Re: [PATCH RFT] arm64: kasan: Make KASAN work with 16K pages + 48 bit VA

From: Andrey Ryabinin
Date: Thu Nov 26 2015 - 11:40:52 EST


On 11/26/2015 07:21 PM, Mark Rutland wrote:
> On Thu, Nov 26, 2015 at 06:47:36PM +0300, Andrey Ryabinin wrote:
>>
>>
>> On 11/26/2015 05:48 PM, Mark Rutland wrote:
>>> Hi,
>>>
>>> On Thu, Nov 26, 2015 at 04:14:46PM +0300, Andrey Ryabinin wrote:
>>>> Currently kasan assumes that shadow memory covers one or more entire PGDs.
>>>> That's not true for 16K pages + 48bit VA space, where PGDIR_SIZE is bigger
>>>> than the whole shadow memory.
>>>>
>>>> This patch tries to fix that case.
>>>> clear_page_tables() is a new replacement of clear_pgs(). Instead of always
>>>> clearing pgds it clears top level page table entries that entirely belongs
>>>> to shadow memory.
>>>> In addition to 'tmp_pg_dir' we now have 'tmp_pud' which is used to store
>>>> puds that now might be cleared by clear_page_tables.
>>>>
>>>> Reported-by: Suzuki K. Poulose <Suzuki.Poulose@xxxxxxx>
>>>> Signed-off-by: Andrey Ryabinin <aryabinin@xxxxxxxxxxxxx>
>>>> ---
>>>>
>>>> *** THIS is not tested with 16k pages ***
>>>>
>>>> arch/arm64/mm/kasan_init.c | 87 ++++++++++++++++++++++++++++++++++++++++------
>>>> 1 file changed, 76 insertions(+), 11 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/mm/kasan_init.c b/arch/arm64/mm/kasan_init.c
>>>> index cf038c7..ea9f92a 100644
>>>> --- a/arch/arm64/mm/kasan_init.c
>>>> +++ b/arch/arm64/mm/kasan_init.c
>>>> @@ -22,6 +22,7 @@
>>>> #include <asm/tlbflush.h>
>>>>
>>>> static pgd_t tmp_pg_dir[PTRS_PER_PGD] __initdata __aligned(PGD_SIZE);
>>>> +static pud_t tmp_pud[PAGE_SIZE/sizeof(pud_t)] __initdata __aligned(PAGE_SIZE);
>>>>
>>>> static void __init kasan_early_pte_populate(pmd_t *pmd, unsigned long addr,
>>>> unsigned long end)
>>>> @@ -92,20 +93,84 @@ asmlinkage void __init kasan_early_init(void)
>>>> {
>>>> BUILD_BUG_ON(KASAN_SHADOW_OFFSET != KASAN_SHADOW_END - (1UL << 61));
>>>> BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE));
>>>> - BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
>>>> + BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PUD_SIZE));
>>>
>>> We also assume that even in the shared PUD case, the shadow region falls
>>> within the same PGD entry, or we would need more than a single tmp_pud.
>>>
>>> It would be good to test for that.
>>>
>>
>> Something like this:
>>
>> #define KASAN_SHADOW_SIZE (KASAN_SHADOW_END - KASAN_SHADOW_START)
>>
>> BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGD_SIZE)
>> && !((PGDIR_SIZE > KASAN_SHADOW_SIZE)
>> && IS_ALIGNED(KASAN_SHADOW_END, PUD_SIZE)));
>
> I was thinking something more like:
>
> BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PUD_SIZE);
> BUILD_BUG_ON(KASAN_SHADOW_START >> PGDIR_SHIFT !=
> KASAN_SHADOW_END >> PGDIR_SHIFT);
>
>>>> + if (!pud_none(*pud))
>>>> + clear_pmds(pud, addr, next);
>>>
>>> I don't understand this. The KASAN shadow region is PUD_SIZE aligned at
>>> either end, so KASAN should never own a partial pud entry like this.
>>>
>>> Regardless, were this case to occur, surely we'd be clearing pmd entries
>>> in the active page tables? We didn't copy anything at the pmd level.
>>>
>>> That doesn't seem right.
>>>
>>
>> Just take a look at p?d_clear() macroses, under CONFIG_PGTABLE_LEVELS=2 for example.
>> pgd_clear() and pud_clear() is nops, and pmd_clear() is actually clears pgd.
>
> I see. Thanks for pointing that out.
>
> I detest the weird folding behaviour we have in the p??_* macros. It
> violates least surprise almost every time.
>
>> I could replace p?d_clear() with set_p?d(p?d, __p?d(0)).
>> In that case going down to pmds is not needed, set_p?d() macro will do it for us.
>
> I think it would be simpler to rely on the fact that we only use puds
> with 4 levels of table (and hence the p??_* macros will operate at the
> levels their names imply).
>

