[PATCH v15 3/6] ARM: socfpga: add bindings document for fpga bridge drivers

From: atull
Date: Wed Jan 20 2016 - 14:26:14 EST


From: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>

Add bindings documentation for Altera SOCFPGA bridges:
* fpga2sdram
* fpga2hps
* hps2fpga
* lwhps2fpga

Signed-off-by: Alan Tull <atull@xxxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Matthew Gerlach <mgerlach@xxxxxxxxxx>
Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxxxxxxxxxxxxx>
---
v2: separate into 2 documents for the 2 drivers
v12: bump version to line up with simple-fpga-bus version
remove Linux specific notes such as references to sysfs
move non-DT specific documentation elsewhere
remove bindings that would have been used to pass configuration
clean up formatting
v13: Remove 'label' property
Change property from init-val to bridge-enable
Fix email address
v14: Add resets
Change order of bridges to put lw bridge (controlling bridge) first
v15: No change in this patch for v15 of this patch set
---
.../bindings/fpga/altera-fpga2sdram-bridge.txt | 15 +++++++
.../bindings/fpga/altera-hps2fpga-bridge.txt | 43 ++++++++++++++++++++
2 files changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
create mode 100644 Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt

diff --git a/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
new file mode 100644
index 0000000..81e2f06
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-fpga2sdram-bridge.txt
@@ -0,0 +1,15 @@
+Altera FPGA To SDRAM Bridge Driver
+
+Required properties:
+- compatible : Should contain "altr,socfpga-fpga2sdram-bridge"
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup
+ 1 if driver should enable bridge at startup
+ Default is to leave bridge in current state.
+
+Example:
+ fpga2sdram_br: fpgabridge@3 {
+ compatible = "altr,socfpga-fpga2sdram-bridge";
+ bridge-enable = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
new file mode 100644
index 0000000..16db3b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/altera-hps2fpga-bridge.txt
@@ -0,0 +1,43 @@
+Altera FPGA/HPS Bridge Driver
+
+Required properties:
+- compatible : Should contain one of:
+ "altr,socfpga-lwhps2fpga-bridge",
+ "altr,socfpga-hps2fpga-bridge", or
+ "altr,socfpga-fpga2hps-bridge"
+- reset-names : Should contain one of:
+ "lwhps2fpga",
+ "hps2fpga", or
+ "fpga2hps"
+- resets : Phandle and reset specifier for the reset listed in
+ reset-names
+- clocks : Clocks used by this module.
+
+Optional properties:
+- bridge-enable : 0 if driver should disable bridge at startup.
+ 1 if driver should enable bridge at startup.
+ Default is to leave bridge in its current state.
+
+Example:
+ hps_fpgabridge0: fpgabridge@0 {
+ compatible = "altr,socfpga-lwhps2fpga-bridge";
+ resets = <&rst LWHPS2FPGA_RESET>;
+ reset-names = "lwhps2fpga";
+ clocks = <&l4_main_clk>;
+ bridge-enable = <0>;
+ };
+
+ hps_fpgabridge1: fpgabridge@1 {
+ compatible = "altr,socfpga-hps2fpga-bridge";
+ resets = <&rst HPS2FPGA_RESET>;
+ reset-names = "hps2fpga";
+ clocks = <&l4_main_clk>;
+ bridge-enable = <1>;
+ };
+
+ hps_fpgabridge2: fpgabridge@2 {
+ compatible = "altr,socfpga-fpga2hps-bridge";
+ resets = <&rst FPGA2HPS_RESET>;
+ reset-names = "fpga2hps";
+ clocks = <&l4_main_clk>;
+ };
--
1.7.9.5