Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel

From: Julian Margetson
Date: Fri Dec 18 2015 - 17:50:43 EST

Next message: Brian Norris: "Re: [PATCH v2] mtd: spi-nor: fsl-quadspi: add big-endian support"
Previous message: Andrew Morton: "Re: [PATCH] memory-hotplug: don't BUG() in register_memory_resource()"
In reply to: Måns Rullgård: "Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel"
Next in thread: Måns Rullgård: "Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 12/18/2015 6:33 PM, Måns Rullgård wrote:

Julian Margetson <runaway@xxxxxxxx> writes:

On 12/18/2015 1:18 PM, Måns Rullgård wrote:

Julian Margetson <runaway@xxxxxxxx> writes:

On 12/18/2015 8:49 AM, Måns Rullgård wrote:

Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> writes:

[ 5.206125] Unable to handle kernel paging request for data at
address 0x00000000
[ 5.228546] Faulting instruction address: 0xc043a2c8
[ 5.248577] Vector: 300 (Data Access) at [eddafae0]
[ 5.268658] pc: c043a2c8: sata_dwc_qc_issue+0xb8/0x204

Well, that's not good. Can you translate that address to a line of
code?

Besides that, can you enable DYNAMIC_DEBUG in the config and append
'dw_dmac_core.dyndbg dw_dmac.dyndbg' to the kernel cmdline?

Enabling debug messages in the sata_dwc driver might also be informative.

Changed the sata-dwc to a module .

[ 18.475140] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 18.535698] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL

That's strange. The only way that can happen is if
dmaengine_prep_slave_sg() return NULL, and that really shouldn't be
happening. Did you turn on debug messages in dw_dma? You can enable
some extra debug messages by adding "#define VERBOSE_DEBUG" at the top
of drivers/dma/dw/core.c

[ 17.526173] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 17.600124] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 17.662978] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL

Could you post the entire kernel log? There might be important
information before the errors start.

