Re: arm qemu test failures due to 'driver-core: platform: probe of-devices only using list of compatibles'

[Robin Murphy]

On 15/02/16 10:59, Uwe Kleine-König wrote:
> Hello Guenter,
>
> On Sun, Feb 14, 2016 at 08:50:10AM -0800, Guenter Roeck wrote:
> > Uwe,
> >
> > Your patch 'driver-core: platform: probe of-devices only using list of
> > compatibles' causes the following qemu tests to crash in -next.
> >
> > arm:vexpress-a9:vexpress_defconfig:vexpress-v2p-ca9
> > arm:vexpress-a15:vexpress_defconfig:vexpress-v2p-ca15-tc1
> > arm:vexpress-a9:multi_v7_defconfig:vexpress-v2p-ca9
> > arm:vexpress-a15:multi_v7_defconfig:vexpress-v2p-ca15-tc1
> >
> > Crash log:
> >
> > VFS: Cannot open root device "mmcblk0" or unknown-block(0,0): error -6
> > Please append a correct "root=" boot option; here are the available partitions:
> > 1f00          131072 mtdblock0  (driver?)
> > 1f01           32768 mtdblock1  (driver?)
> > Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
>
> Can you provide a complete boot log? This might already reveal which
> device is failing. It might not be the mmci device but something it
> depends on (clock, bus parent, irq).

FWIW the PL180 on my Juno still works fine with this patch picked on top 
of -rc3, so the issue would seem to be something else - From a quick 
comparison between the DTs I see a slight difference in compatible 
strings for the clocks, but the more likely-looking suspect is that the 
VExpress DT references some GPIOs where the Juno DT doesn't.

Robin.

> Best regards
> Uwe