Re: [PATCH v3 03/18] clocksource: Add NPS400 timers driver
From: Daniel Lezcano
Date: Fri Dec 04 2015 - 04:13:37 EST
On 12/01/2015 02:02 PM, Noam Camus wrote:
From: Noam Camus <noamc@xxxxxxxxxx>
Add internal tick generator which is shared by all cores.
Each cluster of cores view it through dedicated address.
This is used for SMP system where all CPUs synced by same
clock source.
Signed-off-by: Noam Camus <noamc@xxxxxxxxxx>
Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: John Stultz <john.stultz@xxxxxxxxxx>
Acked-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>
[ ... ]
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 56bd16e..20969b0 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_CLKSRC_QCOM) += qcom-timer.o
obj-$(CONFIG_MTK_TIMER) += mtk_timer.o
obj-$(CONFIG_CLKSRC_PISTACHIO) += time-pistachio.o
obj-$(CONFIG_CLKSRC_TI_32K) += timer-ti-32k.o
+obj-$(CONFIG_ARC_PLAT_EZNPS) += timer-nps.o
CONFIG_CLKSRC_NPS
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
diff --git a/drivers/clocksource/timer-nps.c b/drivers/clocksource/timer-nps.c
new file mode 100644
index 0000000..ef8f287
--- /dev/null
+++ b/drivers/clocksource/timer-nps.c
@@ -0,0 +1,63 @@
+/*
+ * Copyright(c) 2015 EZchip Technologies.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ */
+
+#include <linux/clocksource.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <plat/ctop.h>
Why do you need this header ? nps_host_reg ?
We prevent to include headers from <plat> in the drivers directory. You
should find a way to get rid of it.
+#define NPS_MSU_TICK_LOW 0xC8
+#define NPS_CLUSTER_OFFSET 8
+#define NPS_CLUSTER_NUM 16
+
+static void *nps_msu_reg_low_addr[NPS_CLUSTER_NUM] __read_mostly;
Perhaps a small optimization...
static DEFINE_PER_CPU_READ_MOSTLY(void __iomem *, baseaddr);
static cycle_t nps_clksrc_read(struct clocksource *clksrc)
{
void __iomem *base = per_cpu(baseaddr, raw_smp_processor_id());
return (cycle_t)ioread32be(base);
}
and in the init function:
for_each_cpu(cpu) {
per_cpu(baseaddr, cpu) = nps_host_reg(cpu,
NPS_MSU_BLKID,
NPS_MSU_TICK_LOW
}
+static cycle_t nps_clksrc_read(struct clocksource *clksrc)
+{
+ int cluster = raw_smp_processor_id() >> NPS_CLUSTER_OFFSET;
+
+ return (cycle_t)ioread32be(nps_msu_reg_low_addr[cluster]);
AFAICT, there is a memory barrier with ioread32be, are you really sure
we have to use it in this code path ?
+}
+
+static struct clocksource nps_counter = {
+ .name = "EZnps-tick",
+ .rating = 301,
+ .read = nps_clksrc_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init nps_setup_clocksource(struct device_node *node)
+{
+ struct clocksource *clksrc = &nps_counter;
+ unsigned long rate, dt_root;
+ int ret, cluster;
+
+ for (cluster = 0; cluster < NPS_CLUSTER_NUM; cluster++)
+ nps_msu_reg_low_addr[cluster] =
+ nps_host_reg((cluster << NPS_CLUSTER_OFFSET),
+ NPS_MSU_BLKID, NPS_MSU_TICK_LOW);
+
+ dt_root = of_get_flat_dt_root();
+ rate = (u32)of_get_flat_dt_prop(dt_root, "clock-frequency", NULL);
I don't get why this is done this way. The Kconfig option help says the
clocksource rate is 1GHz but in the DT the clock is 88MHz.
It would be cleaner to define a fixed clock and then add a phandle in
the DT.
timer_clk: timer_clk {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <123456789>;
};
timer {
compatible = "ezchip,nps400-timer";
clocks = <&timer_clk>;
}
That will result in the same code than the other drivers.
clk = of_clk_get(np, 0);
if (IS_ERR(clk)) {
pr_err("%s: invalid clock\n", np->full_name);
return;
}
rate = clk_get_rate(clk);
+ ret = clocksource_register_hz(clksrc, rate);
+ if (ret)
+ pr_err("Couldn't register clock source.\n");
+}
+
+CLOCKSOURCE_OF_DECLARE(nps_400, "ezchip,nps400-timer",
+ nps_setup_clocksource);
--
<http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/