[PATCH 2/6] Documentation: bindings: document the Alpine MSIX driver

From: Antoine Tenart
Date: Mon Feb 08 2016 - 04:18:13 EST


Following the addition of the Alpine MSIX driver, this patch adds the
corresponding bindings documentation.

Signed-off-by: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Tsahee Zidenberg <tsahee@xxxxxxxxxxxxxxxxx>
---
.../interrupt-controller/al,alpine-msix.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
new file mode 100644
index 000000000000..a77d5a76e8d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
@@ -0,0 +1,22 @@
+Alpine MSIX controller
+
+Required properties:
+
+- compatible: should be "al,alpine-msix"
+- reg: physical base address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- msi-controller: identifies the node as an PCI Message Signaled Interrupt
+ controller
+- al,msi-base-spi: SPI base of the MSI frame
+- al,msi-num-spis: number of SPIs assigned to the MSI frame
+
+Example:
+
+msix: msix {
+ compatible = "al,alpine-msix";
+ reg = <0x0 0xfbe00000 0x0 0x100000>;
+ interrupt-controller;
+ msi-controller;
+ al,msi-base-spi = <160>;
+ al,msi-num-spis = <160>;
+};
--
2.7.0