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.12.18 15:01:48 =~=~=~=~=~=~=~=~=~=~=~=
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.4.0-rc5-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #8 PREEMPT Fri Dec 18 13:36:34 AST 2015
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200 console=tty0 dw_dmac_core.dyndbg dw_dmac.dyndbg
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2068868K/2097152K available (6732K kernel code, 332K rwdata, 3232K rodata, 236K init, 368K bss, 28284K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000013] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000023] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000144] Console: colour dummy device 80x25
[ 0.000712] console [tty0] enabled
[ 0.000749] pid_max: default: 32768 minimum: 301
[ 0.000859] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000886] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004722] devtmpfs: initialized
[ 0.007452] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.007891] xor: measuring software checksum speed
[ 0.017379] 8regs : 856.000 MB/sec
[ 0.027386] 8regs_prefetch: 784.000 MB/sec
[ 0.037420] 32regs : 1120.000 MB/sec
[ 0.047456] 32regs_prefetch: 996.000 MB/sec
[ 0.047476] xor: using function: 32regs (1120.000 MB/sec)
[ 0.047525] prandom: seed boundary self test passed
[ 0.049987] prandom: 100 self tests passed
[ 0.050597] NET: Registered protocol family 16
[ 0.053576] cpuidle: using governor ladder
[ 0.056611] cpuidle: using governor menu
[ 0.057024] 256k L2-cache enabled
[ 0.057143] PCIE0: Port disabled via device-tree
[ 0.057205] PCIE1: Checking link...
[ 0.057222] PCIE1: Device detected, waiting for link...
[ 0.057241] PCIE1: link is up !
[ 0.159444] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.159494] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.159530] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.159562] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.159600] 4xx PCI DMA offset set to 0x00000000
[ 0.159618] 4xx PCI DMA window base to 0x0000000000000000
[ 0.159637] DMA window size 0x0000000080000000
[ 0.159672] PCIE1: successfully set as root-complex
[ 0.159748] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.159777] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.159812] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.159843] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.159872] 4xx PCI DMA offset set to 0x00000000
[ 0.159890] 4xx PCI DMA window base to 0x0000000000000000
[ 0.159908] DMA window size 0x0000000080000000
[ 0.160395] PCI: Probing PCI hardware
[ 0.160514] PCI host bridge to bus 0000:80
[ 0.160544] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.160582] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.160619] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.160658] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.160794] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.161682] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.161912] PCI host bridge to bus 0001:00
[ 0.161939] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.161965] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.162018] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.162056] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.162684] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.162726] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.162752] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.162783] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.162826] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.162865] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.162898] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.162937] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.162965] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.162988] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.163035] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.163062] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.163166] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.163196] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.163225] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.163257] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.163284] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.163309] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.163335] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.163360] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.163386] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.190310] raid6: int32x1 gen() 300 MB/s
[ 0.207464] raid6: int32x1 xor() 173 MB/s
[ 0.224490] raid6: int32x2 gen() 433 MB/s
[ 0.241539] raid6: int32x2 xor() 240 MB/s
[ 0.258633] raid6: int32x4 gen() 476 MB/s
[ 0.275711] raid6: int32x4 xor() 267 MB/s
[ 0.292768] raid6: int32x8 gen() 234 MB/s
[ 0.309940] raid6: int32x8 xor() 218 MB/s
[ 0.309964] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.309983] raid6: .... xor() 267 MB/s, rmw enabled
[ 0.310002] raid6: using intx1 recovery algorithm
[ 0.310317] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.310361] vgaarb: loaded
[ 0.310376] vgaarb: bridge control possible 0000:81:00.0
[ 0.310653] SCSI subsystem initialized
[ 0.311053] usbcore: registered new interface driver usbfs
[ 0.311125] usbcore: registered new interface driver hub
[ 0.311190] usbcore: registered new device driver usb
[ 0.311302] pps_core: LinuxPPS API ver. 1 registered
[ 0.311322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.311373] PTP clock support registered
[ 0.311533] EDAC MC: Ver: 3.0.0
[ 0.311933] Advanced Linux Sound Architecture Driver Initialized.
[ 0.331845] DMA-API: preallocated 65536 debug entries
[ 0.331887] DMA-API: debugging enabled by kernel config
[ 0.331945] clocksource: Switched to clocksource timebase
[ 0.338562] NET: Registered protocol family 2
[ 0.339176] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.339296] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.339621] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.339755] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.339837] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.340198] NET: Registered protocol family 1
[ 0.340535] RPC: Registered named UNIX socket transport module.
[ 0.340566] RPC: Registered udp transport module.
[ 0.340584] RPC: Registered tcp transport module.
[ 0.340603] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.341367] Could not remap bcsr
[ 0.344558] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.347392] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.357570] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.358147] fuse init (API version 7.23)
[ 0.362347] async_tx: api initialized (async)
[ 0.362472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.362510] io scheduler noop registered
[ 0.362664] io scheduler cfq registered (default)
[ 0.364655] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.364684] crc32: self tests passed, processed 225944 bytes in 891693 nsec
[ 0.365718] crc32c: CRC_LE_BITS = 64
[ 0.365740] crc32c: self tests passed, processed 225944 bytes in 446640 nsec
[ 0.432172] crc32_combine: 8373 self tests passed
[ 0.498793] crc32c_combine: 8373 self tests passed
[ 0.498861] glob: 64 self-tests passed, 0 failed
[ 0.537122] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.537920] console [ttyS0] disabled
[ 0.558119] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.492770] console [ttyS0] enabled
[ 1.516892] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.526768] console [ttyS0] disabled
[ 0.000000] Using Canyonlands machine description
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 4.4.0-rc5-Sam460ex (root@julian-VirtualBox) (gcc version 4.8.2 (Ubuntu 4.8.2-16ubuntu3) ) #8 PREEMPT Fri Dec 18 13:36:34 AST 2015
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff]
[ 0.000000] Normal empty
[ 0.000000] HighMem [mem 0x0000000030000000-0x000000007fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] MMU: Allocated 1088 bytes of context maps for 255 contexts
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522752
[ 0.000000] Kernel command line: root=/dev/sda8 console=ttyS0,115200 console=tty0 dw_dmac_core.dyndbg dw_dmac.dyndbg
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Sorting __ex_table...
[ 0.000000] Memory: 2068868K/2097152K available (6732K kernel code, 332K rwdata, 3232K rodata, 236K init, 368K bss, 28284K reserved, 0K cma-reserved, 1310720K highmem)
[ 0.000000] Kernel virtual memory layout:
[ 0.000000] * 0xfffcf000..0xfffff000 : fixmap
[ 0.000000] * 0xffc00000..0xffe00000 : highmem PTEs
[ 0.000000] * 0xffa00000..0xffc00000 : consistent mem
[ 0.000000] * 0xffa00000..0xffa00000 : early ioremap
[ 0.000000] * 0xf1000000..0xffa00000 : vmalloc & ioremap
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] NR_IRQS:512 nr_irqs:512 16
[ 0.000000] UIC0 (32 IRQ sources) at DCR 0xc0
[ 0.000000] UIC1 (32 IRQ sources) at DCR 0xd0
[ 0.000000] UIC2 (32 IRQ sources) at DCR 0xe0
[ 0.000000] UIC3 (32 IRQ sources) at DCR 0xf0
[ 0.000013] clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x10a60dda894, max_idle_ns: 440795207041 ns
[ 0.000023] clocksource: timebase mult[dda520] shift[24] registered
[ 0.000144] Console: colour dummy device 80x25
[ 0.000712] console [tty0] enabled
[ 0.000749] pid_max: default: 32768 minimum: 301
[ 0.000859] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000886] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004722] devtmpfs: initialized
[ 0.007452] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.007891] xor: measuring software checksum speed
[ 0.017379] 8regs : 856.000 MB/sec
[ 0.027386] 8regs_prefetch: 784.000 MB/sec
[ 0.037420] 32regs : 1120.000 MB/sec
[ 0.047456] 32regs_prefetch: 996.000 MB/sec
[ 0.047476] xor: using function: 32regs (1120.000 MB/sec)
[ 0.047525] prandom: seed boundary self test passed
[ 0.049987] prandom: 100 self tests passed
[ 0.050597] NET: Registered protocol family 16
[ 0.053576] cpuidle: using governor ladder
[ 0.056611] cpuidle: using governor menu
[ 0.057024] 256k L2-cache enabled
[ 0.057143] PCIE0: Port disabled via device-tree
[ 0.057205] PCIE1: Checking link...
[ 0.057222] PCIE1: Device detected, waiting for link...
[ 0.057241] PCIE1: link is up !
[ 0.159444] PCI host bridge /plb/pciex@d20000000 (primary) ranges:
[ 0.159494] MEM 0x0000000e80000000..0x0000000effffffff -> 0x0000000080000000
[ 0.159530] MEM 0x0000000f00100000..0x0000000f001fffff -> 0x0000000000000000
[ 0.159562] IO 0x0000000f80010000..0x0000000f8001ffff -> 0x0000000000000000
[ 0.159600] 4xx PCI DMA offset set to 0x00000000
[ 0.159618] 4xx PCI DMA window base to 0x0000000000000000
[ 0.159637] DMA window size 0x0000000080000000
[ 0.159672] PCIE1: successfully set as root-complex
[ 0.159748] PCI host bridge /plb/pci@c0ec00000 (primary) ranges:
[ 0.159777] MEM 0x0000000d80000000..0x0000000dffffffff -> 0x0000000080000000
[ 0.159812] MEM 0x0000000c0ee00000..0x0000000c0eefffff -> 0x0000000000000000
[ 0.159843] IO 0x0000000c08000000..0x0000000c0800ffff -> 0x0000000000000000
[ 0.159872] 4xx PCI DMA offset set to 0x00000000
[ 0.159890] 4xx PCI DMA window base to 0x0000000000000000
[ 0.159908] DMA window size 0x0000000080000000
[ 0.160395] PCI: Probing PCI hardware
[ 0.160514] PCI host bridge to bus 0000:80
[ 0.160544] pci_bus 0000:80: root bus resource [io 0xfffe0000-0xfffeffff] (bus address [0x0000-0xffff])
[ 0.160582] pci_bus 0000:80: root bus resource [mem 0xe80000000-0xeffffffff] (bus address [0x80000000-0xffffffff])
[ 0.160619] pci_bus 0000:80: root bus resource [mem 0xf00100000-0xf001fffff] (bus address [0x00000000-0x000fffff])
[ 0.160658] pci_bus 0000:80: root bus resource [bus 80-ff]
[ 0.160794] PCI: Hiding 4xx host bridge resources 0000:80:00.0
[ 0.161682] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.161912] PCI host bridge to bus 0001:00
[ 0.161939] pci_bus 0001:00: root bus resource [io 0x0000-0xffff]
[ 0.161965] pci_bus 0001:00: root bus resource [mem 0xd80000000-0xdffffffff] (bus address [0x80000000-0xffffffff])
[ 0.162018] pci_bus 0001:00: root bus resource [mem 0xc0ee00000-0xc0eefffff] (bus address [0x00000000-0x000fffff])
[ 0.162056] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 0.162684] pci 0000:80:00.0: BAR 9: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.162726] pci 0000:80:00.0: BAR 8: assigned [mem 0xe90000000-0xe900fffff]
[ 0.162752] pci 0000:80:00.0: BAR 7: assigned [io 0xfffe1000-0xfffe1fff]
[ 0.162783] pci 0000:81:00.0: BAR 0: assigned [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.162826] pci 0000:81:00.0: BAR 2: assigned [mem 0xe90000000-0xe9003ffff 64bit]
[ 0.162865] pci 0000:81:00.0: BAR 6: assigned [mem 0xe90040000-0xe9005ffff pref]
[ 0.162898] pci 0000:81:00.1: BAR 0: assigned [mem 0xe90060000-0xe90063fff 64bit]
[ 0.162937] pci 0000:81:00.0: BAR 4: assigned [io 0xfffe1000-0xfffe10ff]
[ 0.162965] pci 0000:80:00.0: PCI bridge to [bus 81-bf]
[ 0.162988] pci 0000:80:00.0: bridge window [io 0xfffe1000-0xfffe1fff]
[ 0.163035] pci 0000:80:00.0: bridge window [mem 0xe90000000-0xe900fffff]
[ 0.163062] pci 0000:80:00.0: bridge window [mem 0xe80000000-0xe8fffffff 64bit pref]
[ 0.163166] pci 0001:00:06.0: BAR 0: assigned [mem 0xd80000000-0xd83ffffff]
[ 0.163196] pci 0001:00:06.0: BAR 1: assigned [mem 0xd84000000-0xd841fffff]
[ 0.163225] pci 0001:00:04.0: BAR 6: assigned [mem 0xd84200000-0xd8427ffff pref]
[ 0.163257] pci 0001:00:04.0: BAR 5: assigned [mem 0xd84280000-0xd842801ff]
[ 0.163284] pci 0001:00:04.0: BAR 4: assigned [io 0x1000-0x100f]
[ 0.163309] pci 0001:00:04.0: BAR 0: assigned [io 0x1010-0x1017]
[ 0.163335] pci 0001:00:04.0: BAR 2: assigned [io 0x1018-0x101f]
[ 0.163360] pci 0001:00:04.0: BAR 1: assigned [io 0x1020-0x1023]
[ 0.163386] pci 0001:00:04.0: BAR 3: assigned [io 0x1024-0x1027]
[ 0.190310] raid6: int32x1 gen() 300 MB/s
[ 0.207464] raid6: int32x1 xor() 173 MB/s
[ 0.224490] raid6: int32x2 gen() 433 MB/s
[ 0.241539] raid6: int32x2 xor() 240 MB/s
[ 0.258633] raid6: int32x4 gen() 476 MB/s
[ 0.275711] raid6: int32x4 xor() 267 MB/s
[ 0.292768] raid6: int32x8 gen() 234 MB/s
[ 0.309940] raid6: int32x8 xor() 218 MB/s
