Re: [PATCH V2] powerpc/mm: Fix Multi hit ERAT cause by recent THP update

From: Kirill A. Shutemov
Date: Mon Feb 08 2016 - 02:52:55 EST


On Mon, Feb 08, 2016 at 11:44:22AM +0530, Aneesh Kumar K.V wrote:
> With ppc64 we use the deposited pgtable_t to store the hash pte slot
> information. We should not withdraw the deposited pgtable_t without
> marking the pmd none. This ensure that low level hash fault handling
> will skip this huge pte and we will handle them at upper levels.
>
> Recent change to pmd splitting changed the above in order to handle the
> race between pmd split and exit_mmap. The race is explained below.
>
> Consider following race:
>
> CPU0 CPU1
> shrink_page_list()
> add_to_swap()
> split_huge_page_to_list()
> __split_huge_pmd_locked()
> pmdp_huge_clear_flush_notify()
> // pmd_none() == true
> exit_mmap()
> unmap_vmas()
> zap_pmd_range()
> // no action on pmd since pmd_none() == true
> pmd_populate()
>
> As result the THP will not be freed. The leak is detected by check_mm():
>
> BUG: Bad rss-counter state mm:ffff880058d2e580 idx:1 val:512
>
> The above required us to not mark pmd none during a pmd split.
>
> The fix for ppc is to clear the huge pte of _PAGE_USER, so that low
> level fault handling code skip this pte. At higher level we do take ptl
> lock. That should serialze us against the pmd split. Once the lock is
> acquired we do check the pmd again using pmd_same. That should always
> return false for us and hence we should retry the access.

I guess it worth mention that this serialization against ptl happens in
huge_pmd_set_accessed(), if I didn't miss anything.

>
> Also make sure we wait for irq disable section in other cpus to finish
> before flipping a huge pte entry with a regular pmd entry. Code paths
> like find_linux_pte_or_hugepte depend on irq disable to get
> a stable pte_t pointer. A parallel thp split need to make sure we
> don't convert a pmd pte to a regular pmd entry without waiting for the
> irq disable section to finish.
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@xxxxxxxxxxxxxxxxxx>
> ---
> arch/powerpc/include/asm/book3s/64/pgtable.h | 4 ++++
> arch/powerpc/mm/pgtable_64.c | 35 +++++++++++++++++++++++++++-
> include/asm-generic/pgtable.h | 8 +++++++
> mm/huge_memory.c | 1 +
> 4 files changed, 47 insertions(+), 1 deletion(-)
>
> diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
> index 8d1c41d28318..0415856941e0 100644
> --- a/arch/powerpc/include/asm/book3s/64/pgtable.h
> +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
> @@ -281,6 +281,10 @@ extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
> extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
> pmd_t *pmdp);
>
> +#define __HAVE_ARCH_PMDP_HUGE_SPLITTING_FLUSH
> +extern void pmdp_huge_splitting_flush(struct vm_area_struct *vma,
> + unsigned long address, pmd_t *pmdp);
> +
> #define pmd_move_must_withdraw pmd_move_must_withdraw
> struct spinlock;
> static inline int pmd_move_must_withdraw(struct spinlock *new_pmd_ptl,
> diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
> index 3124a20d0fab..e8214b7f2210 100644
> --- a/arch/powerpc/mm/pgtable_64.c
> +++ b/arch/powerpc/mm/pgtable_64.c
> @@ -646,6 +646,30 @@ pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
> return pgtable;
> }
>
> +void pmdp_huge_splitting_flush(struct vm_area_struct *vma,
> + unsigned long address, pmd_t *pmdp)
> +{
> + VM_BUG_ON(address & ~HPAGE_PMD_MASK);
> +
> +#ifdef CONFIG_DEBUG_VM
> + BUG_ON(REGION_ID(address) != USER_REGION_ID);
> +#endif
> + /*
> + * We can't mark the pmd none here, because that will cause a race
> + * against exit_mmap. We need to continue mark pmd TRANS HUGE, while
> + * we spilt, but at the same time we wan't rest of the ppc64 code
> + * not to insert hash pte on this, because we will be modifying
> + * the deposited pgtable in the caller of this function. Hence
> + * clear the _PAGE_USER so that we move the fault handling to
> + * higher level function and that will serialize against ptl.
> + * We need to flush existing hash pte entries here even though,
> + * the translation is still valid, because we will withdraw
> + * pgtable_t after this.
> + */
> + pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_USER, 0);
> +}
> +
> +
> /*
> * set a new huge pmd. We should not be called for updating
> * an existing pmd entry. That should go via pmd_hugepage_update.
> @@ -663,10 +687,19 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
> return set_pte_at(mm, addr, pmdp_ptep(pmdp), pmd_pte(pmd));
> }
>
> +/*
> + * We use this to invalidate a pmdp entry before switching from a
> + * hugepte to regular pmd entry.
> + */
> void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
> pmd_t *pmdp)
> {
> - pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0);
> + pmd_hugepage_update(vma->vm_mm, address, pmdp, ~0UL, 0);
> + /*
> + * This ensures that generic code that rely on IRQ disabling
> + * to prevent a parallel THP split work as expected.
> + */
> + kick_all_cpus_sync();
> }
>
> /*
> diff --git a/include/asm-generic/pgtable.h b/include/asm-generic/pgtable.h
> index 0b3c0d39ef75..93a0937652ec 100644
> --- a/include/asm-generic/pgtable.h
> +++ b/include/asm-generic/pgtable.h
> @@ -239,6 +239,14 @@ extern void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
> pmd_t *pmdp);
> #endif
>
> +#ifndef __HAVE_ARCH_PMDP_HUGE_SPLITTING_FLUSH
> +static inline void pmdp_huge_splitting_flush(struct vm_area_struct *vma,
> + unsigned long address, pmd_t *pmdp)
> +{
> +
> +}
> +#endif
> +
> #ifndef __HAVE_ARCH_PTE_SAME
> static inline int pte_same(pte_t pte_a, pte_t pte_b)
> {
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index 36c070167b71..b52d16a86e91 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2860,6 +2860,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
> young = pmd_young(*pmd);
> dirty = pmd_dirty(*pmd);
>
> + pmdp_huge_splitting_flush(vma, haddr, pmd);

Let's call it pmdp_huge_split_prepare().

"_flush" part is ppc-specific implementation detail and generic code
should not expect tlb to be flushed there.

Otherwise,

Acked-by: Kirill A. Shutemov <kirill.shutemov@xxxxxxxxxxxxxxx>

> pgtable = pgtable_trans_huge_withdraw(mm, pmd);
> pmd_populate(mm, &_pmd, pgtable);
>
> --
> 2.5.0
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@xxxxxxxxxx For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@xxxxxxxxx";> email@xxxxxxxxx </a>

--
Kirill A. Shutemov