[PATCH v5 1/3] tty: Move serial8250_stop_rx in front of serial8250_start_tx

From: Matwey V. Kornilov
Date: Sat Dec 12 2015 - 06:24:50 EST


Software RS485 emultaion is to be added in the following commit.
serial8250_start_tx will need to refer serial8250_stop_rx.
Move serial8250_stop_rx in front of serial8250_start_tx in order
to avoid function forward declaration.

Signed-off-by: Matwey V. Kornilov <matwey@xxxxxxxxxx>
---
drivers/tty/serial/8250/8250_port.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 0bbf340..8ad0b2d 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1280,6 +1280,19 @@ static void autoconfig_irq(struct uart_8250_port *up)
port->irq = (irq > 0) ? irq : 0;
}

+static void serial8250_stop_rx(struct uart_port *port)
+{
+ struct uart_8250_port *up = up_to_u8250p(port);
+
+ serial8250_rpm_get(up);
+
+ up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
+ up->port.read_status_mask &= ~UART_LSR_DR;
+ serial_port_out(port, UART_IER, up->ier);
+
+ serial8250_rpm_put(up);
+}
+
static inline void __stop_tx(struct uart_8250_port *p)
{
if (p->ier & UART_IER_THRI) {
@@ -1347,19 +1360,6 @@ static void serial8250_unthrottle(struct uart_port *port)
port->unthrottle(port);
}

-static void serial8250_stop_rx(struct uart_port *port)
-{
- struct uart_8250_port *up = up_to_u8250p(port);
-
- serial8250_rpm_get(up);
-
- up->ier &= ~(UART_IER_RLSI | UART_IER_RDI);
- up->port.read_status_mask &= ~UART_LSR_DR;
- serial_port_out(port, UART_IER, up->ier);
-
- serial8250_rpm_put(up);
-}
-
static void serial8250_disable_ms(struct uart_port *port)
{
struct uart_8250_port *up =
--
2.6.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/