[PATCH linux-next 4/5] Documentation: atmel-quadspi: add binding file for Atmel QSPI driver

From: Cyrille Pitchen
Date: Mon Dec 07 2015 - 09:10:38 EST


This patch documents the DT bindings for the driver of the Atmel QSPI
controller embedded inside sama5d2x SoCs.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxx>
---
.../devicetree/bindings/mtd/atmel-quadspi.txt | 32 ++++++++++++++++++++++
1 file changed, 32 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/atmel-quadspi.txt

diff --git a/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
new file mode 100644
index 000000000000..e81f20f9faf1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/atmel-quadspi.txt
@@ -0,0 +1,32 @@
+* Atmel Quad Serial Peripheral Interface (QSPI)
+
+Required properties:
+- compatible: Should be "atmel,sama5d2-qspi".
+- reg: Should contain the locations and lengths of the base registers
+ and the mapped memory.
+- reg-names: Should contain the resource reg names:
+ - qspi_base: configuration register address space
+ - qspi_mmap: memory mapped address space
+- interrupts: Should contain the interrupt for the device.
+- clocks: The phandle of the clock needed by the QSPI controller.
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+
+Example:
+
+spi@f0020000 {
+ compatible = "atmel,sama5d2-qspi";
+ reg = <0xf0020000 0x100>, <0xd0000000 0x8000000>;
+ reg-names = "qpsi_base", "qspi_mmap";
+ interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
+ clocks = <&spi0_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ status = "okay";
+
+ m25p80@0 {
+ ...
+ };
+};
--
1.8.2.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/