Re: [PATCH] arm64: calculate the various pages number to show

From: zhong jiang
Date: Fri Nov 27 2015 - 03:41:44 EST


On 2015/11/26 23:49, Mark Rutland wrote:
> On Thu, Nov 26, 2015 at 11:05:32PM +0800, zhong jiang wrote:
>> On 2015/11/25 23:04, Mark Rutland wrote:
>>> On Wed, Nov 25, 2015 at 09:41:12PM +0800, zhongjiang wrote:
>>>> This patch add the interface to show the number of 4KB or 64KB page,
>>>> aims to statistics the number of different types of pages.
>>>
>>> What is this useful for? Why do we want it?
>>>
>>> What does it account for, just the swapper?
>>>
>>
>> The patch is wirtten when I was in backport set_memory_ro. It can be used to
>> detect whether there is a large page spliting and merging. large page will
>> significantly reduce the TLB miss, and improve the system performance.
>
> Ok, but typically the user isn't going to be able to do much with this
> information. It feels more like something that should be in the page
> table dump code (where we can calculate the values as we walk the
> tables).
>
> What is it intended to account for?
>
> The entire swapper?
>
> Just the linear mapping?

yes, It is used only to the direct mapping, calculating the number of
various pages just like the x86.
>
>>>> Signed-off-by: zhongjiang <zhongjiang@xxxxxxxxxx>
>>>> ---
>>>> arch/arm64/include/asm/pgtable-types.h | 24 ++++++++++++++++++++++++
>>>> arch/arm64/mm/mmu.c | 28 ++++++++++++++++++++++++++++
>>>> arch/arm64/mm/pageattr.c | 31 +++++++++++++++++++++++++++++++
>>>> 3 files changed, 83 insertions(+), 0 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/include/asm/pgtable-types.h b/arch/arm64/include/asm/pgtable-types.h
>>>> index 2b1bd7e..aa52546 100644
>>>> --- a/arch/arm64/include/asm/pgtable-types.h
>>>> +++ b/arch/arm64/include/asm/pgtable-types.h
>>>> @@ -86,6 +86,30 @@ typedef pteval_t pgprot_t;
>>>>
>>>> #endif /* STRICT_MM_TYPECHECKS */
>>>>
>>>> +struct seq_file;
>>>> +extern void arch_report_meminfo(struct seq_file *m);
>>>> +
>>>> +enum pg_level {
>>>> + PG_LEVEL_NONE,
>>>> +#ifdef CONFIG_ARM64_4K_PAGES
>>>> + PG_LEVEL_4K,
>>>> + PG_LEVEL_2M,
>>>> + PG_LEVEL_1G,
>>>> +#else
>>>> + PG_LEVEL_64K,
>>>> + PG_LEVEL_512M,
>>>> +#endif
>>>> + PG_LEVEL_NUM
>>>> +};
>>>
>>> This doesn't account for 16K pages, and it means each call site has to
>>> handle the various page sizes directly.
>>>
>>> It would be better to simply count PTE/PMD/PUD/PGD, then handle the size
>>> conversion at the end when logging.
>>>
>>
>> yes, now I only consider the 4kb and 64kb. if the patch is approved ,I will
>> improve it.
>> each call site need two different varialbes to statistics, aiming to distinguish
>> diffent pages. I think it will no more simple.
>
> I don't follow.
>
> Rather than having:
>
> #if defined(CONFIG_ARM64_4K_PAGES)
> update_page_count(PG_LEVEL_4K, i);
> #else if defined(CONFIG_ARM64_16K_PAGES)
> update_page_count(PG_LEVEL_16K, i);
> #else if defined(CONFIG_ARM64_64K_PAGES)
> update_page_count(PG_LEVEL_64K, i);
> #else
> #error PAGE SIZE UNKNOWN