[ 0.309964] raid6: using algorithm int32x4 gen() 476 MB/s
[ 0.309983] raid6: .... xor() 267 MB/s, rmw enabled
[ 0.310002] raid6: using intx1 recovery algorithm
[ 0.310317] vgaarb: device added: PCI:0000:81:00.0,decodes=io+mem,owns=none,locks=none
[ 0.310361] vgaarb: loaded
[ 0.310376] vgaarb: bridge control possible 0000:81:00.0
[ 0.310653] SCSI subsystem initialized
[ 0.311053] usbcore: registered new interface driver usbfs
[ 0.311125] usbcore: registered new interface driver hub
[ 0.311190] usbcore: registered new device driver usb
[ 0.311302] pps_core: LinuxPPS API ver. 1 registered
[ 0.311322] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.311373] PTP clock support registered
[ 0.311533] EDAC MC: Ver: 3.0.0
[ 0.311933] Advanced Linux Sound Architecture Driver Initialized.
[ 0.331845] DMA-API: preallocated 65536 debug entries
[ 0.331887] DMA-API: debugging enabled by kernel config
[ 0.331945] clocksource: Switched to clocksource timebase
[ 0.338562] NET: Registered protocol family 2
[ 0.339176] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.339296] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
[ 0.339621] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.339755] UDP hash table entries: 512 (order: 2, 24576 bytes)
[ 0.339837] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
[ 0.340198] NET: Registered protocol family 1
[ 0.340535] RPC: Registered named UNIX socket transport module.
[ 0.340566] RPC: Registered udp transport module.
[ 0.340584] RPC: Registered tcp transport module.
[ 0.340603] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.341367] Could not remap bcsr
[ 0.344558] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 0.347392] futex hash table entries: 256 (order: 0, 7168 bytes)
[ 0.357570] ntfs: driver 2.1.32 [Flags: R/W].
[ 0.358147] fuse init (API version 7.23)
[ 0.362347] async_tx: api initialized (async)
[ 0.362472] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.362510] io scheduler noop registered
[ 0.362664] io scheduler cfq registered (default)
[ 0.364655] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[ 0.364684] crc32: self tests passed, processed 225944 bytes in 891693 nsec
[ 0.365718] crc32c: CRC_LE_BITS = 64
[ 0.365740] crc32c: self tests passed, processed 225944 bytes in 446640 nsec
[ 0.432172] crc32_combine: 8373 self tests passed
[ 0.498793] crc32c_combine: 8373 self tests passed
[ 0.498861] glob: 64 self-tests passed, 0 failed
[ 0.537122] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.537920] console [ttyS0] disabled
[ 0.558119] serial8250.0: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a U6_16550A
[ 1.492770] console [ttyS0] enabled
[ 1.516892] serial8250.0: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a U6_16550A
[ 1.526768] console [ttyS0] disabled
[ 1.530457] 4ef600300.serial: ttyS0 at MMIO 0x4ef600300 (irq = 22, base_baud = 691200) is a 16550
[ 2.489950] console [ttyS0] enabled
[ 2.494121] 4ef600400.serial: ttyS1 at MMIO 0x4ef600400 (irq = 23, base_baud = 691200) is a 16550
[ 2.503488] Generic non-volatile memory driver v1.1
[ 2.508674] [drm] Initialized drm 1.1.0 20060810
[ 2.513406] [drm] radeon kernel modesetting enabled.
[ 2.519148] [drm] initializing kernel modesetting (VERDE 0x1002:0x683F 0x1545:0x7750).
[ 2.527166] [drm] register mmio base: 0xe90000000
[ 2.531913] [drm] register mmio size: 262144
[ 2.867989] ATOM BIOS: C44501
[ 2.871326] radeon 0000:81:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 2.880256] radeon 0000:81:00.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
[ 2.887945] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 2.892844] [drm] RAM width 128bits DDR
[ 2.896882] [TTM] Zone kernel: Available graphics memory: 379074 kiB
[ 2.903371] [TTM] Zone highmem: Available graphics memory: 1034434 kiB
[ 2.909921] [TTM] Initializing pool allocator
[ 2.914384] [drm] radeon: 1024M of VRAM memory ready
[ 2.919392] [drm] radeon: 2048M of GTT memory ready.
[ 2.924436] [drm] Loading verde Microcode
[ 2.928504] [drm] Internal thermal controller with fan control
[ 2.934582] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 2.941131] [drm:radeon_pm_init] *ERROR* radeon: dpm initialization failed
[ 2.948228] radeon 0000:81:00.0: Direct firmware load for radeon/TAHITI_vce.bin failed with error -2
[ 2.957448] radeon 0000:81:00.0: radeon_vce: Can't load firmware "radeon/TAHITI_vce.bin"
[ 2.965622] [drm] GART: num cpu pages 524288, num gpu pages 524288
[ 2.982377] [drm] probing gen 2 caps for device aaa1:bed1 = 18cc41/0
[ 3.043979] [drm] PCIE GART of 2048M enabled (table at 0x0000000000277000).
[ 3.051334] radeon 0000:81:00.0: WB enabled
[ 3.055562] radeon 0000:81:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xedccec00
[ 3.065687] radeon 0000:81:00.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xedccec04
[ 3.075808] radeon 0000:81:00.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xedccec08
[ 3.085930] radeon 0000:81:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xedccec0c
[ 3.096051] radeon 0000:81:00.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xedccec10
[ 3.136587] radeon 0000:81:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xf5135a18
[ 3.146729] radeon 0000:81:00.0: VCE init error (-22).
[ 3.151902] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.158543] [drm] Driver supports precise vblank timestamp query.
[ 3.164662] radeon 0000:81:00.0: radeon: MSI limited to 32-bit
[ 3.170591] genirq: Setting trigger mode 3 for irq 45 failed (uic_set_irq_type+0x0/0x160)
[ 3.178860] radeon 0000:81:00.0: radeon: using MSI.
[ 3.183820] [drm] radeon: irq initialized.
[ 3.756528] [drm:r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x850C)=0xCAFEDEAD)
[ 3.765377] radeon 0000:81:00.0: disabling GPU acceleration
[ 3.973890] [drm] Radeon Display Connectors
[ 3.978173] [drm] Connector 0:
[ 3.981273] [drm] HDMI-A-1
[ 3.984180] [drm] HPD4
[ 3.986735] [drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[ 3.994153] [drm] Encoders:
[ 3.997141] [drm] DFP1: INTERNAL_UNIPHY2
[ 4.001429] [drm] Connector 1:
[ 4.004502] [drm] DVI-I-1
[ 4.007313] [drm] HPD2
[ 4.009868] [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[ 4.017287] [drm] Encoders:
[ 4.020273] [drm] DFP2: INTERNAL_UNIPHY
[ 4.024475] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.140753] [drm] fb mappable at 0x80678000
[ 4.144971] [drm] vram apper at 0x80000000
[ 4.149084] [drm] size 8294400
[ 4.152157] [drm] fb depth is 24
[ 4.155403] [drm] pitch is 7680
[ 4.246716] Console: switching to colour frame buffer device 240x67
[ 4.324952] radeon 0000:81:00.0: fb0: radeondrmfb frame buffer device
[ 4.333963] [drm] Initialized radeon 2.43.0 20080528 for 0000:81:00.0 on minor 0
[ 4.351179] brd: module loaded
[ 4.358887] loop: module loaded
[ 4.362608] sata_sil 0001:00:04.0: Applying R_ERR on DMA activate FIS errata fix
[ 4.371071] scsi host0: sata_sil
[ 4.374795] scsi host1: sata_sil
[ 4.378383] ata1: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd84280080 irq 21
[ 4.386132] ata2: SATA max UDMA/100 mmio m512@0xd84280000 tf 0xd842800c0 irq 21
[ 4.394503] PPC 4xx OCP EMAC driver, version 3.54
[ 4.400074] MAL v2 /plb/mcmal, 2 TX channels, 16 RX channels
[ 4.406281] ZMII /plb/opb/emac-zmii@ef600d00 initialized
[ 4.412024] RGMII /plb/opb/emac-rgmii@ef601500 initialized with MDIO support
[ 4.419598] TAH /plb/opb/emac-tah@ef601350 initialized
[ 4.425084] TAH /plb/opb/emac-tah@ef601450 initialized
[ 4.430804] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode
[ 4.438299] eth0: EMAC-0 /plb/opb/ethernet@ef600e00, MAC 00:50:c2:80:d5:c5
[ 4.445594] eth0: found Generic MII PHY (0x00)
[ 4.450488] /plb/opb/emac-rgmii@ef601500: input 1 in RGMII mode
[ 4.457926] eth1: EMAC-1 /plb/opb/ethernet@ef600f00, MAC 00:00:00:00:00:00
[ 4.465222] eth1: found Generic MII PHY (0x01)
[ 4.469988] PPP generic driver version 2.4.2
[ 4.474691] PPP BSD Compression module registered
[ 4.479694] PPP Deflate Compression module registered
[ 4.485052] NET: Registered protocol family 24
[ 4.489976] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.497060] ppc-of-ehci 4bffd0400.ehci: OF EHCI
[ 4.502045] ppc-of-ehci 4bffd0400.ehci: new USB bus registered, assigned bus number 1
[ 4.511029] ppc-of-ehci 4bffd0400.ehci: irq 31, io mem 0x4bffd0400
[ 4.522962] ppc-of-ehci 4bffd0400.ehci: USB 2.0 started, EHCI 1.00
[ 4.529708] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.536907] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.544552] usb usb1: Product: OF EHCI
[ 4.548527] usb usb1: Manufacturer: Linux 4.4.0-rc5-Sam460ex ehci_hcd
[ 4.555342] usb usb1: SerialNumber: PPC-OF USB
[ 4.560462] hub 1-0:1.0: USB hub found
[ 4.564529] hub 1-0:1.0: 1 port detected
[ 4.582979] ehci-pci: EHCI PCI platform driver
[ 4.601490] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.621863] ppc-of-ohci 4bffd0000.usb: OF OHCI
[ 4.640451] ppc-of-ohci 4bffd0000.usb: new USB bus registered, assigned bus number 2
[ 4.662481] ppc-of-ohci 4bffd0000.usb: irq 32, io mem 0x4bffd0000
[ 4.723972] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.751239] ata1.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 4.791949] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 4.840608] ata1.00: configured for UDMA/100
[ 4.883959] usb 1-1: new high-speed USB device number 2 using ppc-of-ehci
[ 4.908224] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 1D05 PQ: 0 ANSI: 5
[ 4.955702] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.976382] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.019198] sd 0:0:0:0: [sda] Write Protect is off
[ 5.059073] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.084111] usb 1-1: New USB device found, idVendor=0424, idProduct=2517
[ 5.125954] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.177048] hub 1-1:1.0: USB hub found
[ 5.197280] sda: RDSK (512) sda1 (DOS^G)(res 2 spb 1) sda2 (SFS^@)(res 2 spb 1) sda3 (SFS^@)(res 2 spb 1) sda4 (SFS^@)(res 2 spb 1) sda5 (SFS^@)(res 2 spb 1) sda6 (SFS^@)(res 2 spb 1) sda7 (NTFS)(res 2 spb 2) sda8 (EXT^C)(res 2 spb 1)
[ 5.252980] hub 1-1:1.0: 7 ports detected
[ 5.296596] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.335973] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.400084] ata2.00: ATAPI: ASUS DRW-24B3ST i, 1.00, max UDMA/100
[ 5.453069] ata2.00: configured for UDMA/100
[ 5.501886] scsi 1:0:0:0: CD-ROM ASUS DRW-24B3ST i 1.00 PQ: 0 ANSI: 5
[ 5.582155] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.608851] usb 1-1.1: new high-speed USB device number 3 using ppc-of-ehci
[ 5.657966] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.707980] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.744578] usb 1-1.1: New USB device found, idVendor=1a40, idProduct=0101
[ 5.791955] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.832730] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.857851] usb 1-1.1: Product: USB 2.0 Hub
[ 5.880460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.906573] usb usb2: Product: OF OHCI
[ 5.928909] hub 1-1.1:1.0: USB hub found
[ 5.951177] usb usb2: Manufacturer: Linux 4.4.0-rc5-Sam460ex ohci_hcd
[ 5.976138] usb usb2: SerialNumber: PPC-OF USB
[ 5.998871] hub 1-1.1:1.0: 4 ports detected
[ 6.021875] hub 2-0:1.0: USB hub found
[ 6.044028] hub 2-0:1.0: 1 port detected
[ 6.066815] ohci-pci: OHCI PCI platform driver
[ 6.089621] usbcore: registered new interface driver usblp
[ 6.113468] usbcore: registered new interface driver usb-storage
[ 6.137437] usbcore: registered new interface driver usbserial
[ 6.160923] usbcore: registered new interface driver usbserial_generic
[ 6.184999] usb 1-1.2: new low-speed USB device number 4 using ppc-of-ehci
[ 6.209562] usbserial: USB Serial support registered for generic
[ 6.233987] mousedev: PS/2 mouse device common for all mice
[ 6.257492] i2c /dev entries driver
[ 6.281089] rtc-m41t80 8-0068: rtc core: registered m41t80 as rtc0
[ 6.305988] ibm-iic 4ef600700.i2c: using standard (100 kHz) mode
[ 6.330107] ibm-iic 4ef600800.i2c: using standard (100 kHz) mode
[ 6.353975] md: linear personality registered for level -1
[ 6.377153] md: raid0 personality registered for level 0
[ 6.400156] md: raid1 personality registered for level 1
[ 6.422968] md: raid10 personality registered for level 10
[ 6.445791] usb 1-1.2: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 32
[ 6.474210] md: raid6 personality registered for level 6
[ 6.497297] md: raid5 personality registered for level 5
[ 6.520241] md: raid4 personality registered for level 4
[ 6.543174] usb 1-1.1.1: new full-speed USB device number 5 using ppc-of-ehci
[ 6.568576] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@xxxxxxxxxx
[ 6.595098] usb 1-1.2: New USB device found, idVendor=04f2, idProduct=0116
[ 6.620100] EDAC PPC4xx MC: v1.0.0
[ 6.641545] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.667187] EDAC PPC4xx MC: Reporting type: interrupt
[ 6.690532] usb 1-1.2: Product: USB Keyboard
[ 6.713123] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.736651] usb 1-1.2: Manufacturer: CHICONY
[ 6.759556] usbcore: registered new interface driver usbhid
[ 6.783586] usbhid: USB HID core driver
[ 6.806166] usbcore: registered new interface driver snd-usb-audio
[ 6.832176] usb 1-1.1.1: New USB device found, idVendor=0d8c, idProduct=000c
[ 6.857407] input: CHICONY USB Keyboard as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F2:0116.0001/input/input0
[ 6.888454] usbcore: registered new interface driver snd-ua101
[ 6.912864] usb 1-1.1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.939008] usbcore: registered new interface driver snd-usb-usx2y
[ 6.963843] usb 1-1.1.1: Product: C-Media USB Audio Device
[ 6.988341] ipip: IPv4 over IPv4 tunneling driver
[ 7.011395] Initializing XFRM netlink socket
[ 7.033097] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-PPC-OF USB-1.2/input0
[ 7.065191] NET: Registered protocol family 10
[ 7.089472] sit: IPv6 over IPv4 tunneling driver
[ 7.112706] NET: Registered protocol family 17
[ 7.134964] NET: Registered protocol family 15
[ 7.159397] Key type encrypted registered
[ 7.180695] usb 1-1.6: new full-speed USB device number 6 using ppc-of-ehci
[ 7.206888] rtc-m41t80 8-0068: setting system clock to 2015-12-18 19:01:48 UTC (1450465308)
