[PATCH net-next 05/10] ARM: mvebu: enable buffer manager support on Armada 38x boards

From: Gregory CLEMENT
Date: Tue Jan 12 2016 - 14:13:32 EST


From: Marcin Wojtas <mw@xxxxxxxxxxxx>

Since mvneta driver supports using hardware buffer management (BM), in
order to use it, board files have to be adjusted accordingly. This commit
enables BM on:
* A385-DB-AP - each port has its own pool for long and common pool for
short packets,
* A388-DB - to each port unique 'short' and 'long' pools are mapped,
* A388-GP - same as above.

Moreover appropriate entry is added to 'soc' node ranges, as well as "okay"
status for 'bm' and 'bm-bppi' (internal SRAM) nodes.

Signed-off-by: Marcin Wojtas <mw@xxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-385-db-ap.dts | 20 +++++++++++++++++++-
arch/arm/boot/dts/armada-388-db.dts | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-388-gp.dts | 17 ++++++++++++++++-
3 files changed, 51 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index acd5b1519edb..5f9451be21ff 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -61,7 +61,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;

internal-regs {
spi1: spi@10680 {
@@ -138,12 +139,18 @@
status = "okay";
phy = <&phy2>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <1>;
+ bm,pool-short = <3>;
};

ethernet@34000 {
status = "okay";
phy = <&phy1>;
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};

ethernet@70000 {
@@ -157,6 +164,13 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <3>;
+ };
+
+ bm@c8000 {
+ status = "okay";
};

nfc: flash@d0000 {
@@ -178,6 +192,10 @@
};
};

+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";

diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index ff47af57f091..ea93ed727030 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -66,7 +66,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;

internal-regs {
spi@10600 {
@@ -99,6 +100,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};

usb@58000 {
@@ -109,6 +113,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
};

mdio@72004 {
@@ -129,6 +136,10 @@
status = "okay";
};

+ bm@c8000 {
+ status = "okay";
+ };
+
flash@d0000 {
status = "okay";
num-cs = <1>;
@@ -169,6 +180,10 @@
};
};

+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
/*
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index a633be3defda..0a3bd7fba488 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -60,7 +60,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;

internal-regs {
spi@10600 {
@@ -133,6 +134,9 @@
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
};

/* CON4 */
@@ -152,6 +156,9 @@
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
};


@@ -186,6 +193,10 @@
};
};

+ bm@c8000 {
+ status = "okay";
+ };
+
sata@e0000 {
pinctrl-names = "default";
pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@@ -240,6 +251,10 @@
};
};

+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
/*
--
2.5.0