> #endif
>
> You'd have:
>
> update_page_count(PG_LEVEL_PTE, i)
>
> The latter is clearly simpler.
>
> See the end of this email for what the other end would look like.
>
>>>> diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
>>>> index 7a5ff11..c1888b9 100644
>>>> --- a/arch/arm64/mm/pageattr.c
>>>> +++ b/arch/arm64/mm/pageattr.c
>>>> @@ -15,12 +15,43 @@
>>>> #include <linux/module.h>
>>>> #include <linux/sched.h>
>>>>
>>>> +#include <linux/seq_file.h>
>>>> #include <asm/pgalloc.h>
>>>> #include <asm/pgtable.h>
>>>> #include <asm/tlbflush.h>
>>>>
>>>> #include "mm.h"
>>>>
>>>> +static unsigned long direct_pages_count[PG_LEVEL_NUM];
>>>
>>> This doesn't match reality by the time we start executing the kernel,
>>> given we created page tables in head.S.
>
> As I mentioned here, I don't think that the account is correct, but it
> depends on what you're trying to account for.
>
>>>> +void update_page_count(int level, unsigned long pages)
>>>> +{
>>>> + direct_pages_count[level] += pages;
>>>> +}
>>>> +
>>>> +void split_page_count(int level)
>>>> +{
>>>> + direct_pages_count[level]--;
>>>> + direct_pages_count[level-1] += PTRS_PER_PTE;
>>>> +}
>>>> +
>>>> +void arch_report_meminfo(struct seq_file *m)
>>>> +{
>>>> +#ifdef CONFIG_ARM64_4K_PAGES
>>>> + seq_printf(m, "DirectMap4k: %8lu kB\n",
>>>> + direct_pages_count[PG_LEVEL_4K] << 2);
>>>> + seq_printf(m, "DirectMap2M: %8lu kB\n",
>>>> + direct_pages_count[PG_LEVEL_2M] << 11);
>>>> + seq_printf(m, "DirectMap1G: %8lu kB\n",
>>>> + direct_pages_count[PG_LEVEL_1G] << 20);
>>>> +#else
>>>> + seq_printf(m, "DirectMap64k: %8lu kB\n",
>>>> + direct_pages_count[PG_LEVEL_64K] << 6);
>>>> + seq_printf(m, "DirectMap512M: %8lu kB\n",
>>>> + direct_pages_count[PG_LEVEL_512M] << 19);
>>>> +#endif
>>>> +}
>>>
>>> You could dynamuically determine the sizes here for each field, and not
>>> have to have #ifdefs.>
>>
>> I don't understand what you mean. I think it can be more readable and operability.
>
> Assuming you use PGLEVEL_{PTE,PMD,PUD,PGD}, you can have this work for
> any size of page and number of levels using something like:
>
> void arch_report_meminfo(struct seq_file *m)
> {
> seq_printf(m, "DirectMap%dk: %8lu kB\n",
> PAGE_SIZE / SZ_1K,
> direct_pages_count[PG_LEVEL_PTE] * PAGE_SIZE / SZ_1K);
>
> #if CONFIG_PGTABLE_LEVELS > 2
> seq_printf(m, "DirectMap%dM: %8lu kB\n",
> PMD_SIZE / SZ_1M,
> direct_pages_count[PG_LEVEL_PMD] * PUD_SIZE / SZ_1K);
>
> #endif
>
> #if CONFIG_PGTABLE_LEVELS > 3
> seq_printf(m, "DirectMap%dG: %8lu kB\n",
> PUD_SIZE / SZ_1G,
> direct_pages_count[PG_LEVEL_PUD] * PUD_SIZE / SZ_1K);
>
> #endif
> }
>
> I think that's far more readable and maintainable.
>
> The above may not cover all cases; I'm not sure if you can have a huge
> PGD entry in some configuration. If we can, it should be easy to fix up
> for.
>
> Thanks,
> Mark.
>
>

OK, It seems to be better . then, I will improve it.
Thank you for your advice.

Thanks
zhongjiang







--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/