[ 7.233094] ALSA device list:
[ 7.253284] No soundcards found.
[ 7.285428] input: C-Media USB Audio Device as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.3/0003:0D8C:000C.0002/input/input1
[ 7.321269] usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b
[ 7.346206] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.371782] hid-generic 0003:0D8C:000C.0002: input,hidraw1: USB HID v1.00 Device [C-Media USB Audio Device ] on usb-PPC-OF USB-1.1.1/input3
[ 7.403024] usb 1-1.6: Product: USB Receiver
[ 7.425636] usb 1-1.6: Manufacturer: Logitech
[ 7.448478] md: Waiting for all devices to be available before autodetect
[ 7.474174] md: If you don't use raid, use raid=noautodetect
[ 7.501598] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0003/input/input2
[ 7.584213] hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input0
[ 7.621847] input: Logitech USB Receiver as /devices/platform/plb/4bffd0400.ehci/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0004/input/input3
[ 7.705319] hid-generic 0003:046D:C52B.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input1
[ 7.743275] hid-generic 0003:046D:C52B.0005: hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-PPC-OF USB-1.6/input2
[ 7.776545] md: Autodetecting RAID arrays.
[ 7.801613] md: Scanned 0 and added 0 devices.
[ 7.827019] md: autorun ...
[ 7.850839] md: ... autorun DONE.
[ 7.900143] EXT4-fs (sda8): mounting ext3 file system using the ext4 subsystem
[ 7.936985] usb 1-1.7: new high-speed USB device number 7 using ppc-of-ehci
[ 7.975748] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 8.004885] VFS: Mounted root (ext3 filesystem) readonly on device 8:8.
[ 8.049631] devtmpfs: mounted
[ 8.074394] Freeing unused kernel memory: 236K (c09be000 - c09f9000)
[ 8.120616] usb 1-1.7: New USB device found, idVendor=0424, idProduct=2240
[ 8.149386] usb 1-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.178878] usb 1-1.7: Product: Ultra Fast Media
[ 8.205472] usb 1-1.7: Manufacturer: Generic
[ 8.231525] usb 1-1.7: SerialNumber: 000000225001
[ 8.259049] usb-storage 1-1.7:1.0: USB Mass Storage device detected
[ 8.287090] scsi host2: usb-storage 1-1.7:1.0
[ 8.645084] random: nonblocking pool is initialized
[ 9.303547] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 9.336787] scsi 2:0:0:0: Direct-Access Generic Ultra HS-COMBO 1.98 PQ: 0 ANSI: 0
[ 9.369339] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 9.398103] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.490619] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 9.531791] systemd[1]: Detected architecture ppc.
[ 9.655829] systemd[1]: Set hostname to <Sam460ex>.
[ 9.904905] systemd-fstab-generator[118]: Mount point is not a valid path, ignoring.
[ 10.690232] systemd[112]: /lib/systemd/system-generators/systemd-fstab-generator terminated by signal ABRT.
[ 11.065098] systemd[1]: Created slice User and Session Slice.
[ 11.116773] systemd[1]: Reached target Remote File Systems (Pre).
[ 11.167331] systemd[1]: Reached target Remote File Systems.
[ 11.217432] systemd[1]: Created slice System Slice.
[ 11.266919] systemd[1]: Listening on Syslog Socket.
[ 11.315273] systemd[1]: Reached target User and Group Name Lookups.
[ 11.454320] systemd[1]: Reached target Encrypted Volumes.
[ 11.504457] systemd[1]: Listening on udev Control Socket.
[ 11.554445] systemd[1]: Created slice system-getty.slice.
[ 11.604221] systemd[1]: Listening on Journal Socket.
[ 11.654522] systemd[1]: Mounting Debug File System...
[ 11.708667] systemd[1]: Starting Uncomplicated firewall...
[ 11.767773] systemd[1]: Started Read required files in advance.
[ 11.877792] systemd[1]: Starting Load Kernel Modules...
[ 11.931061] systemd[1]: Mounting POSIX Message Queue File System...
[ 11.990461] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 12.046789] systemd[1]: Reached target Slices.
[ 12.092535] systemd[1]: Reached target Swap.
[ 12.138101] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 12.190714] systemd[1]: Listening on udev Kernel Socket.
[ 12.245923] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.313045] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 12.393861] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.446707] systemd[1]: Starting Journal Service...
[ 12.501660] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 12.552721] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 12.607518] systemd[1]: Mounted Debug File System.
[ 12.657084] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.708480] systemd[1]: Started Uncomplicated firewall.
[ 12.756647] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 12.788102] systemd[1]: Failed to start Load Kernel Modules.
[ 12.857880] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 12.885592] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 12.916844] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 13.069296] systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
[ 13.133825] systemd[1]: ureadahead.service: Unit entered failed state.
[ 13.189080] systemd[1]: ureadahead.service: Failed with result 'exit-code'.
[ 13.279873] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.386134] systemd[1]: Mounting Configuration File System...
[ 13.453516] systemd[1]: Starting Apply Kernel Variables...
[ 13.516706] systemd[1]: Mounting FUSE Control File System...
[ 13.588808] systemd[1]: Mounted FUSE Control File System.
[ 13.643415] systemd[1]: Mounted Configuration File System.
[ 17.526173] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 17.600124] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 17.662978] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 17.740920] BUG: spinlock recursion on CPU#0, kworker/u2:1/85
[ 17.764338] lock: 0xed0d3a90, .magic: dead4ead, .owner: kworker/u2:1/85, .owner_cpu: 0
[ 17.790004] CPU: 0 PID: 85 Comm: kworker/u2:1 Not tainted 4.4.0-rc5-Sam460ex #8
[ 17.815013] Workqueue: events_unbound async_run_entry_fn
[ 17.838003] Call Trace:
[ 17.857940] [ee3cf8f0] [c0049238] do_raw_spin_lock+0x4c/0x100 (unreliable)
[ 17.882584] [ee3cf910] [c068af98] _raw_spin_lock_irqsave+0x2c/0x38
[ 17.906406] [ee3cf920] [f6a0ec24] sata_dwc_exec_command_by_tag.constprop.8+0x80/0xb4 [sata_dwc_460ex]
[ 17.933475] [ee3cf950] [f6a0f340] sata_dwc_qc_issue+0x350/0x370 [sata_dwc_460ex]
[ 17.958606] [ee3cf9d0] [c043bdf8] ata_qc_issue+0x338/0x3a0
[ 17.981758] [ee3cfa00] [c0440c84] ata_scsi_translate+0xf4/0x150
[ 18.005300] [ee3cfa20] [c0444080] ata_scsi_queuecmd+0x1e8/0x238
[ 18.028693] [ee3cfa40] [c042511c] scsi_dispatch_cmd+0xd4/0x110
[ 18.051855] [ee3cfa50] [c0427a9c] scsi_request_fn+0x52c/0x55c
[ 18.074815] [ee3cfaa0] [c024cd34] __blk_run_queue+0x44/0x58
[ 18.097499] [ee3cfab0] [c0250780] blk_queue_bio+0x220/0x23c
[ 18.119866] [ee3cfae0] [c024ec5c] generic_make_request+0xb8/0x150
[ 18.142617] [ee3cfb10] [c024eda4] submit_bio+0xb0/0x138
[ 18.164377] [ee3cfb60] [c00edb78] submit_bh_wbc.isra.25+0x168/0x174
[ 18.187123] [ee3cfb80] [c00edf4c] block_read_full_page+0x2f4/0x30c
[ 18.209615] [ee3cfc00] [c0088f34] do_read_cache_page+0xac/0x198
[ 18.231879] [ee3cfc40] [c025fc38] read_dev_sector+0x3c/0x80
[ 18.253598] [ee3cfc50] [c0261440] msdos_partition+0x78/0x54c
[ 18.275107] [ee3cfcd0] [c0260bd0] check_partition+0x13c/0x1f0
[ 18.296348] [ee3cfcf0] [c0260250] rescan_partitions+0xa8/0x2d8
[ 18.317603] [ee3cfd40] [c00f15a8] __blkdev_get+0x150/0x33c
[ 18.338529] [ee3cfd80] [c00f1804] blkdev_get+0x70/0x2c8
[ 18.359094] [ee3cfdd0] [c025e03c] add_disk+0x2a8/0x3f0
[ 18.379414] [ee3cfe10] [c0432790] sd_probe_async+0xe4/0x170
[ 18.400047] [ee3cfe30] [c003b9e4] async_run_entry_fn+0x94/0x1a4
[ 18.420967] [ee3cfe60] [c0034dcc] process_one_work+0x1c4/0x2d8
[ 18.441695] [ee3cfe90] [c00351a4] worker_thread+0x288/0x3a8
[ 18.462057] [ee3cfed0] [c0039798] kthread+0xc8/0xcc
[ 18.481569] [ee3cff40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 38.502397] BUG: spinlock lockup suspected on CPU#0, kworker/u2:1/85
[ 38.523431] lock: 0xed0d3a90, .magic: dead4ead, .owner: kworker/u2:1/85, .owner_cpu: 0
[ 38.546305] CPU: 0 PID: 85 Comm: kworker/u2:1 Not tainted 4.4.0-rc5-Sam460ex #8
[ 38.568544] Workqueue: events_unbound async_run_entry_fn
[ 38.588749] Call Trace:
[ 38.605995] [ee3cf8f0] [c00492d0] do_raw_spin_lock+0xe4/0x100 (unreliable)
[ 38.628171] [ee3cf910] [c068af98] _raw_spin_lock_irqsave+0x2c/0x38
[ 38.649690] [ee3cf920] [f6a0ec24] sata_dwc_exec_command_by_tag.constprop.8+0x80/0xb4 [sata_dwc_460ex]
[ 38.674577] [ee3cf950] [f6a0f340] sata_dwc_qc_issue+0x350/0x370 [sata_dwc_460ex]
[ 38.697644] [ee3cf9d0] [c043bdf8] ata_qc_issue+0x338/0x3a0
[ 38.718761] [ee3cfa00] [c0440c84] ata_scsi_translate+0xf4/0x150
[ 38.740247] [ee3cfa20] [c0444080] ata_scsi_queuecmd+0x1e8/0x238
[ 38.761765] [ee3cfa40] [c042511c] scsi_dispatch_cmd+0xd4/0x110
[ 38.783112] [ee3cfa50] [c0427a9c] scsi_request_fn+0x52c/0x55c
[ 38.804231] [ee3cfaa0] [c024cd34] __blk_run_queue+0x44/0x58
[ 38.825091] [ee3cfab0] [c0250780] blk_queue_bio+0x220/0x23c
[ 38.845820] [ee3cfae0] [c024ec5c] generic_make_request+0xb8/0x150
[ 38.867130] [ee3cfb10] [c024eda4] submit_bio+0xb0/0x138
[ 38.887470] [ee3cfb60] [c00edb78] submit_bh_wbc.isra.25+0x168/0x174
[ 38.908868] [ee3cfb80] [c00edf4c] block_read_full_page+0x2f4/0x30c
[ 38.930203] [ee3cfc00] [c0088f34] do_read_cache_page+0xac/0x198
[ 38.951313] [ee3cfc40] [c025fc38] read_dev_sector+0x3c/0x80
[ 38.972086] [ee3cfc50] [c0261440] msdos_partition+0x78/0x54c
[ 38.992867] [ee3cfcd0] [c0260bd0] check_partition+0x13c/0x1f0
[ 39.013580] [ee3cfcf0] [c0260250] rescan_partitions+0xa8/0x2d8
[ 39.034146] [ee3cfd40] [c00f15a8] __blkdev_get+0x150/0x33c
[ 39.054510] [ee3cfd80] [c00f1804] blkdev_get+0x70/0x2c8
[ 39.074728] [ee3cfdd0] [c025e03c] add_disk+0x2a8/0x3f0
[ 39.094630] [ee3cfe10] [c0432790] sd_probe_async+0xe4/0x170
[ 39.114778] [ee3cfe30] [c003b9e4] async_run_entry_fn+0x94/0x1a4
[ 39.135115] [ee3cfe60] [c0034dcc] process_one_work+0x1c4/0x2d8
[ 39.155211] [ee3cfe90] [c00351a4] worker_thread+0x288/0x3a8
[ 39.174978] [ee3cfed0] [c0039798] kthread+0xc8/0xcc
[ 39.193866] [ee3cff40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 39.214128] INFO: rcu_preempt self-detected stall on CPU
[ 39.233368] 0-...: (1 ticks this GP) idle=613/140000000000001/0 softirq=5887/5887 fqs=0
[ 39.255640] (t=21474 jiffies g=3526 c=3525 q=12)
[ 39.274431] rcu_preempt kthread starved for 21474 jiffies! g3526 c3525 f0x0 s3 ->state=0x1
[ 39.297067] Task dump for CPU 0:
[ 39.314609] kworker/u2:1 R running 0 85 2 0x00000800
[ 39.335555] Workqueue: events_unbound async_run_entry_fn
[ 39.355485] Call Trace:
[ 39.372445] [ee3cf7c0] [c00543a0] rcu_dump_cpu_stacks+0x90/0xb4 (unreliable)
[ 39.394450] [ee3cf7e0] [c0057470] rcu_check_callbacks+0x240/0x6b8
[ 39.415400] [ee3cf840] [c0059b94] update_process_times+0x30/0x60
[ 39.436239] [ee3cf850] [c0067638] tick_sched_timer+0x54/0xa4
[ 39.456725] [ee3cf880] [c005a60c] __hrtimer_run_queues.constprop.27+0xcc/0x170
[ 39.478919] [ee3cf8c0] [c005aaa4] hrtimer_interrupt+0xc0/0x230
[ 39.499689] [ee3cf910] [c0006d84] __timer_interrupt+0xcc/0x138
[ 39.520344] [ee3cf930] [c0006fc8] timer_interrupt+0x7c/0x9c
[ 39.540759] [ee3cf950] [c000b644] ret_from_except+0x0/0x18
[ 39.561109] --- interrupt: 901 at _raw_spin_unlock_irqrestore+0x1c/0x5c
[ 39.561109] LR = _raw_spin_unlock_irqrestore+0x18/0x5c
[ 39.603250] [ee3cfa20] [c04440c4] ata_scsi_queuecmd+0x22c/0x238
[ 39.624360] [ee3cfa40] [c042511c] scsi_dispatch_cmd+0xd4/0x110
[ 39.645378] [ee3cfa50] [c0427a9c] scsi_request_fn+0x52c/0x55c
[ 39.666289] [ee3cfaa0] [c024cd34] __blk_run_queue+0x44/0x58
[ 39.687001] [ee3cfab0] [c0250780] blk_queue_bio+0x220/0x23c
[ 39.707704] [ee3cfae0] [c024ec5c] generic_make_request+0xb8/0x150
[ 39.728989] [ee3cfb10] [c024eda4] submit_bio+0xb0/0x138
[ 39.749388] [ee3cfb60] [c00edb78] submit_bh_wbc.isra.25+0x168/0x174
[ 39.770846] [ee3cfb80] [c00edf4c] block_read_full_page+0x2f4/0x30c
[ 39.792104] [ee3cfc00] [c0088f34] do_read_cache_page+0xac/0x198
[ 39.812945] [ee3cfc40] [c025fc38] read_dev_sector+0x3c/0x80
[ 39.833223] [ee3cfc50] [c0261440] msdos_partition+0x78/0x54c
[ 39.853414] [ee3cfcd0] [c0260bd0] check_partition+0x13c/0x1f0
[ 39.873580] [ee3cfcf0] [c0260250] rescan_partitions+0xa8/0x2d8
[ 39.893695] [ee3cfd40] [c00f15a8] __blkdev_get+0x150/0x33c
[ 39.913382] [ee3cfd80] [c00f1804] blkdev_get+0x70/0x2c8
[ 39.932584] [ee3cfdd0] [c025e03c] add_disk+0x2a8/0x3f0
[ 39.951532] [ee3cfe10] [c0432790] sd_probe_async+0xe4/0x170
[ 39.970820] [ee3cfe30] [c003b9e4] async_run_entry_fn+0x94/0x1a4
[ 39.990490] [ee3cfe60] [c0034dcc] process_one_work+0x1c4/0x2d8
[ 40.010124] [ee3cfe90] [c00351a4] worker_thread+0x288/0x3a8
[ 40.029504] [ee3cfed0] [c0039798] kthread+0xc8/0xcc
[ 40.048155] [ee3cff40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 40.068299] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=-84148995
[ 40.090476] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
[ 40.110346] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2180b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
[ 40.136342] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
[ 40.159727] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
[ 40.182739] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
[ 40.207731] dma dma0chan0: dwc_tx_submit: queued 2
[ 40.227392] dma dma0chan0: dwc_dostart_first_queued: started 2
[ 46.486229] eth0: link is up, 1000 FDX, pause enabled
[ 48.748998] ata3: lost interrupt (Status 0x40)
[ 48.768588] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 48.796105] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 48.820533] ata3.00: failed command: READ FPDMA QUEUED
[ 48.844192] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 48.844192] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 48.889583] ata3.00: status: { DRDY }
[ 48.908848] ata3: hard resetting link
[ 48.927873] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 48.952190] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 48.975535] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
[ 49.000471] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 49.030029] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 49.053338] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
