Re: [PATCH v3 5/9] ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator nodes

From: Chen-Yu Tsai
Date: Fri Nov 20 2015 - 12:24:54 EST


On Fri, Nov 20, 2015 at 7:12 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> On Tue, Nov 17, 2015 at 12:38:24AM +0800, Chen-Yu Tsai wrote:
>> This board has a X-Powers AXP223 PMIC connected via RSB. Its regulators
>> provide power to various parts of the SoC and the board.
>>
>> Also update the regulator supply phandles.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
>> ---
>> arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 79 +++++++++++++++++++++++++-
>> 1 file changed, 76 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
>> index 13ce68f06dd6..91a0fde47fdd 100644
>> --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
>> +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts
>> @@ -68,7 +68,7 @@
>> };
>>
>> &lradc {
>> - vref-supply = <&reg_vcc3v0>;
>> + vref-supply = <&reg_dcdc1>;
>> status = "okay";
>>
>> button@200 {
>> @@ -96,7 +96,7 @@
>> &mmc0 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina33>;
>> - vmmc-supply = <&reg_vcc3v0>;
>> + vmmc-supply = <&reg_dcdc1>;
>> bus-width = <4>;
>> cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
>> cd-inverted;
>> @@ -106,7 +106,7 @@
>> &mmc2 {
>> pinctrl-names = "default";
>> pinctrl-0 = <&mmc2_8bit_pins>;
>> - vmmc-supply = <&reg_vcc3v0>;
>> + vmmc-supply = <&reg_dcdc1>;
>> bus-width = <8>;
>> non-removable;
>> status = "okay";
>> @@ -132,6 +132,79 @@
>>
>> &r_rsb {
>> status = "okay";
>> +
>> + axp22x: pmic@3e3 {
>> + compatible = "x-powers,axp223";
>> + reg = <0x3e3>;
>> + interrupt-parent = <&nmi_intc>;
>> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
>> + eldoin-supply = <&reg_dcdc1>;
>> + };
>> +};
>> +
>> +#include "axp22x.dtsi"
>> +
>> +&reg_aldo1 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-name = "vcc-io";
>> +};
>> +
>> +&reg_aldo2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <2350000>;
>> + regulator-max-microvolt = <2650000>;
>> + regulator-name = "vdd-dll";
>> +};
>> +
>> +&reg_aldo3 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <2700000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-name = "vcc-pll-avcc";
>> +};
>> +
>> +&reg_dc5ldo {
>> + regulator-always-on;
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-cpus";
>> +};
>> +
>> +&reg_dcdc1 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-name = "vcc-3v0";
>> +};
>> +
>> +&reg_dcdc2 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-sys";
>> +};
>> +
>> +&reg_dcdc3 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-name = "vdd-cpu";
>> +};
>> +
>> +&reg_dcdc5 {
>> + regulator-always-on;
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-name = "vcc-dram";
>> +};
>> +
>> +&reg_rtc_ldo {
>> + regulator-always-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> + regulator-name = "vcc-rtc";
>> };
>
> Isn't this supposed to be in the AXP DTSI?

Are you referring to &reg_rtc_ldo? Yes, it should. I'll do a new version.

Thanks
ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/