[PATCH v6 2/3] Documentation: mailbox: Add APM X-Gene SLIMpro mailbox dts documentation

From: Duc Dang
Date: Fri Feb 12 2016 - 22:46:45 EST


This adds the APM X-Gene SLIMpro mailbox device tree
node documentation.

Signed-off-by: Feng Kan <fkan@xxxxxxx>
Signed-off-by: Duc Dang <dhdang@xxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
Changes since v5:
- None

Changes since v4:
- Rebase over v4.5-rc1
- Fix number of total interrupts in
introduction text
- Change node name to mailbox@10540000

Changes since v3:
- Rebase over v4.4
- Change number of mailbox IRQs to 8
- Fix white spaces, typos.

.../bindings/mailbox/xgene-slimpro-mailbox.txt | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt
new file mode 100644
index 0000000..e46451b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt
@@ -0,0 +1,35 @@
+The APM X-Gene SLIMpro mailbox is used to communicate messages between
+the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple
+interrupt based door bell mechanism and can exchange simple messages using the
+internal registers.
+
+There are total of 8 interrupts in this mailbox. Each used for an individual
+door bell (or mailbox channel).
+
+Required properties:
+- compatible: Should be as "apm,xgene-slimpro-mbox".
+
+- reg: Contains the mailbox register address range.
+
+- interrupts: 8 interrupts must be from 0 to 7, interrupt 0 define the
+ the interrupt for mailbox channel 0 and interrupt 1 for
+ mailbox channel 1 and so likewise for the reminder.
+
+- #mbox-cells: only one to specify the mailbox channel number.
+
+Example:
+
+Mailbox Node:
+ mailbox: mailbox@10540000 {
+ compatible = "apm,xgene-slimpro-mbox";
+ reg = <0x0 0x10540000 0x0 0xa000>;
+ #mbox-cells = <1>;
+ interrupts = <0x0 0x0 0x4>,
+ <0x0 0x1 0x4>,
+ <0x0 0x2 0x4>,
+ <0x0 0x3 0x4>,
+ <0x0 0x4 0x4>,
+ <0x0 0x5 0x4>,
+ <0x0 0x6 0x4>,
+ <0x0 0x7 0x4>,
+ };
--
1.9.1