[ 49.278982] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 49.302139] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.331966] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.359968] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.387967] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.415967] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.438373] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 49.466029] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 49.491105] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.513537] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 49.539263] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.561795] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.585712] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.607936] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 49.631711] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 49.654650] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.676531] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 49.703146] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.727496] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 49.747216] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.769732] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 49.790901] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.818626] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 49.841091] dma dma0chan0: dwc_prep_slave_sg
[ 49.858798] dma dma0chan0: scanned 1 descriptors on freelist
[ 49.877942] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 49.906061] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 49.936459] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 49.959397] dma dma0chan0: dwc_prep_slave_sg
[ 49.978363] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 50.002235] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 50.024589] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 50.048069] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 50.069553] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 50.104340] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 50.134368] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 50.158199] dma dma0chan0: dwc_prep_slave_sg
[ 50.177991] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 50.206429] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 50.237379] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 50.262896] dma dma0chan0: dwc_prep_slave_sg
[ 50.283730] dma dma0chan0: scanned 1 descriptors on freelist
[ 50.306040] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 50.341072] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 50.374550] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 50.400559] dma dma0chan0: dwc_prep_slave_sg
[ 50.422478] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 50.449153] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 50.474548] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 50.501081] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 50.525465] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 50.565436] ata3.00: configured for UDMA/133
[ 50.587519] ata3.00: device reported invalid CHS sector 0
[ 50.611110] ata3: EH complete
[ 50.632057] ------------[ cut here ]------------
[ 50.654298] WARNING: at drivers/ata/libata-core.c:5051
[ 50.676874] Modules linked in: input_leds led_class sata_dwc_460ex
[ 50.700910] CPU: 0 PID: 191 Comm: scsi_eh_3 Not tainted 4.4.0-rc5-Sam460ex #8
[ 50.726010] task: ede1f980 ti: ed212000 task.ti: ed212000
[ 50.749410] NIP: c043bb0c LR: c0440c84 CTR: c0442b00
[ 50.772553] REGS: ed213c70 TRAP: 0700 Not tainted (4.4.0-rc5-Sam460ex)
[ 50.797742] MSR: 00021000 <CE,ME> CR: 22000048 XER: 00000000
[ 50.822161]
GPR00: c0440c84 ed213d20 ede1f980 ed2180b8 ed219a48 00000000 00000000 00000000
GPR08: 00000006 00000004 00000001 ed213d50 24000022 00000000 00000005 00002710
GPR16: c04263e0 c0944a03 c08fb4b8 c094492f c09020db ede8d01c 0000001e 00000000
GPR24: ed1370e0 ed204a80 edeaadd0 c0442b00 ed218000 ed2197c8 ed218000 ed2180b8
[ 50.948405] NIP [c043bb0c] ata_qc_issue+0x4c/0x3a0
[ 50.973042] LR [c0440c84] ata_scsi_translate+0xf4/0x150
[ 50.998159] Call Trace:
[ 51.020388] [ed213d20] [c0442c98] ata_scsi_rw_xlat+0x198/0x1e4 (unreliable)
[ 51.047495] [ed213d50] [c0440c84] ata_scsi_translate+0xf4/0x150
[ 51.073415] [ed213d70] [c0444080] ata_scsi_queuecmd+0x1e8/0x238
[ 51.099440] [ed213d90] [c042511c] scsi_dispatch_cmd+0xd4/0x110
[ 51.125501] [ed213da0] [c0427a9c] scsi_request_fn+0x52c/0x55c
[ 51.151586] [ed213df0] [c024cd34] __blk_run_queue+0x44/0x58
[ 51.177495] [ed213e00] [c024cf30] blk_run_queue+0x28/0x44
[ 51.203189] [ed213e10] [c0425c78] scsi_run_queue+0x240/0x268
[ 51.229301] [ed213e50] [c0427b04] scsi_run_host_queues+0x30/0x44
[ 51.255862] [ed213e60] [c0424d44] scsi_error_handler+0x3e0/0x44c
[ 51.282225] [ed213ed0] [c0039798] kthread+0xc8/0xcc
[ 51.307246] [ed213f40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 51.333819] Instruction dump:
[ 51.356763] 815e0004 83a90000 89230014 814a0058 2f8a0000 419e0038 815d0120 2b8a001f
[ 51.384755] 419d002c 3d40c0a3 894a575b 694a0001 <0f0a0000> 2f8a0000 41be0014 3d40c0a3
[ 51.412813] ---[ end trace edd5594837b7dac7 ]---
[ 51.437400] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 51.466421] dma dma0chan0: dwc_prep_slave_sg
[ 51.490336] dma dma0chan0: scanned 1 descriptors on freelist
[ 51.515328] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xede03000, count: 1 addr: 0xfffffffff6a18400
[ 51.544511] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue: tag=0 ap->link.sactive = 0x00000001 sactive=0x00000001
[ 51.574127] sata-dwc 4bffd1000.sata: sata_dwc_exec_command_by_tag cmd(0x60): READ FPDMA QUEUED tag=0
[ 71.602876] BUG: spinlock lockup suspected on CPU#0, scsi_eh_3/191
[ 71.628719] lock: 0xed0d3a90, .magic: dead4ead, .owner: scsi_eh_3/191, .owner_cpu: 0
[ 71.656444] CPU: 0 PID: 191 Comm: scsi_eh_3 Tainted: G W 4.4.0-rc5-Sam460ex #8
[ 71.684851] Call Trace:
[ 71.706768] [ed213c40] [c00492d0] do_raw_spin_lock+0xe4/0x100 (unreliable)
[ 71.733216] [ed213c60] [c068af98] _raw_spin_lock_irqsave+0x2c/0x38
[ 71.758803] [ed213c70] [f6a0ec24] sata_dwc_exec_command_by_tag.constprop.8+0x80/0xb4 [sata_dwc_460ex]
[ 71.787572] [ed213ca0] [f6a0f340] sata_dwc_qc_issue+0x350/0x370 [sata_dwc_460ex]
[ 71.814217] [ed213d20] [c043bdf8] ata_qc_issue+0x338/0x3a0
[ 71.838640] [ed213d50] [c0440c84] ata_scsi_translate+0xf4/0x150
[ 71.863277] [ed213d70] [c0444080] ata_scsi_queuecmd+0x1e8/0x238
[ 71.887877] [ed213d90] [c042511c] scsi_dispatch_cmd+0xd4/0x110
[ 71.912096] [ed213da0] [c0427a9c] scsi_request_fn+0x52c/0x55c
[ 71.935749] [ed213df0] [c024cd34] __blk_run_queue+0x44/0x58
[ 71.958822] [ed213e00] [c024cf30] blk_run_queue+0x28/0x44
[ 71.981505] [ed213e10] [c0425c78] scsi_run_queue+0x240/0x268
[ 72.004257] [ed213e50] [c0427b04] scsi_run_host_queues+0x30/0x44
[ 72.027295] [ed213e60] [c0424d44] scsi_error_handler+0x3e0/0x44c
[ 72.050269] [ed213ed0] [c0039798] kthread+0xc8/0xcc
[ 72.072009] [ed213f40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 72.095160] INFO: rcu_preempt self-detected stall on CPU
[ 72.117301] 0-...: (1 ticks this GP) idle=c61/140000000000002/0 softirq=13985/13985 fqs=0
[ 72.142802] (t=21464 jiffies g=7142 c=7141 q=2)
[ 72.164656] rcu_preempt kthread starved for 21464 jiffies! g7142 c7141 f0x0 s3 ->state=0x1
[ 72.190408] Task dump for CPU 0:
[ 72.210989] scsi_eh_3 R running 0 191 2 0x00000800
[ 72.234842] Call Trace:
[ 72.254394] [effefd30] [c00543a0] rcu_dump_cpu_stacks+0x90/0xb4 (unreliable)
[ 72.278833] [effefd50] [c0057470] rcu_check_callbacks+0x240/0x6b8
[ 72.302204] [effefdb0] [c0059b94] update_process_times+0x30/0x60
[ 72.325362] [effefdc0] [c0067638] tick_sched_timer+0x54/0xa4
[ 72.348046] [effefdf0] [c005a60c] __hrtimer_run_queues.constprop.27+0xcc/0x170
[ 72.372401] [effefe30] [c005aaa4] hrtimer_interrupt+0xc0/0x230
[ 72.395217] [effefe80] [c0006d84] __timer_interrupt+0xcc/0x138
[ 72.417921] [effefea0] [c0006fc8] timer_interrupt+0x7c/0x9c
[ 72.440290] [effefec0] [c000b644] ret_from_except+0x0/0x18
[ 72.462459] --- interrupt: 901 at __do_softirq+0x9c/0x1f0
[ 72.462459] LR = __do_softirq+0x90/0x1f0
[ 72.505065] [effeff80] [c0023b8c] __do_softirq+0x48/0x1f0 (unreliable)
[ 72.528286] [effeffe0] [c0023f68] irq_exit+0x58/0xa0
[ 72.549722] [effefff0] [c000a0f4] call_do_irq+0x24/0x3c
[ 72.571392] [ed213c70] [c0003528] do_IRQ+0x94/0xd4
[ 72.592634] [ed213ca0] [c000b644] ret_from_except+0x0/0x18
[ 72.614615] --- interrupt: 501 at _raw_spin_unlock_irqrestore+0x1c/0x5c
[ 72.614615] LR = _raw_spin_unlock_irqrestore+0x18/0x5c
[ 72.660083] [ed213d70] [c04440c4] ata_scsi_queuecmd+0x22c/0x238
[ 72.682877] [ed213d90] [c042511c] scsi_dispatch_cmd+0xd4/0x110
[ 72.705559] [ed213da0] [c0427a9c] scsi_request_fn+0x52c/0x55c
[ 72.728162] [ed213df0] [c024cd34] __blk_run_queue+0x44/0x58
[ 72.750603] [ed213e00] [c024cf30] blk_run_queue+0x28/0x44
[ 72.772807] [ed213e10] [c0425c78] scsi_run_queue+0x240/0x268
[ 72.795255] [ed213e50] [c0427b04] scsi_run_host_queues+0x30/0x44
[ 72.817937] [ed213e60] [c0424d44] scsi_error_handler+0x3e0/0x44c
[ 72.840443] [ed213ed0] [c0039798] kthread+0xc8/0xcc
[ 72.861670] [ed213f40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 72.884234] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x00000082 active_tag=0
[ 72.907819] sata-dwc 4bffd1000.sata: sata_dwc_isr: NEWFP tag=0
[ 72.929599] sata-dwc 4bffd1000.sata: sata_dwc_bmdma_start_by_tag qc=ed2180b8 tag: 0 cmd: 0x60 dma_dir: from device start_dma? 1
[ 72.957522] sata-dwc 4bffd1000.sata: taskfile cmd: 0x60 protocol: ATA NCQ flags: 0x17 device: 40
[ 72.982574] sata-dwc 4bffd1000.sata: feature: 0x08 nsect: 0x0 lbal: 0x0 lbam: 0x0 lbah: 0x0
[ 73.007115] sata-dwc 4bffd1000.sata: hob_feature: 0x00 hob_nsect: 0x0 hob_lbal: 0x0 hob_lbam: 0x0 hob_lbah: 0x0
[ 73.033529] dma dma0chan0: dwc_tx_submit: queued 3
[ 80.732990] ata3: lost interrupt (Status 0x40)
[ 80.754529] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 80.780172] ata3.00: NCQ disabled due to excessive errors
[ 80.803226] ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
[ 80.827641] ata3.00: failed command: READ FPDMA QUEUED
[ 80.853108] ata3.00: cmd 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
[ 80.853108] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 80.902186] ata3.00: status: { DRDY }
[ 80.926045] ata3: hard resetting link
[ 80.948405] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 80.975234] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 81.000804] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000301
[ 81.029104] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 81.057029] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000301
[ 81.084625] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000300
[ 81.316980] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 81.352030] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.388979] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.422271] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.456977] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.489486] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 81.515191] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 81.546173] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.572910] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 81.609067] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.639227] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.667484] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.693436] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 81.721173] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 81.748842] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.776224] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 81.801565] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.830135] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 81.859068] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.888945] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 81.914747] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 81.946907] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 81.973608] dma dma0chan0: dwc_prep_slave_sg
[ 81.995629] dma dma0chan0: scanned 1 descriptors on freelist
[ 82.019139] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 82.054164] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 82.108803] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 82.137087] dma dma0chan0: dwc_prep_slave_sg
[ 82.161263] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 82.190303] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 82.218088] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 82.247183] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 82.274328] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 82.320268] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 82.356018] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 82.385638] dma dma0chan0: dwc_prep_slave_sg
[ 82.411202] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 82.447480] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 82.484012] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 82.515135] dma dma0chan0: dwc_prep_slave_sg
[ 82.541437] dma dma0chan0: scanned 1 descriptors on freelist
[ 82.568974] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 82.615103] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 82.676962] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 82.708729] dma dma0chan0: dwc_prep_slave_sg
[ 82.736402] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 82.768725] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 82.799633] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 82.831767] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 82.861845] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 82.913577] ata3.00: configured for UDMA/133
[ 82.941672] ata3.00: device reported invalid CHS sector 0
[ 82.973869] ata3: EH complete
[ 83.002278] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 83.035381] dma dma0chan0: dwc_prep_slave_sg
