Re: [PATCH v2 2/3] ARM: dts: sun8i: Add Allwinner A83T dtsi

From: Maxime Ripard
Date: Tue Dec 01 2015 - 03:59:48 EST


Hi!

On Mon, Nov 30, 2015 at 02:09:14AM +0800, Vishnu Patekar wrote:
> >> + reg = <0x01c20800 0x400>;
> >> + clocks = <&osc24M>;
> >> + gpio-controller;
> >> + interrupt-controller;
> >> + #interrupt-cells = <3>;
> >> + #gpio-cells = <3>;
> >> +
> >> + i2c0_pins_a: i2c0@0 {
> >> + allwinner,pins = "PH0", "PH1";
> >> + allwinner,function = "i2c0";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + i2c1_pins_a: i2c1@0 {
> >> + allwinner,pins = "PH2", "PH3";
> >> + allwinner,function = "i2c1";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + i2c2_pins_a: i2c2@0 {
> >> + allwinner,pins = "PH4", "PH5";
> >> + allwinner,function = "i2c2";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + mmc0_pins_a: mmc0@0 {
> >> + allwinner,pins = "PF0", "PF1", "PF2",
> >> + "PF3", "PF4", "PF5";
> >> + allwinner,function = "mmc0";
> >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + mmc1_pins_a: mmc1@0 {
> >> + allwinner,pins = "PG0", "PG1", "PG2",
> >> + "PG3", "PG4", "PG5";
> >> + allwinner,function = "mmc1";
> >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + mmc2_8bit_pins: mmc2_8bit {
> >> + allwinner,pins = "PC5", "PC6", "PC8",
> >> + "PC9", "PC10", "PC11",
> >> + "PC12", "PC13", "PC14",
> >> + "PC15";
> >> + allwinner,function = "mmc2";
> >> + allwinner,drive = <SUN4I_PINCTRL_30_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + uart0_pins_a: uart0@0 {
> >> + allwinner,pins = "PF2", "PF4";
> >> + allwinner,function = "uart0";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >> +
> >> + uart0_pins_b: uart0@1 {
> >> + allwinner,pins = "PB9", "PB10";
> >> + allwinner,function = "uart0";
> >> + allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> >> + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> >> + };
> >
> > Are you going to use all these options?
>
> Not, only uart0_pins_a and uart0_pins_b and mmc0_pins_a will be used for now.
> As, these are not enabled, I don't see any harm in keeping those here.

It bloats the DT for no particular reason.

> Let me know in case you want to remove, I'll do it.

Yes, please.

Thanks!
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature