Re: [PATCH linux-next (v3) 1/2] reset: Add brcm,bcm6345-reset device tree binding

From: Rob Herring
Date: Thu Dec 10 2015 - 22:47:31 EST


On Thu, Dec 10, 2015 at 09:28:38PM +0000, Simon Arlott wrote:
> Add device tree binding for the BCM6345 soft reset controller.
>
> The BCM6345 contains a soft-reset controller activated by setting
> a bit (that must previously have been cleared).
>
> Signed-off-by: Simon Arlott <simon@xxxxxxxxxxx>
> ---
> v3: Resend. Example has changed because usbh now has two compatible
> strings and uses a power domain instead of a regulator.

Not really all that important to this binding definition, so you can
keep my ack.

>
> v2: Renamed to bcm6345, removed "mask" property.
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
>
> .../bindings/reset/brcm,bcm6345-reset.txt | 33 ++++++++++++++++++++++
> 1 file changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
>
> diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
> new file mode 100644
> index 0000000..0313040
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/brcm,bcm6345-reset.txt
> @@ -0,0 +1,33 @@
> +Broadcom BCM6345 reset controller
> +
> +The BCM6345 contains a basic soft reset controller in the perf register
> +set which resets components using a bit in a register.
> +
> +Please also refer to reset.txt in this directory for common reset
> +controller binding usage.
> +
> +Required properties:
> +- compatible: Should be "brcm,bcm<soc>-reset", "brcm,bcm6345-reset"
> +- regmap: The register map phandle
> +- offset: Offset in the register map for the reset register (in bytes)
> +- #reset-cells: Must be set to 1
> +
> +Example:
> +
> +periph_soft_rst: reset-controller {
> + compatible = "brcm,bcm63168-reset", "brcm,bcm6345-reset";
> + regmap = <&periph_cntl>;
> + offset = <0x10>;
> +
> + #reset-cells = <1>;
> +};
> +
> +usbh: usbphy@10002700 {
> + compatible = "brcm,bcm63168-usbh", "brcm,bcm6328-usbh";
> + reg = <0x10002700 0x38>;
> + clocks = <&periph_clk 13>, <&timer_clk 18>;
> + resets = <&periph_soft_rst 6>;
> + power-domains = <&misc_iddq_ctrl 4>;
> + #phy-cells = <0>;
> +};
> +
> --
> 2.1.4
>
> --
> Simon Arlott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/