[PATCH 12/13] ARM: mvebu: add buffer manager nodes to armada-xp.dtsi

From: Marcin Wojtas
Date: Sun Nov 22 2015 - 02:55:21 EST


Armada XP network controller supports hardware buffer management (BM).
Since it is now enabled in mvneta driver, appropriate nodes can be added
to armada-xp.dtsi - for the actual common BM unit (bm@c0000) and its
internal SRAM (bm-bppi), which is used for indirect access to buffer
pointer ring residing in DRAM.

Pools - ports mapping, bm-bppi entry in 'soc' node's ranges and optional
parameters are supposed to be set in board files.

Signed-off-by: Marcin Wojtas <mw@xxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-xp.dtsi | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index be23196..bd45936 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -253,6 +253,14 @@
marvell,crypto-sram-size = <0x800>;
};

+ bm: bm@c0000 {
+ compatible = "marvell,armada-380-neta-bm";
+ reg = <0xc0000 0xac>;
+ clocks = <&gateclk 13>;
+ internal-mem = <&bm_bppi>;
+ status = "disabled";
+ };
+
xor@f0900 {
compatible = "marvell,orion-xor";
reg = <0xF0900 0x100
@@ -291,6 +299,16 @@
#size-cells = <1>;
ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
};
+
+ bm_bppi: bm-bppi {
+ compatible = "mmio-sram";
+ reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&gateclk 13>;
+ status = "disabled";
+ };
};

clocks {
--
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/