Re: [PATCH] pinctrl: sirf/atlas7: stop poking around in GPIO internals

From: Barry Song
Date: Wed Feb 17 2016 - 21:51:01 EST


Linus,
thanks!

2016-02-12 16:31 GMT+08:00 Linus Walleij <linus.walleij@xxxxxxxxxx>:
>
> This code is poking around in the gpio_chip:s internal structures
> to achieve some kind of pin to GPIO mappings.
>
> - It is wrong to poke around in these structs and the pinctrl
> maintainer was stupid to let it pass unnoticed, mea culpa.
>
> - The right interface to use is gpiochip_add_pin_range()

gpiochip_add(chip will call this automatically since range is set in dtsi:
gpio_0: gpio_mediam@17040000 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
compatible = "sirf,atlas7-gpio";
reg = <0x17040000 0x1000>;
interrupts = <0 13 0>, <0 14 0>;
clocks = <&car 98>;
clock-names = "gpio0_io";
gpio-controller;
interrupt-controller;

gpio-banks = <2>;
gpio-ranges = <&pinctrl 0 0 0>,
<&pinctrl 32 0 0>;
gpio-ranges-group-names = "lvds_gpio_grp",
"jtag_uart_nand_gpio_grp";
};

see:
https://git.kernel.org/cgit/linux/kernel/git/baohua/linux.git/tree/arch/arm/boot/dts/atlas7.dtsi?h=sirf-3.18#n2151

>
> - The code appears unused: the pin control part of the driver
> is not adding any ranges, so we're iterating over an empty
> list. Maybe it is poking around in some other pin controllers
> GPIO ranges, and that's just totally wrong, again use
> gpiochip_add_pin_range() and specify the right pin
> controller.
>
> Cc: Barry Song <baohua@xxxxxxxxxx>
> Cc: Guoying Zhang <Guoying.Zhang@xxxxxxx>
> Cc: Wei Chen <Wei.Chen@xxxxxxx>
> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> ---
> SiRF maintainers: look at this immediately and explain what is
> going on.
> ---
> drivers/pinctrl/sirf/pinctrl-atlas7.c | 18 ------------------
> 1 file changed, 18 deletions(-)
>
> diff --git a/drivers/pinctrl/sirf/pinctrl-atlas7.c b/drivers/pinctrl/sirf/pinctrl-atlas7.c
> index beb024c31a5d..3d233fc3448a 100644
> --- a/drivers/pinctrl/sirf/pinctrl-atlas7.c
> +++ b/drivers/pinctrl/sirf/pinctrl-atlas7.c
> @@ -338,7 +338,6 @@ struct atlas7_pinctrl_data {
> #define ATLAS7_GPIO_CTL_DATAIN_MASK BIT(7)
>
> struct atlas7_gpio_bank {
> - struct pinctrl_dev *pctldev;

this is ok.

> int id;
> int irq;
> void __iomem *base;
> @@ -6070,7 +6069,6 @@ static int atlas7_gpio_probe(struct platform_device *pdev)
> }
>
> for (idx = 0; idx < nbank; idx++) {
> - struct gpio_pin_range *pin_range;
> struct atlas7_gpio_bank *bank;
>
> bank = &a7gc->banks[idx];
> @@ -6088,22 +6086,6 @@ static int atlas7_gpio_probe(struct platform_device *pdev)
>
> gpiochip_set_chained_irqchip(chip, &atlas7_gpio_irq_chip,
> bank->irq, atlas7_gpio_handle_irq);
> -
> - /* Records gpio_pin_range to a7gc */
> - list_for_each_entry(pin_range, &chip->pin_ranges, node) {
> - struct pinctrl_gpio_range *range;
> -
> - range = &pin_range->range;
> - if (range->id == NGPIO_OF_BANK * idx) {
> - bank->gpio_offset = range->id;
> - bank->ngpio = range->npins;
> - bank->gpio_pins = range->pins;
> - bank->pctldev = pin_range->pctldev;
> - break;
> - }
> - }
> -
> - BUG_ON(!bank->pctldev);

this doesn't work. my pin range is not continuous and linear, so we
need the "if (range->id == NGPIO_OF_BANK * idx)" to calculate the
gpio_offset.
and gpio_offset is used in many places:
5637
5638 static int __atlas7_gpio_to_pin(struct atlas7_gpio_chip *a7gc, u32 gpio)
5639 {
5640 struct atlas7_gpio_bank *bank;
5641 u32 ofs;
5642
5643 bank = atlas7_gpio_to_bank(a7gc, gpio);
5644 ofs = gpio - bank->gpio_offset;
5645 if (ofs >= bank->ngpio)
5646 return -ENODEV;
5647
5648 return bank->gpio_pins[ofs];
5649 }


5651 static void atlas7_gpio_irq_ack(struct irq_data *d)
5652 {
5653 struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
5654 struct atlas7_gpio_chip *a7gc = to_atlas7_gpio(gc);
5655 struct atlas7_gpio_bank *bank;
5656 void __iomem *ctrl_reg;
5657 u32 val, pin_in_bank;
5658 unsigned long flags;
5659
5660 bank = atlas7_gpio_to_bank(a7gc, d->hwirq);
5661 pin_in_bank = d->hwirq - bank->gpio_offset;
5662 ctrl_reg = ATLAS7_GPIO_CTRL(bank, pin_in_bank);
5663
5664 spin_lock_irqsave(&a7gc->lock, flags);
5665
5666 val = readl(ctrl_reg);
5667 /* clear interrupt status */
5668 writel(val, ctrl_reg);
5669
5670 spin_unlock_irqrestore(&a7gc->lock, flags);
5671 }

...


> }
>
> platform_set_drvdata(pdev, a7gc);
> --


-barry