Re: [PATCH] extcon: arizona: Update naming for second jack detection DT binding

[Rob Herring]

On Fri, Nov 20, 2015 at 08:53:59AM +0000, Charles Keepax wrote:
> Update the name for the second jack detection pin binding to be a little
> less confusing.

This breaks compatibility with old dtbs. Either the driver needs to 
support both names or you just have to live with the old name.

> 
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/extcon/extcon-arizona.txt  |    4 ++--
>  drivers/extcon/extcon-arizona.c                    |    4 ++--
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> index 03fa7b7..da9813b 100644
> --- a/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> +++ b/Documentation/devicetree/bindings/extcon/extcon-arizona.txt
> @@ -14,9 +14,9 @@ Optional properties:
>      If this node is not mentioned or if the value is unknown, then
>      headphone detection mode is set to HPDETL.
>  
> -  - wlf,use-jd-gpio : Use GPIO input along with JD1 for dual pin jack
> +  - wlf,use-jd2 : Use the additional JD input along with JD1 for dual pin jack
>      detection.
> -  - wlf,use-jd-gpio-nopull : Internal pull on GPIO is disabled when used for
> +  - wlf,use-jd2-nopull : Internal pull on JD2 is disabled when used for
>      jack detection.
>    - wlf,jd-invert : Invert the polarity of the jack detection switch
>  
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index 7c9598d..c377030 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -1245,9 +1245,9 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona)
>  	device_property_read_u32(arizona->dev, "wlf,gpsw", &pdata->gpsw);
>  
>  	pdata->jd_gpio5 = device_property_read_bool(arizona->dev,
> -						    "wlf,use-jd-gpio");
> +						    "wlf,use-jd2");
>  	pdata->jd_gpio5_nopull = device_property_read_bool(arizona->dev,
> -						"wlf,use-jd-gpio-nopull");
> +						"wlf,use-jd2-nopull");
>  
>  	return 0;
>  }
> -- 
> 1.7.2.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/