Re: [PATCH v11 7/9] arm64: Add trampoline code for kretprobes

From: Marc Zyngier
Date: Sun Mar 13 2016 - 09:52:30 EST


On Wed, 9 Mar 2016 00:32:21 -0500
David Long <dave.long@xxxxxxxxxx> wrote:

David,

I remember looking at that code over your shoulder whilst at Connect
last week, but I clearly wasn't running on all cylinders, because there
is a few gotchas here - see below.

> From: William Cohen <wcohen@xxxxxxxxxx>
>
> The trampoline code is used by kretprobes to capture a return from a probed
> function. This is done by saving the registers, calling the handler, and
> restoring the registers. The code then returns to the original saved caller
> return address. It is necessary to do this directly instead of using a
> software breakpoint because the code used in processing that breakpoint
> could itself be kprobe'd and cause a problematic reentry into the debug
> exception handler.
>
> Signed-off-by: William Cohen <wcohen@xxxxxxxxxx>
> Signed-off-by: David A. Long <dave.long@xxxxxxxxxx>
> ---
> arch/arm64/include/asm/kprobes.h | 2 +
> arch/arm64/kernel/Makefile | 1 +
> arch/arm64/kernel/asm-offsets.c | 11 +++++
> arch/arm64/kernel/kprobes.c | 5 ++
> arch/arm64/kernel/kprobes_trampoline.S | 88 ++++++++++++++++++++++++++++++++++
> 5 files changed, 107 insertions(+)
> create mode 100644 arch/arm64/kernel/kprobes_trampoline.S
>
> diff --git a/arch/arm64/include/asm/kprobes.h b/arch/arm64/include/asm/kprobes.h
> index 79c9511..61b4915 100644
> --- a/arch/arm64/include/asm/kprobes.h
> +++ b/arch/arm64/include/asm/kprobes.h
> @@ -56,5 +56,7 @@ int kprobe_exceptions_notify(struct notifier_block *self,
> unsigned long val, void *data);
> int kprobe_breakpoint_handler(struct pt_regs *regs, unsigned int esr);
> int kprobe_single_step_handler(struct pt_regs *regs, unsigned int esr);
> +void kretprobe_trampoline(void);
> +void __kprobes *trampoline_probe_handler(struct pt_regs *regs);
>
> #endif /* _ARM_KPROBES_H */
> diff --git a/arch/arm64/kernel/Makefile b/arch/arm64/kernel/Makefile
> index 08325e5..f192b7d 100644
> --- a/arch/arm64/kernel/Makefile
> +++ b/arch/arm64/kernel/Makefile
> @@ -37,6 +37,7 @@ arm64-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
> arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
> arm64-obj-$(CONFIG_KGDB) += kgdb.o
> arm64-obj-$(CONFIG_KPROBES) += kprobes.o kprobes-arm64.o \
> + kprobes_trampoline.o \
> probes-simulate-insn.o
> arm64-obj-$(CONFIG_EFI) += efi.o efi-entry.stub.o
> arm64-obj-$(CONFIG_PCI) += pci.o
> diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
> index fffa4ac6..f7cc8ce 100644
> --- a/arch/arm64/kernel/asm-offsets.c
> +++ b/arch/arm64/kernel/asm-offsets.c
> @@ -50,6 +50,17 @@ int main(void)
> DEFINE(S_X5, offsetof(struct pt_regs, regs[5]));
> DEFINE(S_X6, offsetof(struct pt_regs, regs[6]));
> DEFINE(S_X7, offsetof(struct pt_regs, regs[7]));
> + DEFINE(S_X8, offsetof(struct pt_regs, regs[8]));
> + DEFINE(S_X10, offsetof(struct pt_regs, regs[10]));
> + DEFINE(S_X12, offsetof(struct pt_regs, regs[12]));
> + DEFINE(S_X14, offsetof(struct pt_regs, regs[14]));
> + DEFINE(S_X16, offsetof(struct pt_regs, regs[16]));
> + DEFINE(S_X18, offsetof(struct pt_regs, regs[18]));
> + DEFINE(S_X20, offsetof(struct pt_regs, regs[20]));
> + DEFINE(S_X22, offsetof(struct pt_regs, regs[22]));
> + DEFINE(S_X24, offsetof(struct pt_regs, regs[24]));
> + DEFINE(S_X26, offsetof(struct pt_regs, regs[26]));
> + DEFINE(S_X28, offsetof(struct pt_regs, regs[28]));
> DEFINE(S_LR, offsetof(struct pt_regs, regs[30]));
> DEFINE(S_SP, offsetof(struct pt_regs, sp));
> #ifdef CONFIG_COMPAT
> diff --git a/arch/arm64/kernel/kprobes.c b/arch/arm64/kernel/kprobes.c
> index ffc5affd..bd3f233 100644
> --- a/arch/arm64/kernel/kprobes.c
> +++ b/arch/arm64/kernel/kprobes.c
> @@ -532,6 +532,11 @@ int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
> return 1;
> }
>
> +void __kprobes __used *trampoline_probe_handler(struct pt_regs *regs)
> +{
> + return NULL;
> +}
> +
> int __init arch_init_kprobes(void)
> {
> return 0;
> diff --git a/arch/arm64/kernel/kprobes_trampoline.S b/arch/arm64/kernel/kprobes_trampoline.S
> new file mode 100644
> index 0000000..072b4e5
> --- /dev/null
> +++ b/arch/arm64/kernel/kprobes_trampoline.S
> @@ -0,0 +1,88 @@
> +/*
> + * trampoline entry and return code for kretprobes.
> + */
> +
> +#include <linux/linkage.h>
> +#include <asm/asm-offsets.h>
> +#include <asm/assembler.h>
> +
> + .text
> +
> +.macro save_all_base_regs ctxt
> + stp x0, x1, [\ctxt, #S_X0]
> + stp x2, x3, [\ctxt, #S_X2]
> + stp x4, x5, [\ctxt, #S_X4]
> + stp x6, x7, [\ctxt, #S_X6]
> + stp x8, x9, [\ctxt, #S_X8]
> + stp x10, x11, [\ctxt, #S_X10]
> + stp x12, x13, [\ctxt, #S_X12]
> + stp x14, x15, [\ctxt, #S_X14]
> + stp x16, x17, [\ctxt, #S_X16]
> + stp x18, x19, [\ctxt, #S_X18]
> + stp x20, x21, [\ctxt, #S_X20]
> + stp x22, x23, [\ctxt, #S_X22]
> + stp x24, x25, [\ctxt, #S_X24]
> + stp x26, x27, [\ctxt, #S_X26]
> + stp x28, x29, [\ctxt, #S_X28]
> + str lr, [\ctxt, #S_LR]
> + add x0, \ctxt, #S_FRAME_SIZE
> + str x0, [\ctxt, #S_SP]