[ 83.062913] dma dma0chan0: scanned 1 descriptors on freelist
[ 83.091091] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xede03000, count: 1 addr: 0xfffffffff6a18400
[ 83.123884] ------------[ cut here ]------------
[ 83.151640] WARNING: at drivers/ata/libata-sff.c:1493
[ 83.179895] Modules linked in: input_leds led_class sata_dwc_460ex
[ 83.209554] CPU: 0 PID: 191 Comm: scsi_eh_3 Tainted: G W 4.4.0-rc5-Sam460ex #8
[ 83.241729] task: ede1f980 ti: ed212000 task.ti: ed212000
[ 83.271085] NIP: c044d734 LR: c044d5a4 CTR: c044a354
[ 83.300192] REGS: ed213bd0 TRAP: 0700 Tainted: G W (4.4.0-rc5-Sam460ex)
[ 83.332794] MSR: 00021000 <CE,ME> CR: 24008044 XER: 20000000
[ 83.362568]
GPR00: c044d5a4 ed213c80 ede1f980 00000050 f6a18018 00000000 c02e1328 00000000
GPR08: 00000000 00000001 e3b4724c ed213c80 c044d560 00000000 00000005 00002710
GPR16: c04263e0 c0944a03 c08fb4b8 c094492f c09020db ede8d01c c09fd770 00000000
GPR24: ed13ef00 edd18a50 ffa0d510 ed218000 00000000 ed2197c8 ed218000 ed2180b8
[ 83.509173] NIP [c044d734] ata_sff_qc_issue+0x1d4/0x1fc
[ 83.538139] LR [c044d5a4] ata_sff_qc_issue+0x44/0x1fc
[ 83.567082] Call Trace:
[ 83.593340] [ed213c80] [c044d5a4] ata_sff_qc_issue+0x44/0x1fc (unreliable)
[ 83.624473] [ed213ca0] [f6a0f34c] sata_dwc_qc_issue+0x35c/0x370 [sata_dwc_460ex]
[ 83.656359] [ed213d20] [c043bdf8] ata_qc_issue+0x338/0x3a0
[ 83.686453] [ed213d50] [c0440c84] ata_scsi_translate+0xf4/0x150
[ 83.716784] [ed213d70] [c0444080] ata_scsi_queuecmd+0x1e8/0x238
[ 83.746888] [ed213d90] [c042511c] scsi_dispatch_cmd+0xd4/0x110
[ 83.777019] [ed213da0] [c0427a9c] scsi_request_fn+0x52c/0x55c
[ 83.806709] [ed213df0] [c024cd34] __blk_run_queue+0x44/0x58
[ 83.835889] [ed213e00] [c024cf30] blk_run_queue+0x28/0x44
[ 83.864638] [ed213e10] [c0425c78] scsi_run_queue+0x240/0x268
[ 83.893685] [ed213e50] [c0427b04] scsi_run_host_queues+0x30/0x44
[ 83.922781] [ed213e60] [c0424d44] scsi_error_handler+0x3e0/0x44c
[ 83.951018] [ed213ed0] [c0039798] kthread+0xc8/0xcc
[ 83.977245] [ed213f40] [c000b0d0] ret_from_kernel_thread+0x5c/0x64
[ 84.004608] Instruction dump:
[ 84.028507] 7d2903a6 4e800421 39200001 913e2720 813f0004 8129000c 71280004 4082ff80
[ 84.057576] 4bffff88 3d20c0a3 89295769 69290001 <0f090000> 2f890000 38600040 41be0014
[ 84.086901] ---[ end trace edd5594837b7dac8 ]---
[ 113.772979] ata3: lost interrupt (Status 0x50)
[ 113.799726] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 113.829369] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000123
[ 113.860236] ata3: limiting SATA link speed to 1.5 Gbps
[ 113.886650] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 113.915214] ata3.00: failed command: READ DMA
[ 113.940265] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 113.940265] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 113.996469] ata3.00: status: { DRDY }
[ 114.020749] ata3: hard resetting link
[ 114.044134] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 114.071035] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000300
[ 114.099169] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000304
[ 114.125859] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000304
[ 114.154034] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000314
[ 114.180449] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000314
[ 114.208415] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 114.237771] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 114.266006] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 114.293043] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 114.521971] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 114.548653] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.581963] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.612968] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.643967] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.674968] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.699872] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 114.728343] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 114.753618] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.780797] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 114.808079] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.835184] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.860423] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.886908] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 114.911682] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 114.937898] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 114.962475] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 114.988321] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 115.012399] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 115.035713] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 115.060003] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 115.085580] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 115.116465] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 115.141879] dma dma0chan0: dwc_prep_slave_sg
[ 115.162547] dma dma0chan0: scanned 1 descriptors on freelist
[ 115.184712] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 115.218065] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 115.270208] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 115.297400] dma dma0chan0: dwc_prep_slave_sg
[ 115.320594] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 115.348630] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 115.375458] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 115.403606] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 115.429761] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 115.463555] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 115.498089] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 115.526376] dma dma0chan0: dwc_prep_slave_sg
[ 115.550515] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 115.582408] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 115.617386] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 115.646828] dma dma0chan0: dwc_prep_slave_sg
[ 115.671211] dma dma0chan0: scanned 1 descriptors on freelist
[ 115.696629] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 115.733039] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 115.791345] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 115.821480] dma dma0chan0: dwc_prep_slave_sg
[ 115.847494] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 115.878362] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 115.907836] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 115.938658] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 115.967331] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 115.997934] ata3.00: configured for UDMA/133
[ 116.024738] ata3.00: device reported invalid CHS sector 0
[ 116.052666] ata3: EH complete
[ 116.078090] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 116.109719] dma dma0chan0: dwc_prep_slave_sg
[ 116.136671] dma dma0chan0: scanned 1 descriptors on freelist
[ 116.164486] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xede03000, count: 1 addr: 0xfffffffff6a18400
[ 146.796992] ata3: lost interrupt (Status 0x50)
[ 146.824110] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 146.854809] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 146.887170] ata3.00: limiting speed to UDMA/100:PIO4
[ 146.915244] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 146.946081] ata3.00: failed command: READ DMA
[ 146.973930] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 146.973930] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 147.036667] ata3.00: status: { DRDY }
[ 147.063899] ata3: hard resetting link
[ 147.090461] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 147.122253] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 147.153816] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 147.184767] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 147.220980] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 147.252790] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 147.486973] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 147.519274] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.558966] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.596967] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.633967] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.665596] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 147.698797] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 147.733423] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.765049] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 147.800275] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.832379] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.865645] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.896356] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 147.927583] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 147.957152] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 147.987995] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 148.016898] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 148.047195] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 148.074361] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 148.104366] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 148.133172] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 148.168460] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 148.198129] dma dma0chan0: dwc_prep_slave_sg
[ 148.222956] dma dma0chan0: scanned 1 descriptors on freelist
[ 148.249042] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 148.286077] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 148.344409] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 148.374578] dma dma0chan0: dwc_prep_slave_sg
[ 148.400454] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 148.430313] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 148.458088] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 148.486922] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 148.513598] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 148.549338] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 148.584288] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 148.613076] dma dma0chan0: dwc_prep_slave_sg
[ 148.637798] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 148.670350] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 148.705945] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 148.736167] dma dma0chan0: dwc_prep_slave_sg
[ 148.761732] dma dma0chan0: scanned 1 descriptors on freelist
[ 148.788540] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 148.826058] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 148.886649] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 148.917503] dma dma0chan0: dwc_prep_slave_sg
[ 148.943909] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 148.975273] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 149.005224] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 149.036392] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 149.065508] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 149.102497] ata3.00: configured for UDMA/100
[ 149.129429] ata3.00: device reported invalid CHS sector 0
[ 149.157659] ata3: EH complete
[ 149.183291] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 149.214858] dma dma0chan0: dwc_prep_slave_sg
[ 149.241879] dma dma0chan0: scanned 1 descriptors on freelist
[ 149.270363] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xede03000, count: 1 addr: 0xfffffffff6a18400
[ 167.861424] cgroup: new mount options do not match the existing superblock, will be ignored
[ 171.155098] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 171.534870] IPv6: ADDRCONF(NETDEV_UP): tunl0: link is not ready
[ 171.862585] IPv6: ADDRCONF(NETDEV_UP): sit0: link is not ready
[ 179.757023] ata3: lost interrupt (Status 0x50)
[ 179.770989] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 179.822982] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 179.869980] ata3.00: limiting speed to UDMA/33:PIO4
[ 179.902997] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 179.944988] ata3.00: failed command: READ DMA
[ 179.979999] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 179.979999] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 180.106952] ata3.00: status: { DRDY }
[ 180.135998] ata3: hard resetting link
[ 180.166659] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 180.238090] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 180.305472] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 180.366985] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 180.435989] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 180.474988] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 180.707980] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 180.738032] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 180.785966] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 180.828063] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 180.856980] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 180.901960] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 180.953968] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 180.991986] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 181.037990] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 181.093983] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 181.138982] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 181.172988] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 181.205988] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 181.239955] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 181.274984] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 181.307954] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 181.341974] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 181.375594] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 181.403987] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 181.437982] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113

