[PATCH 4/5] thermal: rockchip: Support the RK3228 SoCs in thermal driver

From: Caesar Wang
Date: Wed Nov 25 2015 - 03:00:59 EST


The RK3228 SoCs has one Temperature Sensor, channel 0 is for CPU.

Signed-off-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
---

drivers/thermal/rockchip_thermal.c | 81 ++++++++++++++++++++++++++++++++++++++
1 file changed, 81 insertions(+)

diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index ab236a1..c5079f9 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -153,6 +153,7 @@ struct rockchip_thermal_data {
#define TSADCV2_SHUT_2GPIO_SRC_EN(chn) BIT(4 + (chn))
#define TSADCV2_SHUT_2CRU_SRC_EN(chn) BIT(8 + (chn))

+#define TSADCV1_INT_PD_CLEAR_MASK ~BIT(16)
#define TSADCV2_INT_PD_CLEAR_MASK ~BIT(8)

#define TSADCV2_DATA_MASK 0xfff
@@ -168,6 +169,51 @@ struct tsadc_table {
int temp;
};

+/**
+ * Note:
+ * Code to Temperature mapping of the Temperature sensor is a piece wise linear
+ * curve.Any temperature, code faling between to 2 give temperatures can be
+ * linearly interpolated.
+ * Code to Temperature mapping should be updated based on sillcon results.
+ */
+static const struct tsadc_table v1_code_table[] = {
+ {TSADCV3_DATA_MASK, -40000},
+ {436, -40000},
+ {431, -35000},
+ {426, -30000},
+ {421, -25000},
+ {416, -20000},
+ {411, -15000},
+ {406, -10000},
+ {401, -5000},
+ {395, 0},
+ {390, 5000},
+ {385, 10000},
+ {380, 15000},
+ {375, 20000},
+ {370, 25000},
+ {364, 30000},
+ {359, 35000},
+ {354, 40000},
+ {349, 45000},
+ {343, 50000},
+ {338, 55000},
+ {333, 60000},
+ {328, 65000},
+ {322, 70000},
+ {317, 75000},
+ {312, 80000},
+ {307, 85000},
+ {301, 90000},
+ {296, 95000},
+ {291, 100000},
+ {286, 105000},
+ {280, 110000},
+ {275, 115000},
+ {270, 120000},
+ {264, 125000},
+};
+
static const struct tsadc_table v2_code_table[] = {
{TSADCV2_DATA_MASK, -40000},
{3800, -40000},
@@ -368,6 +414,14 @@ static void rk_tsadcv2_initialize(void __iomem *regs,
regs + TSADCV2_HIGHT_TSHUT_DEBOUNCE);
}

+static void rk_tsadcv1_irq_ack(void __iomem *regs)
+{
+ u32 val;
+
+ val = readl_relaxed(regs + TSADCV2_INT_PD);
+ writel_relaxed(val & TSADCV1_INT_PD_CLEAR_MASK, regs + TSADCV2_INT_PD);
+}
+
static void rk_tsadcv2_irq_ack(void __iomem *regs)
{
u32 val;
@@ -429,6 +483,29 @@ static void rk_tsadcv2_tshut_mode(int chn, void __iomem *regs,
writel_relaxed(val, regs + TSADCV2_INT_EN);
}

+static const struct rockchip_tsadc_chip rk3228_tsadc_data = {
+ .chn_id[SENSOR_CPU] = 0, /* cpu sensor is channel 0 */
+ .chn_num = 1, /* one channel for tsadc */
+
+ .tshut_mode = TSHUT_MODE_GPIO, /* default TSHUT via GPIO give PMIC */
+ .tshut_polarity = TSHUT_LOW_ACTIVE, /* default TSHUT LOW ACTIVE */
+ .tshut_temp = 95000,
+
+ .initialize = rk_tsadcv2_initialize,
+ .irq_ack = rk_tsadcv1_irq_ack,
+ .control = rk_tsadcv2_control,
+ .get_temp = rk_tsadcv2_get_temp,
+ .set_tshut_temp = rk_tsadcv2_tshut_temp,
+ .set_tshut_mode = rk_tsadcv2_tshut_mode,
+
+ .table = {
+ .id = v1_code_table,
+ .length = ARRAY_SIZE(v1_code_table),
+ .data_mask = TSADCV3_DATA_MASK,
+ .mode = ADC_DECREMENT,
+ },
+};
+
static const struct rockchip_tsadc_chip rk3288_tsadc_data = {
.chn_id[SENSOR_CPU] = 1, /* cpu sensor is channel 1 */
.chn_id[SENSOR_GPU] = 2, /* gpu sensor is channel 2 */
@@ -479,6 +556,10 @@ static const struct rockchip_tsadc_chip rk3368_tsadc_data = {

static const struct of_device_id of_rockchip_thermal_match[] = {
{
+ .compatible = "rockchip,rk3228-tsadc",
+ .data = (void *)&rk3228_tsadc_data,
+ },
+ {
.compatible = "rockchip,rk3288-tsadc",
.data = (void *)&rk3288_tsadc_data,
},
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/