[PATCH 1/1] thermal: small style cleanup in mtk_thermal

From: Eduardo Valentin
Date: Thu Feb 18 2016 - 10:50:35 EST


Remove all checkpatch.pl --strict errors, checks, and warnings.

Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
Cc: Matthias Brugger <matthias.bgg@xxxxxxxxx>
Cc: linux-pm@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-mediatek@xxxxxxxxxxxxxxxxxxx
Cc: linux-kernel@xxxxxxxxxxxxxxx
Signed-off-by: Eduardo Valentin <edubezval@xxxxxxxxx>
---
Sascha,

Add your v12 in my forlinus branch. But also, on top of it
I cleaned the patch further with the following patch.

BR,

Eduardo

drivers/thermal/mtk_thermal.c | 56 ++++++++++++++++++++++---------------------
1 file changed, 29 insertions(+), 27 deletions(-)

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 589a138..3d93b1c 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -78,7 +78,7 @@

#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff)

-#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff)) << 16
+#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16)
#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff)

#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x)
@@ -108,15 +108,15 @@
#define MT8173_NUM_SENSORS_PER_ZONE 4

/* Layout of the fuses providing the calibration data */
-#define MT8173_CALIB_BUF0_VALID (1 << 0)
-#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22 ) & 0x3ff)
-#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17 ) & 0x1ff)
-#define MT8173_CALIB_BUF0_VTS_TS2(x) (((x) >> 8 ) & 0x1ff)
-#define MT8173_CALIB_BUF1_VTS_TS3(x) (((x) >> 0 ) & 0x1ff)
-#define MT8173_CALIB_BUF2_VTS_TS4(x) (((x) >> 23 ) & 0x1ff)
-#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14 ) & 0x1ff)
-#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1 ) & 0x3f)
-#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26 ) & 0x3f)
+#define MT8173_CALIB_BUF0_VALID BIT(0)
+#define MT8173_CALIB_BUF1_ADC_GE(x) (((x) >> 22) & 0x3ff)
+#define MT8173_CALIB_BUF0_VTS_TS1(x) (((x) >> 17) & 0x1ff)
+#define MT8173_CALIB_BUF0_VTS_TS2(x) (((x) >> 8) & 0x1ff)
+#define MT8173_CALIB_BUF1_VTS_TS3(x) (((x) >> 0) & 0x1ff)
+#define MT8173_CALIB_BUF2_VTS_TS4(x) (((x) >> 23) & 0x1ff)
+#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff)
+#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f)
+#define MT8173_CALIB_BUF0_O_SLOPE(x) (((x) >> 26) & 0x3f)

#define THERMAL_NAME "mtk-thermal"

@@ -136,6 +136,7 @@ struct mtk_thermal {

struct mtk_thermal_bank banks[MT8173_NUM_ZONES];

+ /* lock: for getting and putting banks */
struct mutex lock;

/* Calibration values */
@@ -271,11 +272,9 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
{
struct mtk_thermal *mt = bank->mt;
- int temp, i, max;
+ int i, temp = INT_MIN, max = INT_MIN;
u32 raw;

- temp = max = INT_MIN;
-
for (i = 0; i < bank_data[bank->id].num_sensors; i++) {
raw = readl(mt->thermal_base + sensing_points[i].msr);

@@ -322,7 +321,7 @@ static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
};

static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
- u32 apmixed_phys_base, u32 auxadc_phys_base)
+ u32 apmixed_phys_base, u32 auxadc_phys_base)
{
struct mtk_thermal_bank *bank = &mt->banks[num];
const struct mtk_thermal_bank_cfg *cfg = &bank_data[num];
@@ -346,7 +345,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,

/* poll is set to 10u */
writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
- mt->thermal_base + TEMP_AHBPOLL);
+ mt->thermal_base + TEMP_AHBPOLL);

/* temperature sampling control, 1 sample */
writel(0x0, mt->thermal_base + TEMP_MSRCTL0);
@@ -375,49 +374,50 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,

/* AHB address for auxadc mux selection */
writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
- mt->thermal_base + TEMP_ADCMUXADDR);
+ mt->thermal_base + TEMP_ADCMUXADDR);

/* AHB address for pnp sensor mux selection */
writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
- mt->thermal_base + TEMP_PNPMUXADDR);
+ mt->thermal_base + TEMP_PNPMUXADDR);

/* AHB value for auxadc enable */
writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN);

/* AHB address for auxadc enable (channel 0 immediate mode selected) */
writel(auxadc_phys_base + AUXADC_CON1_SET_V,
- mt->thermal_base + TEMP_ADCENADDR);
+ mt->thermal_base + TEMP_ADCENADDR);

/* AHB address for auxadc valid bit */
writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
- mt->thermal_base + TEMP_ADCVALIDADDR);
+ mt->thermal_base + TEMP_ADCVALIDADDR);

/* AHB address for auxadc voltage output */
writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
- mt->thermal_base + TEMP_ADCVOLTADDR);
+ mt->thermal_base + TEMP_ADCVOLTADDR);

/* read valid & voltage are at the same register */
writel(0x0, mt->thermal_base + TEMP_RDCTRL);

/* indicate where the valid bit is */
writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
- mt->thermal_base + TEMP_ADCVALIDMASK);
+ mt->thermal_base + TEMP_ADCVALIDMASK);

/* no shift */
writel(0x0, mt->thermal_base + TEMP_ADCVOLTAGESHIFT);

/* enable auxadc mux write transaction */
writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
- mt->thermal_base + TEMP_ADCWRITECTRL);
+ mt->thermal_base + TEMP_ADCWRITECTRL);

for (i = 0; i < cfg->num_sensors; i++)
writel(sensor_mux_values[cfg->sensors[i]],
- mt->thermal_base + sensing_points[i].adcpnp);
+ mt->thermal_base + sensing_points[i].adcpnp);

writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0);

- writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
- mt->thermal_base + TEMP_ADCWRITECTRL);
+ writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
+ TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
+ mt->thermal_base + TEMP_ADCWRITECTRL);

mtk_thermal_put_bank(bank);
}
@@ -434,7 +434,8 @@ static u64 of_get_phys_base(struct device_node *np)
return of_translate_address(np, regaddr_p);
}

-static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt)
+static int mtk_thermal_get_calibration_data(struct device *dev,
+ struct mtk_thermal *mt)
{
struct nvmem_cell *cell;
u32 *buf;
@@ -567,7 +568,8 @@ static int mtk_thermal_probe(struct platform_device *pdev)
}

for (i = 0; i < MT8173_NUM_ZONES; i++)
- mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base);
+ mtk_thermal_init_bank(mt, i, apmixed_phys_base,
+ auxadc_phys_base);

platform_set_drvdata(pdev, mt);

--
2.1.4