Ubuntu Xenial Xerus (development branch) Sam460ex ttyS0

Sam460ex login: [ 181.469997] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 181.484185] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 181.493060] dma dma0chan0: dwc_prep_slave_sg
[ 181.497340] dma dma0chan0: scanned 1 descriptors on freelist
[ 181.503010] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 181.644627] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 181.660209] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 181.668477] dma dma0chan0: dwc_prep_slave_sg
[ 181.672755] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 181.681412] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 181.688816] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 181.697434] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 181.704136] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 181.832035] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 181.846312] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 181.854579] dma dma0chan0: dwc_prep_slave_sg
[ 181.858857] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 181.981987] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 181.996181] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 182.005057] dma dma0chan0: dwc_prep_slave_sg
[ 182.009336] dma dma0chan0: scanned 1 descriptors on freelist
[ 182.015006] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 182.211323] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 182.226902] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 182.235169] dma dma0chan0: dwc_prep_slave_sg
[ 182.239439] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 182.248102] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 182.255508] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 182.264127] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 182.270829] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 182.351027] ata3.00: configured for UDMA/33
[ 182.362954] ata3.00: device reported invalid CHS sector 0
[ 182.374990] ata3: EH complete
[ 182.381004] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 182.389895] dma dma0chan0: dwc_prep_slave_sg
[ 182.394171] dma dma0chan0: scanned 1 descriptors on freelist
[ 182.399841] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xede03000, count: 1 addr: 0xfffffffff6a18400
[ 212.780796] ata3: lost interrupt (Status 0x50)
[ 212.786455] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 212.794375] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 212.804400] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 212.811518] ata3.00: failed command: READ DMA
[ 212.816686] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 212.816686] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 212.831914] ata3.00: status: { DRDY }
[ 212.835631] ata3: hard resetting link
[ 212.840046] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 212.847912] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 212.857818] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 212.865789] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 212.876797] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 212.884659] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 213.095779] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 213.103636] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.118778] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.133777] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.146777] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.159776] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.172777] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.185777] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.198776] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.211776] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.221171] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 213.229167] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 213.239295] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.247214] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 213.258689] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.266597] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.276653] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.284587] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 213.294559] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 213.302555] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.312485] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 213.320557] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.330520] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 213.336806] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.346201] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 213.354113] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 213.368286] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 213.377167] dma dma0chan0: dwc_prep_slave_sg
[ 213.381446] dma dma0chan0: scanned 1 descriptors on freelist
[ 213.387116] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 213.400875] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 213.416449] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 213.424718] dma dma0chan0: dwc_prep_slave_sg
[ 213.428996] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 213.437655] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 213.445058] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 213.453675] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 213.460378] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 213.478064] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 213.492334] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 213.500603] dma dma0chan0: dwc_prep_slave_sg
[ 213.504882] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 213.517470] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 213.531658] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 213.540534] dma dma0chan0: dwc_prep_slave_sg
[ 213.544814] dma dma0chan0: scanned 1 descriptors on freelist
[ 213.550484] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 213.564909] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 213.580485] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 213.588754] dma dma0chan0: dwc_prep_slave_sg
[ 213.593033] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 213.601702] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 213.609103] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 213.617721] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 213.624432] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 213.641238] ata3.00: configured for UDMA/33
[ 213.645507] ata3.00: device reported invalid CHS sector 0
[ 213.651832] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 213.660070] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x5 [current] [descriptor]
[ 213.669241] sd 3:0:0:0: [sdc] tag#0 ASC=0x21 ASCQ=0x4
[ 213.674464] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 213.684248] blk_update_request: I/O error, dev sdc, sector 0
[ 213.689984] Buffer I/O error on dev sdc, logical block 0, async page read
[ 213.697874] ata3: EH complete
[ 213.701565] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 213.710449] dma dma0chan0: dwc_prep_slave_sg
[ 213.714727] dma dma0chan0: scanned 1 descriptors on freelist
[ 213.720397] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xecee2e00, count: 1 addr: 0xfffffffff6a18400
[ 243.756717] ata3: lost interrupt (Status 0x50)
[ 243.768715] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 243.794692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 243.821705] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 243.845703] ata3.00: failed command: READ DMA
[ 243.860706] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 243.860706] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 243.910682] ata3.00: status: { DRDY }
[ 243.923716] ata3: hard resetting link
[ 243.936714] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 243.964708] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 243.993700] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 244.025672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 244.054665] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 244.078702] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 244.305667] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 244.330665] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.368686] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.390665] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.422895] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.451692] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.471681] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 244.498712] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 244.526689] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.555665] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 244.587669] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.613699] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.638677] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.667697] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 244.695328] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 244.724689] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.753695] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 244.778680] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.806667] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 244.829701] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.854683] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 244.886085] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 244.900278] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 244.909154] dma dma0chan0: dwc_prep_slave_sg
[ 244.913434] dma dma0chan0: scanned 1 descriptors on freelist
[ 244.919103] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 245.035527] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue a[ 276.780527] ata3: lost interrupt (Status 0x50)
[ 276.790506] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 276.806527] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 276.822509] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 276.837494] ata3.00: failed command: READ DMA
[ 276.847511] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 276.847511] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 276.877494] ata3.00: status: { DRDY }
[ 276.885506] ata3: hard resetting link
[ 276.893504] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 276.911506] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 276.928498] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 276.946505] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 276.965511] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 276.980492] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 277.199513] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 277.214500] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.238507] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.259505] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.280507] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.303505] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.324508] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.340501] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 277.356496] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 277.374499] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.391502] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 277.411498] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.429502] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.446503] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.464508] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 277.481493] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 277.499494] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.516491] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 277.533493] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.551489] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 277.564506] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.581503] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 277.598510] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 277.612700] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 277.621575] dma dma0chan0: dwc_prep_slave_sg
[ 277.625855] dma dma0chan0: scanned 1 descriptors on freelist
[ 277.631525] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 277.689544] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 277.705121] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 277.713389] dma dma0chan0: dwc_prep_slave_sg
[ 277.717668] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 277.726331] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 277.733737] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 277.742355] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 277.749058] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 277.803551] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 277.817830] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 277.826097] dma dma0chan0: dwc_prep_slave_sg
[ 277.830377] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 277.878516] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 277.892709] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 277.901584] dma dma0chan0: dwc_prep_slave_sg
[ 277.905863] dma dma0chan0: scanned 1 descriptors on freelist
[ 277.911533] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 277.969541] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 277.985121] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 277.993389] dma dma0chan0: dwc_prep_slave_sg
[ 277.997667] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 278.006326] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 278.013729] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 278.022347] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 278.029058] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 278.083528] ata3.00: configured for UDMA/33
[ 278.093510] ata3.00: device reported invalid CHS sector 0
[ 278.104533] ata3: EH complete
[ 278.111546] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 278.120442] dma dma0chan0: dwc_prep_slave_sg
[ 278.124718] dma dma0chan0: scanned 1 descriptors on freelist
[ 278.130388] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xecee2e00, count: 1 addr: 0xfffffffff6a18400
[ 309.100335] ata3: lost interrupt (Status 0x50)
[ 309.106017] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 309.113940] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.123986] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 309.131111] ata3.00: failed command: READ DMA
[ 309.136462] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 309.136462] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 309.151096] ata3.00: status: { DRDY }
[ 309.155543] ata3: hard resetting link
[ 309.161796] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 309.175122] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 309.188444] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 309.202882] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 309.223358] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 309.242906] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 309.466338] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 309.478642] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.495339] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.513323] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.531394] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.550562] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.567333] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.585364] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.596044] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 309.606877] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 309.619112] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.629869] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 309.643516] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.651419] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.663187] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.671132] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 309.681405] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 309.689383] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.699485] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 309.707378] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.719005] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 309.725963] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.733870] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 309.746924] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 309.761111] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 309.769987] dma dma0chan0: dwc_prep_slave_sg
[ 309.774266] dma dma0chan0: scanned 1 descriptors on freelist
[ 309.779936] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 309.799418] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 309.814999] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 309.823267] dma dma0chan0: dwc_prep_slave_sg
[ 309.827545] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 309.836272] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 309.843677] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 309.852295] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 309.859006] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 309.880670] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 309.894947] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 309.903216] dma dma0chan0: dwc_prep_slave_sg
[ 309.907493] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 309.923385] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 309.937579] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 309.946454] dma dma0chan0: dwc_prep_slave_sg
[ 309.950733] dma dma0chan0: scanned 1 descriptors on freelist
[ 309.956403] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 309.971297] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 309.986874] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 309.995142] dma dma0chan0: dwc_prep_slave_sg
[ 309.999421] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 310.008081] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 310.015482] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 310.024100] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 310.030802] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 310.052031] ata3.00: configured for UDMA/33
[ 310.058518] ata3.00: device reported invalid CHS sector 0
[ 310.066060] ata3: EH complete
[ 310.069874] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 310.078765] dma dma0chan0: dwc_prep_slave_sg
[ 310.083042] dma dma0chan0: scanned 1 descriptors on freelist
[ 310.088713] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xecee2e00, count: 1 addr: 0xfffffffff6a18400
[ 339.513940] systemd-fstab-generator[1564]: Mount point is not a valid path, ignoring.
[ 341.100220] ata3: lost interrupt (Status 0x50)
[ 341.111206] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 341.122517] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.136254] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 341.144951] ata3.00: failed command: READ DMA
[ 341.149559] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 341.149559] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 341.172196] ata3.00: status: { DRDY }
[ 341.180194] ata3: hard resetting link
[ 341.188185] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 341.204190] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 341.221185] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 341.239194] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 341.259197] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 341.275188] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 341.493177] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 341.509171] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.532202] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.553210] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.574210] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.595212] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.616210] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.631223] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 341.650233] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 341.668218] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.687235] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 341.709213] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.727224] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.745221] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.764235] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 341.783216] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 341.802234] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.823220] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 341.842204] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.862170] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 341.873218] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.890222] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 341.908226] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 341.922413] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 341.931288] dma dma0chan0: dwc_prep_slave_sg
[ 341.935567] dma dma0chan0: scanned 1 descriptors on freelist
[ 341.941237] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 342.001258] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 342.016840] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 342.025107] dma dma0chan0: dwc_prep_slave_sg
[ 342.029386] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 342.038037] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 342.045438] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 342.054056] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 342.060767] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 342.117264] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 342.131544] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 342.139812] dma dma0chan0: dwc_prep_slave_sg
[ 342.144091] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 342.195231] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 342.209417] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 342.218294] dma dma0chan0: dwc_prep_slave_sg
[ 342.222573] dma dma0chan0: scanned 1 descriptors on freelist
[ 342.228243] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 342.291254] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 342.306831] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 342.315099] dma dma0chan0: dwc_prep_slave_sg
[ 342.319377] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 342.328033] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 342.335438] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 342.344056] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 342.350758] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 342.406204] ata3.00: configured for UDMA/33
[ 342.415184] ata3.00: device reported invalid CHS sector 0
[ 342.427212] ata3: EH complete
[ 342.436218] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 342.445110] dma dma0chan0: dwc_prep_slave_sg
[ 342.449387] dma dma0chan0: scanned 1 descriptors on freelist
[ 342.455058] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xecee2e00, count: 1 addr: 0xfffffffff6a18400
[ 373.100056] ata3: lost interrupt (Status 0x50)
[ 373.106340] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 373.114259] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.124374] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 373.131487] ata3.00: failed command: READ DMA
[ 373.136705] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 373.136705] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 373.159046] ata3.00: status: { DRDY }
[ 373.169410] ata3: hard resetting link
[ 373.173658] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 373.183270] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 373.191160] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 373.201381] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 373.211461] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 373.219509] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 373.431042] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 373.438906] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.463577] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.482035] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.495020] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.508020] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.521019] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.534019] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.547020] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.564093] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 373.579506] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 373.587470] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.597855] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 373.607339] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.617404] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.625315] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.635381] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 373.643281] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 373.653411] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.671207] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 373.686278] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.694149] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 373.702077] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.709968] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 373.719982] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 373.734173] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 373.743050] dma dma0chan0: dwc_prep_slave_sg
[ 373.747330] dma dma0chan0: scanned 1 descriptors on freelist
[ 373.752999] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 373.774093] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 373.789669] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 373.797937] dma dma0chan0: dwc_prep_slave_sg
[ 373.802215] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 373.810875] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 373.818277] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 373.826894] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 373.833597] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 373.859143] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 373.873419] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 373.881686] dma dma0chan0: dwc_prep_slave_sg
[ 373.885957] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 373.907119] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 373.921310] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 373.930185] dma dma0chan0: dwc_prep_slave_sg
[ 373.934465] dma dma0chan0: scanned 1 descriptors on freelist
[ 373.940135] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 373.961713] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 373.977291] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 373.985558] dma dma0chan0: dwc_prep_slave_sg
[ 373.989836] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 373.998494] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 374.005897] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 374.014516] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 374.021218] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 374.042121] ata3.00: configured for UDMA/33
[ 374.054089] ata3.00: device reported invalid CHS sector 0
[ 374.060977] ata3: EH complete
[ 374.064356] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 374.073241] dma dma0chan0: dwc_prep_slave_sg
[ 374.077521] dma dma0chan0: scanned 1 descriptors on freelist
[ 374.083191] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xecee2e00, count: 1 addr: 0xfffffffff6a18400
[ 405.099917] ata3: lost interrupt (Status 0x50)
[ 405.105605] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 405.113535] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.123697] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 405.130826] ata3.00: failed command: READ DMA
[ 405.136175] ata3.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
[ 405.136175] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 405.150816] ata3.00: status: { DRDY }
[ 405.155261] ata3: hard resetting link
[ 405.158970] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 405.168326] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 405.186134] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 405.200604] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 405.210368] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 405.218279] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 405.428900] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 405.436762] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.452885] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.465881] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.488485] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.506907] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.519880] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.532879] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.545880] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.555322] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 405.563223] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 405.573331] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.591166] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 405.607135] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.615010] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.625248] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.633174] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 405.643206] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 405.651196] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.661401] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 405.669308] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.679347] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 405.694435] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.709120] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 405.717010] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 405.731183] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 405.740064] dma dma0chan0: dwc_prep_slave_sg
[ 405.744344] dma dma0chan0: scanned 1 descriptors on freelist
[ 405.750013] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 405.763989] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 405.779563] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 405.787832] dma dma0chan0: dwc_prep_slave_sg
[ 405.792111] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 405.800768] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 405.808172] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 405.816789] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 405.823492] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 405.855859] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 405.870138] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 405.878405] dma dma0chan0: dwc_prep_slave_sg
