Re: [PATCH v2 2/4] power: reset: add reboot mode driver

[Andy Yan]

Hi John:

On 2016å01æ16æ 04:27, John Stultz wrote:
> On Tue, Jan 12, 2016 at 3:31 AM, Andy Yan <andy.yan@xxxxxxxxxxxxxx> wrote:
> > This driver parse the reboot commands like "reboot loader"
> > and "reboot recovery" to get a boot mode described in the
> > device tree , then call the write interfae to store the boot
> > mode in some persistent storage  like special register or ram,
> > which can be read by the bootloader after system reboot, then
> > the bootloader can take different action according to the mode
> > stored.
> >
> > This is commonly used on Android based devices, which in order
> > to reboot the device into fastboot or recovery mode.
> >
> > Signed-off-by: Andy Yan <andy.yan@xxxxxxxxxxxxxx>
>
> Hey Andy!
>    Thanks for keeping this work going! I've just successfully reworked
> my Nexus7 tree to use your implementation (using the syscon version,
> setting up a syscon for IMEM as Bjorn had requested earlier).
>
> All is working well so far!
>
> The one thing I was working on supporting with my own version that
> seems to be missing here are for devices that use string based codes,
> rather then magic numbers.
>
> This was mostly a theoretical issue. I think the Galaxy Nexus used it,
> and when I was looking at some of the HTC devices, they support a text
> based reason along with the magic code, but at least in some
> implementations the text mode isn't used, so I suspect there its just
> for extra debugging.  So this may not be critical to solve until
> someone tries to add support for such a device.
>
> Anyway, I'm going to look at porting this to the HiKey board next
> (which just uses reserved ram, not syscon), so I'll try to do a an
> SRAM driver implementaiton to see how that goes.
>
> thanks!
> -john

 Very glad to hear news from you. And welcome your SRAM based driver 
implementation.