[PATCH 3/8] tty: n_gsm: make mux work as a responder station

From: Andrej Krpic
Date: Sun Feb 21 2016 - 16:46:51 EST


Comment suggests that cr == 1 represents a received command and cr == 0
a received response. Received frames are then filtered:
- correctly by rejection of SABM and DISC responses, they are
command only frame types and
- incorrectly by rejection of UA (a response only frame type) responses.

Mux as a initiator successfully establishes DLC by receiving UA response
frame to a previously sent open channel command (SABM). Incorrect
equation (eqA) makes UA "reject cr == 0 commands" case correct, but
filters out all received SABM and DISC command frames.

Change eqA to eqB to match the intent and fix filtering of UA frames.
This enables reception of SABM and DISC frames and consequently
makes mux work as a responder station.

received receiving as eqA eqB 3GPP TS 27.010
CR bit initiator (ir) cr=CR^(1-ir) cr=CR^ir 5.2.1.2
0 0 1 0 0 (response)
1 0 _\ 0 1 1 (command)
0 1 / 0 1 1 (command)
1 1 1 0 0 (response)

Signed-off-by: Andrej Krpic <ak77@xxxxxxxxx>
---
drivers/tty/n_gsm.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index a0fb92c..05b562d 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1798,7 +1798,7 @@ static void gsm_queue(struct gsm_mux *gsm)

gsm_print_packet("<--", address, cr, gsm->control, gsm->buf, gsm->len);

- cr ^= 1 - gsm->initiator; /* Flip so 1 always means command */
+ cr ^= gsm->initiator; /* Flip so 1 always means command */
dlci = gsm->dlci[address];

switch (gsm->control) {
@@ -1829,7 +1829,7 @@ static void gsm_queue(struct gsm_mux *gsm)
break;
case UA:
case UA|PF:
- if (cr == 0 || dlci == NULL)
+ if (cr || dlci == NULL)
break;
switch (dlci->state) {
case DLCI_CLOSING:
--
2.7.0