[ 405.882683] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 405.895640] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 405.909824] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 405.918701] dma dma0chan0: dwc_prep_slave_sg
[ 405.922980] dma dma0chan0: scanned 1 descriptors on freelist
[ 405.928651] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 405.951001] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 405.966579] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 405.974846] dma dma0chan0: dwc_prep_slave_sg
[ 405.979124] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 405.987787] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 405.995195] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 406.003813] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 406.010515] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 406.034848] ata3.00: configured for UDMA/33
[ 406.039138] ata3.00: device reported invalid CHS sector 0
[ 406.053672] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 406.068497] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x5 [current] [descriptor]
[ 406.075513] sd 3:0:0:0: [sdc] tag#0 ASC=0x21 ASCQ=0x4
[ 406.083124] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 00 00 00 00 08 00
[ 406.090753] blk_update_request: I/O error, dev sdc, sector 0
[ 406.098157] Buffer I/O error on dev sdc, logical block 0, async page read
[ 406.105012] Dev sdc: unable to read RDB block 0
[ 406.110515] ata3: EH complete
[ 406.114135] sdc: unable to read partition table
[ 406.120579] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 406.129468] dma dma0chan0: dwc_prep_slave_sg
[ 406.133744] dma dma0chan0: scanned 1 descriptors on freelist
[ 406.139415] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xeccbc100, count: 1 addr: 0xfffffffff6a18400
[ 437.099776] ata3: lost interrupt (Status 0x50)
[ 437.105566] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 437.113493] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.123635] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 437.130770] ata3.00: failed command: READ DMA EXT
[ 437.136317] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 437.136317] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 437.150971] ata3.00: status: { DRDY }
[ 437.155391] ata3: hard resetting link
[ 437.159108] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 437.168466] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 437.186224] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 437.200773] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 437.211753] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 437.219643] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 437.430766] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 437.438626] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.454746] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.467740] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.487285] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.507768] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.520740] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.533740] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.546740] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.556204] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 437.564100] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 437.574239] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.592060] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 437.608026] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.615903] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.626107] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.634020] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 437.644100] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 437.652091] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.662362] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 437.670275] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.680417] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 437.695278] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.710232] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 437.718124] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 437.732294] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 437.741175] dma dma0chan0: dwc_prep_slave_sg
[ 437.745454] dma dma0chan0: scanned 1 descriptors on freelist
[ 437.751125] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 437.764845] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 437.780423] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 437.788690] dma dma0chan0: dwc_prep_slave_sg
[ 437.792961] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 437.801618] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 437.809023] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 437.817641] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 437.824352] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 437.857083] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 437.871362] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 437.879629] dma dma0chan0: dwc_prep_slave_sg
[ 437.883908] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 437.896846] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 437.911030] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 437.919907] dma dma0chan0: dwc_prep_slave_sg
[ 437.924187] dma dma0chan0: scanned 1 descriptors on freelist
[ 437.929857] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 437.952854] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 437.968437] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 437.976703] dma dma0chan0: dwc_prep_slave_sg
[ 437.980974] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 437.989640] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 437.997044] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 438.005662] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 438.012373] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 438.035909] ata3.00: configured for UDMA/33
[ 438.040151] ata3.00: device reported invalid CHS sector 0
[ 438.053849] ata3: EH complete
[ 438.061582] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 438.070475] dma dma0chan0: dwc_prep_slave_sg
[ 438.074752] dma dma0chan0: scanned 1 descriptors on freelist
[ 438.080422] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xeccbc100, count: 1 addr: 0xfffffffff6a18400
[ 469.099640] ata3: lost interrupt (Status 0x50)
[ 469.105906] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 469.113811] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.123963] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 469.131081] ata3.00: failed command: READ DMA EXT
[ 469.136678] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 469.136678] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 469.151338] ata3.00: status: { DRDY }
[ 469.155802] ata3: hard resetting link
[ 469.159513] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 469.168868] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 469.186711] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 469.201244] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 469.211094] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 469.218996] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 469.429625] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 469.437490] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.453617] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.466600] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.487350] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.507627] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.520600] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.533599] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.546600] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.556060] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 469.563960] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 469.574223] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.592059] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 469.607971] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.615843] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.626162] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.634089] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 469.644149] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 469.652151] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.662367] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 469.670276] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.680345] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 469.695124] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.710080] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 469.717966] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 469.732138] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 469.741018] dma dma0chan0: dwc_prep_slave_sg
[ 469.745298] dma dma0chan0: scanned 1 descriptors on freelist
[ 469.750967] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 469.764704] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 469.780283] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 469.788552] dma dma0chan0: dwc_prep_slave_sg
[ 469.792831] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 469.801491] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 469.808892] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 469.817510] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 469.824213] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 469.857032] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 469.871310] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 469.879577] dma dma0chan0: dwc_prep_slave_sg
[ 469.883856] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 469.896676] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 469.910866] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 469.919742] dma dma0chan0: dwc_prep_slave_sg
[ 469.924022] dma dma0chan0: scanned 1 descriptors on freelist
[ 469.929692] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 469.959892] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 469.975467] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 469.983734] dma dma0chan0: dwc_prep_slave_sg
[ 469.988013] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 469.996671] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 470.004075] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 470.012693] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 470.019404] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 470.031684] ata3.00: configured for UDMA/33
[ 470.038761] ata3.00: device reported invalid CHS sector 0
[ 470.051709] ata3: EH complete
[ 470.059042] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 470.067940] dma dma0chan0: dwc_prep_slave_sg
[ 470.072216] dma dma0chan0: scanned 1 descriptors on freelist
[ 470.077886] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xeccbc100, count: 1 addr: 0xfffffffff6a18400
[ 501.099526] ata3: lost interrupt (Status 0x50)
[ 501.105373] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 501.119350] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.127253] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 501.136130] ata3.00: failed command: READ DMA EXT
[ 501.140918] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 501.140918] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 501.156506] ata3.00: status: { DRDY }
[ 501.160214] ata3: hard resetting link
[ 501.164840] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 501.172730] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 501.182726] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 501.190709] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 501.210507] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 501.224230] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 501.432484] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 501.440361] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.456468] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.469460] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.482460] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.495460] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.518498] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.531461] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.544459] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.553900] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 501.561798] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 501.571928] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.579845] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 501.591418] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.599329] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.616546] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.632061] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 501.639938] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 501.650238] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.658335] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 501.668374] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.676291] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 501.684064] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.691970] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 501.702025] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 501.716212] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 501.725089] dma dma0chan0: dwc_prep_slave_sg
[ 501.729369] dma dma0chan0: scanned 1 descriptors on freelist
[ 501.735039] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 501.757141] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 501.772724] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 501.780991] dma dma0chan0: dwc_prep_slave_sg
[ 501.785269] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 501.793936] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 501.801340] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 501.809958] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 501.816668] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 501.840290] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 501.854564] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 501.862832] dma dma0chan0: dwc_prep_slave_sg
[ 501.867110] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 501.887543] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 501.901734] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 501.910610] dma dma0chan0: dwc_prep_slave_sg
[ 501.914889] dma dma0chan0: scanned 1 descriptors on freelist
[ 501.920559] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 501.943200] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 501.958783] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 501.967050] dma dma0chan0: dwc_prep_slave_sg
[ 501.971329] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 501.979988] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 501.987390] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 501.996008] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 502.002719] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 502.022570] ata3.00: configured for UDMA/33
[ 502.035525] ata3.00: device reported invalid CHS sector 0
[ 502.042428] ata3: EH complete
[ 502.045766] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 502.054647] dma dma0chan0: dwc_prep_slave_sg
[ 502.058925] dma dma0chan0: scanned 1 descriptors on freelist
[ 502.064596] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xeccbc100, count: 1 addr: 0xfffffffff6a18400
[ 533.099356] ata3: lost interrupt (Status 0x50)
[ 533.104804] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 533.112690] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.122917] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 533.130049] ata3.00: failed command: READ DMA EXT
[ 533.135721] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 533.135721] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 533.150381] ata3.00: status: { DRDY }
[ 533.155044] ata3: hard resetting link
[ 533.158759] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 533.168405] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 533.186252] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 533.200680] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 533.210826] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 533.218727] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 533.429335] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 533.437194] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.453325] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.466320] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.488903] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.507347] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.520320] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.533321] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.546320] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.555769] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 533.563663] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 533.573788] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.591624] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 533.607598] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.615468] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.625665] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.633590] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 533.643633] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 533.651618] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.661905] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 533.669812] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.679884] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 533.694853] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.709624] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 533.717512] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 533.731686] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 533.740566] dma dma0chan0: dwc_prep_slave_sg
[ 533.744846] dma dma0chan0: scanned 1 descriptors on freelist
[ 533.750515] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 533.765418] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 533.780996] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 533.789264] dma dma0chan0: dwc_prep_slave_sg
[ 533.793542] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 533.802216] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 533.809620] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 533.818238] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 533.824941] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 533.857470] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 533.871743] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 533.880010] dma dma0chan0: dwc_prep_slave_sg
[ 533.884289] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 533.897273] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 533.911464] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 533.920341] dma dma0chan0: dwc_prep_slave_sg
[ 533.924620] dma dma0chan0: scanned 1 descriptors on freelist
[ 533.930290] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 533.952441] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 533.968019] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 533.976286] dma dma0chan0: dwc_prep_slave_sg
[ 533.980564] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 533.989221] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 533.996626] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 534.005244] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 534.011954] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 534.036587] ata3.00: configured for UDMA/33
[ 534.040856] ata3.00: device reported invalid CHS sector 0
[ 534.055422] ata3: EH complete
[ 534.062072] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 534.070969] dma dma0chan0: dwc_prep_slave_sg
[ 534.075245] dma dma0chan0: scanned 1 descriptors on freelist
[ 534.080915] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xeccbc100, count: 1 addr: 0xfffffffff6a18400
[ 565.099237] ata3: lost interrupt (Status 0x50)
[ 565.105522] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 565.113431] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.123701] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 565.130826] ata3.00: failed command: READ DMA EXT
[ 565.136537] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 565.136537] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 565.151207] ata3.00: status: { DRDY }
[ 565.155661] ata3: hard resetting link
[ 565.159378] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 565.168741] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 565.176643] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 565.194246] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 565.211221] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 565.219087] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 565.430206] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 565.438070] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.454200] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.468182] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.481180] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.504219] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.517180] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.530180] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.543180] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.552628] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 565.560542] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 565.570672] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.578586] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 565.597256] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.612905] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.620791] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.631007] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 565.638924] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 565.649036] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.657128] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 565.667356] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.675246] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 565.683024] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.690934] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 565.709268] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 565.723461] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 565.732337] dma dma0chan0: dwc_prep_slave_sg
[ 565.736617] dma dma0chan0: scanned 1 descriptors on freelist
[ 565.742286] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 565.763448] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 565.779025] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 565.787292] dma dma0chan0: dwc_prep_slave_sg
[ 565.791572] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 565.800224] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 565.807632] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 565.816250] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 565.822953] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 565.842312] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 565.856586] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 565.864853] dma dma0chan0: dwc_prep_slave_sg
[ 565.869123] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 565.894502] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 565.908695] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 565.917570] dma dma0chan0: dwc_prep_slave_sg
[ 565.921850] dma dma0chan0: scanned 1 descriptors on freelist
[ 565.927520] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 565.949278] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 565.964859] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 565.973126] dma dma0chan0: dwc_prep_slave_sg
[ 565.977404] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 565.986056] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 565.993457] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 566.002075] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 566.008777] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 566.033344] ata3.00: configured for UDMA/33
[ 566.037589] ata3.00: device reported invalid CHS sector 0
[ 566.051290] ata3: EH complete
[ 566.058919] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 566.067818] dma dma0chan0: dwc_prep_slave_sg
[ 566.072094] dma dma0chan0: scanned 1 descriptors on freelist
[ 566.077764] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xeccbc100, count: 1 addr: 0xfffffffff6a18400
[ 597.099114] ata3: lost interrupt (Status 0x50)
[ 597.107091] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 597.129662] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.150165] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 597.172706] ata3.00: failed command: READ DMA EXT
[ 597.182999] ata3.00: cmd 25/00:08:80:5f:38/00:00:3a:00:00/e0 tag 0 dma 4096 in
[ 597.182999] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 597.220078] ata3.00: status: { DRDY }
[ 597.230758] ata3: hard resetting link
[ 597.242107] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 597.266104] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 597.290050] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000311
[ 597.309051] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 597.327051] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000311
[ 597.343050] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=2 val=val=0x00000310
[ 597.561081] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 597.578597] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.605875] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.622748] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.636040] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.649039] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.662040] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.685082] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.702080] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.713677] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x04050002
[ 597.725996] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x04050002
[ 597.737806] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.750167] sata-dwc 4bffd1000.sata: sata_dwc_enable_interrupts: INTMR = 0x0000000f, ERRMR = 0x0fff0f03
[ 597.763976] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.781071] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.806121] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.828706] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=1 val=val=0x00000000
[ 597.844923] sata-dwc 4bffd1000.sata: sata_dwc_scr_write: id=3 reg=1 val=val=0x00000000
[ 597.857980] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.865895] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=2 val=val=0x00000310
[ 597.886700] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.899237] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 597.905472] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.915084] sata-dwc 4bffd1000.sata: sata_dwc_scr_read: id=3 reg=0 val=val=0x00000113
[ 597.922970] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 597.937145] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 597.946025] dma dma0chan0: dwc_prep_slave_sg
[ 597.950305] dma dma0chan0: scanned 1 descriptors on freelist
[ 597.955975] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213c48, count: 1 addr: 0xfffffffff6a18400
[ 597.970160] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 597.985734] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 597.994002] dma dma0chan0: dwc_prep_slave_sg
[ 597.998281] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 598.006942] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 598.014342] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 598.022960] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 598.029662] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 598.061846] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xef)=SET FEATURES qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 598.076117] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 598.084385] dma dma0chan0: dwc_prep_slave_sg
[ 598.088662] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 598.101307] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0xec)=IDENTIFY DEVICE qc tag=31 prot=ATA PIO ap active_tag=0x0000001f ap sactive=0x00000000
[ 598.115490] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 598.124368] dma dma0chan0: dwc_prep_slave_sg
[ 598.128648] dma dma0chan0: scanned 1 descriptors on freelist
[ 598.134317] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xed213bb8, count: 1 addr: 0xfffffffff6a18400
[ 598.157366] sata-dwc 4bffd1000.sata: sata_dwc_qc_issue ap id=3 cmd(0x27)=READ NATIVE MAX ADDRESS EXT qc tag=31 prot=ATA no data ap active_tag=0x0000001f ap sactive=0x00000000
[ 598.172948] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=none n_elem=0
[ 598.181216] dma dma0chan0: dwc_prep_slave_sg
[ 598.185495] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: dma_dwc_xfer_setup returns NULL
[ 598.194160] sata-dwc 4bffd1000.sata: sata_dwc_isr intpr=0x80000080 active_tag=31
[ 598.201565] sata-dwc 4bffd1000.sata: sata_dwc_isr non-NCQ cmd interrupt, protocol: ATA no data
[ 598.210182] sata-dwc 4bffd1000.sata: sata_dwc_qc_complete checkstatus? 1
[ 598.216885] sata-dwc 4bffd1000.sata: QC complete cmd=0x27 status=0x00 ata3: protocol=1
[ 598.241946] ata3.00: configured for UDMA/33
[ 598.246234] ata3.00: device reported invalid CHS sector 0
[ 598.260358] sd 3:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08
[ 598.276747] sd 3:0:0:0: [sdc] tag#0 Sense Key : 0x5 [current] [descriptor]
[ 598.283767] sd 3:0:0:0: [sdc] tag#0 ASC=0x21 ASCQ=0x4
[ 598.291467] sd 3:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 3a 38 5f 80 00 00 08 00
[ 598.299112] blk_update_request: I/O error, dev sdc, sector 976772992
[ 598.307321] ata3: EH complete
[ 598.311192] sata-dwc 4bffd1000.sata: sata_dwc_qc_prep_by_tag: port=0 dma dir=from device n_elem=1
[ 598.320082] dma dma0chan0: dwc_prep_slave_sg
[ 598.324359] dma dma0chan0: scanned 1 descriptors on freelist
[ 598.330029] sata-dwc 4bffd1000.sata: dma_dwc_xfer_setup sg: 0xecd3d000, count: 1 addr: 0xfffffffff6a18400

Next message: Brian Norris: "Re: [PATCH v2] mtd: spi-nor: fsl-quadspi: add big-endian support"
Previous message: Andrew Morton: "Re: [PATCH] memory-hotplug: don't BUG() in register_memory_resource()"
In reply to: Måns Rullgård: "Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel"
Next in thread: Måns Rullgård: "Re: [PATCH 1/3] ata: sata_dwc_460ex: use "dmas" DT property to find dma channel"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]