RE: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities

[Sricharan]

Hi Wolfram,

> -----Original Message-----
> From: Wolfram Sang [mailto:wsa@xxxxxxxxxxxxx]
> Sent: Saturday, February 13, 2016 12:08 AM
> To: Sricharan R
> Cc: devicetree@xxxxxxxxxxxxxxx; linux-arm-msm@xxxxxxxxxxxxxxx;
> agross@xxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-
> i2c@xxxxxxxxxxxxxxx; iivanov@xxxxxxxxxx; galak@xxxxxxxxxxxxxx;
> dmaengine@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> andy.gross@xxxxxxxxxx; ntelkar@xxxxxxxxxxxxxx; architt@xxxxxxxxxxxxxx
> Subject: Re: [PATCH V7 4/6] i2c: qup: Add bam dma capabilities
> 
> On Tue, Jan 19, 2016 at 03:32:44PM +0530, Sricharan R wrote:
> > QUP cores can be attached to a BAM module, which acts as a dma engine
> > for the QUP core. When DMA with BAM is enabled, the BAM consumer
> pipe
> > transmitted data is written to the output FIFO and the BAM producer
> > pipe received data is read from the input FIFO.
> >
> > With BAM capabilities, qup-i2c core can transfer more than
> > 256 bytes, without a 'stop' which is not possible otherwise.
> >
> > Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
> > Reviewed-by: Andy Gross <andy.gross@xxxxxxxxxx>
> > Tested-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
> > Tested-by: Telkar Nagender <ntelkar@xxxxxxxxxxxxxx>
> 
> My code checkers found some issues:
> 
>     SPARSE
> drivers/i2c/busses/i2c-qup.c:555:6: warning: symbol 'qup_sg_set_buf' was
> not declared. Should it be static?
> drivers/i2c/busses/i2c-qup.c:1243:50: warning: dubious: !x & !y
>     SMATCH
> drivers/i2c/busses/i2c-qup.c:165 qup_sg_set_buf warn: unused return: s =
> sg_next()
> drivers/i2c/busses/i2c-qup.c:165 qup_sg_set_buf warn: unused return: s =
> sg_next()
> drivers/i2c/busses/i2c-qup.c:1243 qup_i2c_xfer_v2() warn: add some
> parenthesis here?
>     CPPCHECK
> drivers/i2c/busses/i2c-qup.c:1243: style: Boolean result is used in
bitwise
> operation. Clarify expression with parentheses.
>     SPATCH
> drivers/i2c/busses/i2c-qup.c:1380:2-13: WARNING: Assignment of bool to 0/1
> drivers/i2c/busses/i2c-qup.c:1481:1-13: WARNING: Assignment of bool to 0/1
>   CC      drivers/i2c/busses/i2c-qup.o
> drivers/i2c/busses/i2c-qup.c:555:6: warning: no previous prototype for
> 'qup_sg_set_buf' [-Wmissing-prototypes]  void qup_sg_set_buf(struct
> scatterlist *sg, void *buf, struct qup_i2c_tag *tg,
> 
> Can you fix them and resend??

    Sorry on this , will resend this patch.

Regards,
 Sricharan