Re: [PATCH] cpufreq: tegra: add regulator dependency for T124

From: Mark Brown
Date: Wed Dec 09 2015 - 15:10:34 EST


On Wed, Dec 09, 2015 at 05:33:33PM +0000, Jon Hunter wrote:
> On 09/12/15 14:47, Mark Brown wrote:

> > If changes implemented by the clock driver are trashing the regulator
> > settings I would expect the clock driver to be responsible for fixing
> > things up rather than another driver that happens to use the clock. I'd
> > also expect some kind of internal documentation explaining what's going
> > on, and possibly

> Yes, the DFLL clock driver could restore the voltage, however, that
> does not guarantee that the voltage is still sufficient for the other
> clock source.

But the code we've got won't do that either - it'l just set the voltage
to whatever the last thing the regulator API had that might have been
within its constraints.

> > Setting the voltage you've read back sounds broken, if the hardware
> > might randomly change things how do you know the settings we read were
> > sane? Shouldn't we know what voltage range the device requires in a
> > given mode and set that - that's much more normal?

> The hardware will not randomly change the voltage until the DFLL is
> enabled and so you would have to do this before.

I'm not clear that there's even a guarantee that the kernel will ever
have seen this configuration, consider for example what happens if
someone uses kexec?

> Yes, setting the frequency and voltage as defined by a given operating
> mode would make sense. However, I am not sure we have those defined in
> the kernel for this PLL and would have to be added.

I think given how you're describing the hardware that this will be
required in order to provide something robust (and also to get the best
power savings from the hardware).

> I was thinking that during boot we could read the default voltage and
> frequency set by the bootloader and use this as it should not be
> changing dynamically at this point because the cpufreq driver has not
> been activated yet.

I'm a bit confused here, we're talking about a change to the cpufreq
driver here aren't we? Or alternatively why are we manipulating the
clock tree like this if we don't yet have support for the hardware?

Attachment: signature.asc
Description: PGP signature