It's not only about puds.
E.g. if we need to clear PGD with 2-level page tables, than we need to call pmd_clear().

So we should either leave this code as is, or switch to set_pgd/set_pud.


> We can verify that at build time with:
>
> BUILD_BUG_ON(CONFIG_PGTABLE_LEVELS != 4 &&
> (!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE) ||
> !IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE)));
>
>>>> +static void copy_pagetables(void)
>>>> +{
>>>> + pgd_t *pgd = tmp_pg_dir + pgd_index(KASAN_SHADOW_START);
>>>> +
>>>> + memcpy(tmp_pg_dir, swapper_pg_dir, sizeof(tmp_pg_dir));
>>>> +
>>>> /*
>>>> - * Remove references to kasan page tables from
>>>> - * swapper_pg_dir. pgd_clear() can't be used
>>>> - * here because it's nop on 2,3-level pagetable setups
>>>> + * If kasan shadow shares PGD with other mappings,
>>>> + * clear_page_tables() will clear puds instead of pgd,
>>>> + * so we need temporary pud table to keep early shadow mapped.
>>>> */
>>>> - for (; start < end; start += PGDIR_SIZE)
>>>> - set_pgd(pgd_offset_k(start), __pgd(0));
>>>> + if (PGDIR_SIZE > KASAN_SHADOW_END - KASAN_SHADOW_START) {
>>>> + pud_t *pud;
>>>> + pmd_t *pmd;
>>>> + pte_t *pte;
>>>> +
>>>> + memcpy(tmp_pud, pgd_page_vaddr(*pgd), sizeof(tmp_pud));
>>>> +
>>>> + pgd_populate(&init_mm, pgd, tmp_pud);
>>>> + pud = pud_offset(pgd, KASAN_SHADOW_START);
>>>> + pmd = pmd_offset(pud, KASAN_SHADOW_START);
>>>> + pud_populate(&init_mm, pud, pmd);
>>>> + pte = pte_offset_kernel(pmd, KASAN_SHADOW_START);
>>>> + pmd_populate_kernel(&init_mm, pmd, pte);
>>>
>>> I don't understand why we need to do anything below the pud level here.
>>> We only copy down to the pud level, and we already initialised the
>>> shared ptes and pmds earlier.
>>>
>>> Regardless of this patch, we currently initialise the shared tables
>>> repeatedly, which is redundant after the first time we initialise them.
>>> We could improve that.
>>>
>>
>> Sure, just pgd_populate() will work here, because this code is only for 16K+48-bit,
>> which has 4-level pagetables.
>> But it wouldn't work if 16k+48-bit would have > 4-level.
>> Because pgd_populate() in nop in such case, so we need to go down to actually set 'tmp_pud'
>
> I don't follow.
>
> 16K + 48-bit will always require 4 levels given the page table format.
> We never have more than 4 levels.
>

Oh, it should be '< 4' of course.
Yes, 16K + 48-bit is always 4-levels, but I tried to not rely on this here.

But since we can rely on 4-levels here, I'm gonna leave only pgd_populate() and add you BUILD_BUG_ON().


> Thanks,
> Mark.
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/