Re: [PATCH 0/2] ARM: dts: Use MMC pwrseq instead regulators for IGEP WiFi init

From: Tony Lindgren
Date: Thu Dec 03 2015 - 13:16:33 EST


* Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> [151203 10:03]:
> Hello,
>
> This series converts the IGEPv2 (IGEP0020) and IGEP COM Module (IGEP0030)
> Device Tree to use the MMC power sequence provider to initialize the SDIO
> WiFi chip instead of using fake fixed regulators to just toggle the Reset
> and Power pins in the chip.
>
> The patches were tested on an DM3730 IGEPv2 board but the IGEP COM Module
> is the same with regard to the SDIO WiFi so it should be safe to land too.
>
> The IGEPv2 Rev.F and the IGEP COM Module Rev.G DTS were not converted due
> using a different WiFi chip (wlcore instead of libertas) than the one in
> the board I've access to test so I preferred to leave those untouched.

Do you have some solution for the start-up latency issue?

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/