[PATCH 3/3 v2] dl2k: Implement suspend

[Ondrej Zary]

Add suspend/resume support to dl2k driver.
Tested on Asus NX1101 (IP1000A) and D-Link DGE-550T (DL-2000).

Signed-off-by: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/dlink/dl2k.c |   55 +++++++++++++++++++++++++++++++++++--
 1 file changed, 53 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c
index 9e9baa0..28a96d3 100644
--- a/drivers/net/ethernet/dlink/dl2k.c
+++ b/drivers/net/ethernet/dlink/dl2k.c
@@ -464,14 +464,21 @@ static void free_list(struct net_device *dev)
 	}
 }
 
+static void rio_reset_ring(struct netdev_private *np)
+{
+	np->cur_rx = 0;
+	np->cur_tx = 0;
+	np->old_rx = 0;
+	np->old_tx = 0;
+}
+
  /* allocate and initialize Tx and Rx descriptors */
 static int alloc_list(struct net_device *dev)
 {
 	struct netdev_private *np = netdev_priv(dev);
 	int i;
 
-	np->cur_rx = np->cur_tx = 0;
-	np->old_rx = np->old_tx = 0;
+	rio_reset_ring(np);
 	np->rx_buf_sz = (dev->mtu <= 1500 ? PACKET_SIZE : dev->mtu + 32);
 
 	/* Initialize Tx descriptors, TFDListPtr leaves in start_xmit(). */
@@ -1824,11 +1831,55 @@ rio_remove1 (struct pci_dev *pdev)
 	}
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int rio_suspend(struct device *device)
+{
+	struct net_device *dev = dev_get_drvdata(device);
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return 0;
+
+	netif_device_detach(dev);
+	del_timer_sync(&np->timer);
+	rio_hw_stop(dev);
+
+	return 0;
+}
+
+static int rio_resume(struct device *device)
+{
+	struct net_device *dev = dev_get_drvdata(device);
+	struct netdev_private *np = netdev_priv(dev);
+
+	if (!netif_running(dev))
+		return 0;
+
+	rio_reset_ring(np);
+	rio_hw_init(dev);
+	np->timer.expires = jiffies + 1 * HZ;
+	add_timer(&np->timer);
+	netif_device_attach(dev);
+	dl2k_enable_int(np);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rio_pm_ops, rio_suspend, rio_resume);
+#define RIO_PM_OPS    (&rio_pm_ops)
+
+#else
+
+#define RIO_PM_OPS	NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
 static struct pci_driver rio_driver = {
 	.name		= "dl2k",
 	.id_table	= rio_pci_tbl,
 	.probe		= rio_probe1,
 	.remove		= rio_remove1,
+	.driver.pm	= RIO_PM_OPS,
 };
 
 module_pci_driver(rio_driver);
-- 
Ondrej Zary

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/