[PATCH v5 10/26] mtd: nand: omap: Update DT binding documentation

From: Roger Quadros
Date: Fri Feb 19 2016 - 16:17:31 EST


Add compatible id and interrupts. The NAND interrupts are
provided by the GPMC controller node.

Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
Documentation/devicetree/bindings/mtd/gpmc-nand.txt | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index fb733c4..810b87b 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -13,7 +13,11 @@ Documentation/devicetree/bindings/mtd/nand.txt

Required properties:

- - reg: The CS line the peripheral is connected to
+ - compatible: "ti,omap2-nand"
+ - reg: range id (CS number), base offset and length of the
+ NAND I/O space
+ - interrupt-parent: must point to gpmc node
+ - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.

Optional properties:

@@ -55,20 +59,25 @@ Example for an AM33xx board:
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
- reg = <0x50000000 0x1000000>;
+ reg = <0x50000000 0x36c>;
interrupts = <100>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
- ranges = <0 0 0x08000000 0x2000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */
elm_id = <&elm>;

nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ compatible = "ti,omap2-nand";
+ reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */
+ interrupt-parent = <&gpmc>;
+ interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
ti,nand-xfer-type = "polled";
+ interrupt-parent = <&gpmc>;
+ interrupts = <0>, <1>;

gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
--
2.1.4