERR(info->rtc_clk);
> +		ret = PTR_ERR(info->rtc_clk);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(&pdev->dev, "failed to find rtc clock\n");
> +		else
> +			dev_dbg(&pdev->dev, "probe deferred due rtc clock\n");
> +		return ret;
>  	}
>  	clk_prepare_enable(info->rtc_clk);
>  
>  	if (info->data->needs_src_clk) {
>  		info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
>  		if (IS_ERR(info->rtc_src_clk)) {
> -			dev_err(&pdev->dev,
> -				"failed to find rtc source clock\n");
> +			ret = PTR_ERR(info->rtc_src_clk);
> +			if (ret != -EPROBE_DEFER)
> +				dev_err(&pdev->dev,
> +					"failed to find rtc source clock\n");
> +			else
> +				dev_dbg(&pdev->dev,
> +					"probe deferred due rtc source clock\n");
>  			clk_disable_unprepare(info->rtc_clk);
> -			return PTR_ERR(info->rtc_src_clk);
> +			return ret;
>  		}
>  		clk_prepare_enable(info->rtc_src_clk);
>  	}

Maybe the debug logging messages could be object->action like:

	rtc clock probe deferred
	rtc source clock probe deferred