Nit: this could also be rewritten as:

add x0, \ctxt, #S_FRAME_SIZE
stp lr, xo, [\ctxt, #S_LR]

Another thing worth noting is that since your macro saves all the
GP registers, only SP can be used for the ctxt parameter. This means
you're better off hardcoding SP in this macro, and not give the
illusion of being generic.

> +/*
> + * Construct a useful saved PSTATE
> + */
> + mrs x0, nzcv
> + and x0, x0, #0xf0000000

It'd be worth spelling this as (PSR_N_BIT | PSR_Z_BIT | PSR_C_BIT |
PSR_V_BIT)...

> + mrs x1, daif
> + and x1, x1, #0x3c0

... and this as (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT).

> + orr x0, x0, x1
> + mrs x1, CurrentEL
> + and x1, x1, #12

I'd like this '12' to be a bit more explicit. How about (3 << 2)? I
tend to parse this kind of things much more easily...

> + lsl x1, x1, #21

What's that shift for? The various bits should be at the right place
already.

> + orr x0, x1, x0
> + mrs x1, SPSel
> + and x1, x1, #1
> + lsl x1, x1, #21

Same here (you're in single-step territory, which is probably not what
you want...).

> + orr x0, x1, x0
> + str x0, [\ctxt, #S_PSTATE]
> +.endm
> +
> +.macro restore_all_base_regs ctxt

Same remark about the pseudo-generic parameter.

> + ldr x0, [\ctxt, #S_PSTATE]
> + and x0, x0, #0xf0000000

Same remark about using the PSR_* macros.

> + msr nzcv, x0
> + ldp x0, x1, [\ctxt, #S_X0]
> + ldp x2, x3, [\ctxt, #S_X2]
> + ldp x4, x5, [\ctxt, #S_X4]
> + ldp x6, x7, [\ctxt, #S_X6]
> + ldp x8, x9, [\ctxt, #S_X8]
> + ldp x10, x11, [\ctxt, #S_X10]
> + ldp x12, x13, [\ctxt, #S_X12]
> + ldp x14, x15, [\ctxt, #S_X14]
> + ldp x16, x17, [\ctxt, #S_X16]
> + ldp x18, x19, [\ctxt, #S_X18]
> + ldp x20, x21, [\ctxt, #S_X20]
> + ldp x22, x23, [\ctxt, #S_X22]
> + ldp x24, x25, [\ctxt, #S_X24]
> + ldp x26, x27, [\ctxt, #S_X26]
> + ldp x28, x29, [\ctxt, #S_X28]
> +.endm
> +
> +ENTRY(kretprobe_trampoline)
> +
> + sub sp, sp, #S_FRAME_SIZE
> +
> + save_all_base_regs sp
> +
> + mov x0, sp
> + bl trampoline_probe_handler
> + /* Replace trampoline address in lr with actual
> + orig_ret_addr return address. */
> + mov lr, x0
> +
> + restore_all_base_regs sp
> +
> + add sp, sp, #S_FRAME_SIZE
> +
> + ret
> +
> +ENDPROC(kretprobe_trampoline)

Thanks,

M.
--
Jazz is not dead. It just smells funny.